Produktai skirti duja (17)

ASCO’s innovative ASCOSORB CO2 Stack Gas Recovery Technology turns your vent flue gas into a usable and profitable source of CO2. CO2 gas won by an ASCO Stack Gas Recovery System is a byproduct of flue gas production from boilers as well as from other flue gas sources offering an economic CO2 source to any CO2 consumer or reseller. ASCO, as a provider of complete CO2 solutions, offers CO2 Stack Gas Recovery Systems with various capacities. Reliable CO2 source Reliable and economic source of CO2 to the end user as opposed to self burning processes or purchasing liquid CO2 Reduction in energy usage The ASCOSORB Technology brings to the ASCO CO2 Stack Gas Recovery Plant tremendous reduction in total energy usage offering greatly reduced OPEX only approx. 1.3 MWth / MT produced CO2

Der IST AG FS2 Strömungssensor wird zur Messung von Gasen eingesetzt und bietet eine hervorragende Langzeitstabilität. Zusätzlich zur Messung der Strömungsrate, kann der FS2 die Strömungsrichtung mit einer hervorragenden Empfindlichkeit feststellen. Weitere Vorteile des FS2 Strömungssensors sind: — Einfache Signalauswertung — Einfache Kalibrierung — Ungeschütztes Sensorelement widersteht bis zu +450 °C (kundenspezifisch) — Stabile Platin-Technologie — Exzellente Reproduzierbarkeit — Keine bewegten mechanischen Teile Der IST AG FS2 Strömungssensor eignet sich hervorragend für die Messung von Gasströmungen und deren Richtung.

2 oder 4 Takt Gerätebenzin gesucht? Wir haben beides. Die anwendungsfertigen Gerätebenzine von Oest und Storz für 2- und 4-Taktmotoren haben sich seit Jahren bewährt. Denn mit unseren Gerätebenzinen ist man auf der sicheren Seite – bei allen luftgekühlten 2-Takt- und 4-Takt-Motoren sämtlicher Marken, sowohl bei Geräten mit hohen als auch niedrigen Betriebstemperaturen.

Oil-free piston compressor, Gas-tight design with integrated motor, Compressor block leak rate < 0.0001 mbar l/s, Air-cooled, Motor powers from 0.5 to 2.2 kW, Rotary speed range 970 to 1740 RPM, Suction pressure max. 20 bar, Final discharge pressure max. 60 bar, Modular cylinder configuration with cylinder diameter from 26 to 75 mm, Version with 1 cylinder for 1-stage compression, Maximum flow rate at atmospheric suction pressure ca. 10 m3/h, Booster-variant flow rate max. ca. 50 m3/h, OEM-integrated version available without pipework and instrumentation for integration in an OEM system, Very robust and long-lasting construction, Compact and foundation-free installation, Oil-free booster compression of nitrogen and air (CDA = Clean Dry Air), Oil-free recovery and compression of SF6 gas, Oil-free booster compression and recovery of helium, Oil-free compression of other gases as refrigerants, argon and carbon dioxid.

Spannungsarmglühen I Weichglühen I Lösungsglühen I Rekristallisationsglühen I Normalisieren I Ausscheidungshärten/Auslagern von Nichteisenmetallen Anwendungen: • Härten, Vergüten, Anlassen in neutraler Schutzgasatmosphäre • Aufkohlen, Einsatzhärten in kohlenstoffabgebender Gasatmosphäre für unlegierte und niedriglegierte Stahlbauteile • Carbonitrieren in kohlenstoff- und stickstoffabgebender Gasatmosphäre für unlegierte Stahlbauteile

Gasmessfühler mit elektrochemischer Messzelle (CO 0 - 300 ppm / NO2 0 - 20 ppm) Niedrige Querempfindlichkeit gegenüber anderen Gasen, Lineares Ausgangssignal, hohe Genauigkeit und Elektromagnetisch, mechanisch und staubdicht gekapselt.

ASCO CO2 Gas Revert Recovery Systems are engineered to efficiently recover the revert CO2 gas from ASCO Dry Ice Pellet and Block Machines which normally direct the revert (flash) gas to the atmosphere. When dry ice is produced the conversion rate from liquid CO2 to dry ice is approx. 4045 %. This means 5560 % is lost to the atmosphere. This conversation rate is a physical fact and therefore, unfortunately, not to change. With a CO2 Revert Recovery System, however, most of the CO2 can be recovered which leads to a final conversion rate of approx. 9095 %. This way, the dry ice production costs are reduced up to 50 %. Fully automatic:Automatic (PLC) operation Design:Heavy duty, compact and efficient design Installation:Packaged, prepiped and prewired for timely installation Capacities:300 kg/h - 2'000 kg/h revert CO2 gas (larger sizes available on request)

The ASCO CO2 Gas Purity Tester has been designed to measure the purity of CO2 up to 99.995 % in a quick, easy and reliable way. Essential for bottling plants, breweries, beverage manufacturers and industrial gas companies. The complete kit contains all equipment for a simple, safe and fast CO2 gas purity test and is complete with easy instructions (step by step pictures on a laminated A3 sheet). The ASCO CO2 Gas Purity Tester (stainless steel) can be used either wallmounted or free standing. ASCO CO2 Purity Tester pair of protective gloves protective glasses two plastic containers flexible hose

ASCO CO2 Gas Detectors are used to protect personnel wherever CO2 gas or dry ice is used in closed areas, for example during dry ice blasting or when producing dry ice. ASCO offers wallmounted solutions for area monitoring and portable devices for personal protection. ASCO CO2 Gas Detectors ensure continuous and automatic CO2 content measuring in the ambient air using infrared absorption measuring (NDIR). This technology is very troubleresistant to temperature variations or air draughts and therefore measures very accurately. The CO2 gas detectors are very simple to handle and all components are built splash proof. Detector AGS Material box:plastic (IP54) Detector AGS Voltage / Power supply / DC:9 - 32 VDC (12 – 32 VDC recommended), 2 A Detector AGS Max power consumption:approx. 2 W Detector AGS Relay preliminary alarm/alarm:below 2 A at 30 VDC or 250 VAC, SPDT Detector AGS Analog output signal:4 - 20 mA Sensor Material box:plastic (IP54) Sensor Gas entry:diffusion Sensor Measuring range:0 - 5 Vol. % CO2 (0 - 50.000 ppm) Sensor Accuracy:0.1 Vol. % CO 2 (+ - 100 ppm or + - 5%) Sensor Operating temperature:0 to +50 ° C Detector AGP Alarm settings:3 thresholds Detector AGP Alarm signals:audible, visual, vibrating Detector AGP Dimensions:98 x 50 x 42 mm (3.9 x 2.0 x 1.7 in) Detector AGP Weight:approx. 0.14 kg (0.3 lb) Detector AGP Material:plastic material (IP54) Detector AGP Operating conditions:0° - 50°C Detector AGP Warm up time:approx. 5 sec Detector AGP Resolution:1ppm; 0.01 vol% CO 2 Detector AGP Accuracy:±40ppm / ±3% reading Detector AGP Gas entry:diffusion Detector AGP Measuring range:0-5 vol% CO2 Detector AGP Calibration interval:1 year Detector AGP Calibration method:Nitrogen or ambient air

The IST AG FS7.4W gas flow sensor has been developed for applications with temperatures up to 400 °C. The design of the FS7.4W is based on the FS7 design which offers a symmetrical heater that enhances sensitivity. The FS7.4W flow sensor is applicable in gas and offers excellent long-term stability. The small thermal mass of the FS7.4W sensor provides a fast response time. Further advantages of the FS7.4W thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request The IST AG FS7.4W flow sensors are optimal for measuring gas flow in various flow applications.

The IST AG FS2 flow sensors are applicable in gas and offer excellent long-term stability. In addition to measuring flow rates, the FS2 gas flow sensor is able to detect flow direction with outstanding sensitivity. Further advantages of the FS2 thermal mass flow sensor include: — Simple signal processing — Simple calibration — Bare sensor resists up to +450 °C (customer specific) — Stable platinum technology — Excellent reproducibility — No moving mechanical parts — Customer-specific sensor available upon request The IST AG FS2 flow sensors are optimal for measuring gas flow and direction.

Das IST AG SFS01 EvaKit bietet eine einfache Auswertung des SFS01 Gasflusssensors. Es verfügt über einen analogen und digitalen Ausgang (I2C) und ermöglicht eine schnelle und flexible Auswertung des SFS01 Sensors. Der I2C-Ausgang beinhaltet sowohl Rohwerte als auch kalibrierte Durchflusswerte von 0 bis +- 200 sccm. Weitere Vorteile des SFS01 EvaKit: — Hervorragende Messdynamik — Analoge Ausgabe des Rohsignals — Digitalausgang mit Rohsignal und vollständig kalibriertem Signal — Integrierter Strömungskanal mit pneumatischen Anschlüssen Technologie:digital Anwendung:für Flüssigkeiten, für Gas Weitere Eigenschaften:elektronisch

Fast and compact flow module, suitable for gas dosing systems, manifolds and analysers. Easy to integrate with compact design, factory calibration and pins for HW address setting This module is also available with different flow rate ranges: +/- 200 sccm: > request product now +/- 50 sccm: > request product now

The IST AG FS7 thermal mass flow sensors are the successors of the FS5 flow sensors and exhibit a symmetrical heater design and enhanced sensitivity. The FS7 flow sensor is applicable in gas and offer excellent long-term stability. The small thermal mass of the FS7 sensor provides a fast response time. Additionally, the standard FS7 sensor is also available with a housing which is easily implemented into various applications. Further advantages of the FS7 thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request. The IST AG FS7 flow sensors are optimal for measuring gas flow in various flow applications.

Dieses Modul ist auch mit verschiedenen Durchflussbereichen erhältlich: +/- 200 sccm: > Jetzt Produkt anfragen +/- 50 sccm: > Jetzt Produkt anfragen

For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. It has a plastic housing for fast mounting into a flow channel Technology:anemometric Applications:For measuring flow rates using a symmetrical heater design

The IST AG SFS01 EvaKit offers an easy evaluation of the SFS01 gas flow sensor. It has both analog and digital output (I2C) and allows a fast and flexible evaluation of the SFS01 sensor. The I2C output includes both raw values and calibrated flow values from 0 to +-200 sccm. Further advantages of the SFS01 EvaKit include: — Excellent measuring dynamics — Analog output of raw signal — Digital output with raw signal and fully calibrated signal — Integrated flow channel with pneumatic connections Technology:digital Applications:for liquids, for gas Other characteristics:electronic