Produktai skirti duja (47)

ASCO CO2 Gas Revert Recovery Systems are engineered to efficiently recover the revert CO2 gas from ASCO Dry Ice Pellet and Block Machines which normally direct the revert (flash) gas to the atmosphere. When dry ice is produced the conversion rate from liquid CO2 to dry ice is approx. 4045 %. This means 5560 % is lost to the atmosphere. This conversation rate is a physical fact and therefore, unfortunately, not to change. With a CO2 Revert Recovery System, however, most of the CO2 can be recovered which leads to a final conversion rate of approx. 9095 %. This way, the dry ice production costs are reduced up to 50 %. Fully automatic:Automatic (PLC) operation Design:Heavy duty, compact and efficient design Installation:Packaged, prepiped and prewired for timely installation Capacities:300 kg/h - 2'000 kg/h revert CO2 gas (larger sizes available on request)

The IST AG FS7.4W gas flow sensor has been developed for applications with temperatures up to 400 °C. The design of the FS7.4W is based on the FS7 design which offers a symmetrical heater that enhances sensitivity. The FS7.4W flow sensor is applicable in gas and offers excellent long-term stability. The small thermal mass of the FS7.4W sensor provides a fast response time. Further advantages of the FS7.4W thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request The IST AG FS7.4W flow sensors are optimal for measuring gas flow in various flow applications.

De la vente à l'installation, nous offrons des solutions complètes pour alimenter les véhicules à hydrogène. Nos stations de ravitaillement en hydrogène clé en main, à base de liquide ou de gaz, sont des systèmes modulaires, pré-testés (FAT) et prêts à être installés avant expédition, garantissant un temps de mise en service minimal. Construites et conçues selon les dernières avancées technologiques et les normes européennes, nos solutions incluent la certification CE, l'approbation MID et le protocole de ravitaillement SAE J2601.

SMLD 300, THE SMALLEST With a minimum grid width of just 4.5 mm (with a special coil package even only 4 mm), the micro valves SMLD 300 are suitable for the tightest of spaces. Low-viscosity media can be dispensed with small flow rates. This type of valve offers a small internal volume of only 25 µl. VALVE COILS The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size. VALVE INSTALLATION Fastening type cylindrical: Grid width with highest resolution, small size. Suitable to our adapter nozzles. The thread fastening is designed to allow an easy exchange of the micro valves. especially suited when the micro valves should be as easy to exchange as possible. The micro valve can be exchanged quickly and without dismantling the entire valve holder and without disconnecting the electric connections. Maximum pressure:35 - 40 bar (configuration dependant) Life-time:up to 500 million cycles Viscosity range:1 - 200 mPa.s Maximum flow rate (water, 1 bar) :4 - 18 ml/min (configuration dependant) Minimal dispensing volume:under 10 nl possible Inner volume:25 µl Built-in filter:Filter 17 µm or without filter Materials in contact with medium :Stainless steels: 1.4404, 1.4301, 1.4310, 1.4105 IL / PEEK, sapphire, ruby Typical response time:200 - 320 µs Maximum dispensing fre-quency:up to 4000 Hz Coil resistance:11 Ohm Coil inductance (valve coil mounted on micro valve):1.23 mH Maximum permissible coil temperature:100° C Electric connection:Soldering pins / 300 mm wire, tin-plated or with plug, 2-pin, Molex type 70066-176 Recommended peak current:0.8 – 1.2 A (default 1A) during 150 – 400 µs Recommended holding current:80 - 220 mA (0.9 – 2.4 V DC) (default 200 mA) no time limit Micro valve weight with valve coil:1.9 g Repeat accuracy:< 5% CV Minimum pattern width:4 mm Dispensable media :Gases, aqueous media, reagents, cells, detergents, solvents, inks, varnish, oils, greases, adhesives

"SWISS COMBI – Hochtemperatur Wärmetauscher werden eingesetzt um Heissgas bis zu ca. 550°C zu erreichen. Dabei wird aus Rauchgas, entweder direkt aus einem Brenner oder aus Prozessen Wärme indirekt auf ein anderes Gas, beispielsweise überhitzter Dampf oder Umgebungsluft übertragen. Dabei entstehen Temperaturen rauchgasseitig bis zu 900°C, Prozessgasseitig bis zu ca. 550°C. Einsatzgebiete: Erhitzen von Trocknungsmedien, Wärmerückgewinnung aus Hochtemperatur-Abgas "

Prozesswärme bis zu 1200°C (2190°F)

Gaswarngerät mit bis zu fünf Sensoren. Der AREA RAE verfügt über ein RF-Modem für die Funkkommunikation und Echtzeitübertragung von Messergebnissen. Die Daten werden hierbei an eine entfernte Basisstation übertragen.

Mit Tunable Diode Laser und SIL2-Konformität - Neue Ansätze für die Gasanalytik. GPro 500 TDL-Serie Interferenz- sowie driftfreie TDL-Technologie sorgt für bessere Prozesskontrolle und geringere Wartungskosten. Allerdings wird die zuverlässige Messung mit einem TDL oft durch notwendige Bedingungen wie minimale Länge des optischen Pfads, das Vorhandensein eines Spülgases und/oder die maximale Staublast beeinträchtigt. Unter Berücksichtigung dieser Einschränkungen hat METTLER TOLEDO eine spezielle Prozessschnittstelle entwickelt, mit der die TDL-Lösung in wesentlich mehr Anwendungsbereichen eingesetzt werden kann. Basierend auf dem Prinzip des gefalteten Strahlengangs sind die kompakten TDL-Spektrometer und einzigartigen Prozessadaptionen für Prozess-, Sicherheits-, Verbrennungs- und Dampfrückgewinnungsanwendungen wichtige Instrumente zur Verbesserung Ihrer Prozesse: - Flexible Überwachung Ihrer Prozesse - Leichtere Feldoperationen - Leistung für mehr Wettbewerbsfähigkeit

The ASCO CO2 Gas Purity Tester has been designed to measure the purity of CO2 up to 99.995 % in a quick, easy and reliable way. Essential for bottling plants, breweries, beverage manufacturers and industrial gas companies. The complete kit contains all equipment for a simple, safe and fast CO2 gas purity test and is complete with easy instructions (step by step pictures on a laminated A3 sheet). The ASCO CO2 Gas Purity Tester (stainless steel) can be used either wallmounted or free standing. ASCO CO2 Purity Tester pair of protective gloves protective glasses two plastic containers flexible hose

ASCO CO2 Gas Detectors are used to protect personnel wherever CO2 gas or dry ice is used in closed areas, for example during dry ice blasting or when producing dry ice. ASCO offers wallmounted solutions for area monitoring and portable devices for personal protection. ASCO CO2 Gas Detectors ensure continuous and automatic CO2 content measuring in the ambient air using infrared absorption measuring (NDIR). This technology is very troubleresistant to temperature variations or air draughts and therefore measures very accurately. The CO2 gas detectors are very simple to handle and all components are built splash proof. Detector AGS Material box:plastic (IP54) Detector AGS Voltage / Power supply / DC:9 - 32 VDC (12 – 32 VDC recommended), 2 A Detector AGS Max power consumption:approx. 2 W Detector AGS Relay preliminary alarm/alarm:below 2 A at 30 VDC or 250 VAC, SPDT Detector AGS Analog output signal:4 - 20 mA Sensor Material box:plastic (IP54) Sensor Gas entry:diffusion Sensor Measuring range:0 - 5 Vol. % CO2 (0 - 50.000 ppm) Sensor Accuracy:0.1 Vol. % CO 2 (+ - 100 ppm or + - 5%) Sensor Operating temperature:0 to +50 ° C Detector AGP Alarm settings:3 thresholds Detector AGP Alarm signals:audible, visual, vibrating Detector AGP Dimensions:98 x 50 x 42 mm (3.9 x 2.0 x 1.7 in) Detector AGP Weight:approx. 0.14 kg (0.3 lb) Detector AGP Material:plastic material (IP54) Detector AGP Operating conditions:0° - 50°C Detector AGP Warm up time:approx. 5 sec Detector AGP Resolution:1ppm; 0.01 vol% CO 2 Detector AGP Accuracy:±40ppm / ±3% reading Detector AGP Gas entry:diffusion Detector AGP Measuring range:0-5 vol% CO2 Detector AGP Calibration interval:1 year Detector AGP Calibration method:Nitrogen or ambient air

The IST AG FS2 flow sensors are applicable in gas and offer excellent long-term stability. In addition to measuring flow rates, the FS2 gas flow sensor is able to detect flow direction with outstanding sensitivity. Further advantages of the FS2 thermal mass flow sensor include: — Simple signal processing — Simple calibration — Bare sensor resists up to +450 °C (customer specific) — Stable platinum technology — Excellent reproducibility — No moving mechanical parts — Customer-specific sensor available upon request The IST AG FS2 flow sensors are optimal for measuring gas flow and direction.

Das IST AG SFS01 EvaKit bietet eine einfache Auswertung des SFS01 Gasflusssensors. Es verfügt über einen analogen und digitalen Ausgang (I2C) und ermöglicht eine schnelle und flexible Auswertung des SFS01 Sensors. Der I2C-Ausgang beinhaltet sowohl Rohwerte als auch kalibrierte Durchflusswerte von 0 bis +- 200 sccm. Weitere Vorteile des SFS01 EvaKit: — Hervorragende Messdynamik — Analoge Ausgabe des Rohsignals — Digitalausgang mit Rohsignal und vollständig kalibriertem Signal — Integrierter Strömungskanal mit pneumatischen Anschlüssen Technologie:digital Anwendung:für Flüssigkeiten, für Gas Weitere Eigenschaften:elektronisch

Fast and compact flow module, suitable for gas dosing systems, manifolds and analysers. Easy to integrate with compact design, factory calibration and pins for HW address setting This module is also available with different flow rate ranges: +/- 200 sccm: > request product now +/- 50 sccm: > request product now

The IST AG FS7 thermal mass flow sensors are the successors of the FS5 flow sensors and exhibit a symmetrical heater design and enhanced sensitivity. The FS7 flow sensor is applicable in gas and offer excellent long-term stability. The small thermal mass of the FS7 sensor provides a fast response time. Additionally, the standard FS7 sensor is also available with a housing which is easily implemented into various applications. Further advantages of the FS7 thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request. The IST AG FS7 flow sensors are optimal for measuring gas flow in various flow applications.

Dieses Modul ist auch mit verschiedenen Durchflussbereichen erhältlich: +/- 200 sccm: > Jetzt Produkt anfragen +/- 50 sccm: > Jetzt Produkt anfragen

For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. It has a plastic housing for fast mounting into a flow channel Technology:anemometric Applications:For measuring flow rates using a symmetrical heater design

The IST AG SFS01 EvaKit offers an easy evaluation of the SFS01 gas flow sensor. It has both analog and digital output (I2C) and allows a fast and flexible evaluation of the SFS01 sensor. The I2C output includes both raw values and calibrated flow values from 0 to +-200 sccm. Further advantages of the SFS01 EvaKit include: — Excellent measuring dynamics — Analog output of raw signal — Digital output with raw signal and fully calibrated signal — Integrated flow channel with pneumatic connections Technology:digital Applications:for liquids, for gas Other characteristics:electronic