Produktai skirti duja (6)

Spent Catalysts sind Filter und bestehen aus einer porösen Metallkeramik mit einer grossen inneren Oberfläche, ähnlich wie Aktivkohle. Sie werden in chemischen und petrochemischen Prozessen zur Reinigung oder Veredelung von Gasen eingesetzt. Verbrauchte Katalysatoren enthalten nebst bis zu 15% Quecksilber auch bis zu 40% Schwefel. Katalysatoren, die zur Entfernung von Quecksilber aus Erdgas eingesetzt werden, können dem Metallrecycling oder der Wiederverwendung erst nach einer Vorbehandlung zugeführt werden.

Gas.- Lufterhitzer für saubere Gasströme bis zu 1200°C. Standard-Leistungen 3,5 KW bis 40 kW. Standard-Volumenströme bis 100 Nm³/h

SMLD 300G, THE FLEXIBLE ONE With a minimum grid width of 6 mm, the SMLD 300G is very space-saving, while offering maximum flexibility. These micro valves are suitable for a wide range of viscosities and are available in many configurations. Valve holder with integrated heating can also be combined with it. The internal volume is 65 µl. The R (Resistant) type offers crucial benefits in regards of corrosion and the handling of aggressive medias, compared to SMLD 300G, but remains fully compatible in size and function for all SMLD products and components. VALVE COILS The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size. VALVE INSTALLATION Fastening type cylindrical: Grid width with highest resolution, small size. Suitable to our adapter nozzles. The thread fastening is designed to allow an easy exchange of the micro valves. especially suited when the micro valves should be as easy to exchange as possible. Maximum pressure:25 - 70 bar (configuration dependant) Life-time:up to 500 million cycles Viscosity range:1 - 1000 mPa.s Maximum flow rate (water, 1 bar) :4 - 100 ml/min (configuration dependant) Minimal dispensing volume:under 10 nl possible Inner volume:65 µl Built-in filter:Filter 40 µm or without filter Materials in contact with medium :Stainless steels: 1.4404, 1.4301, 1.4310, 1.4105 IL / PEEK, sapphire, ruby Typical response time:200 - 450 µs Maximum dispensing fre-quency:up to 4000 Hz Coil resistance:6 Ohm Coil inductance (valve coil mounted on micro valve):0.8 mH Maximum permissible coil temperature:100° C Electric connection:Soldering pins / 300 mm wire, tin-plated or with plug, 2-pin, Molex type 70066-176 Recommended peak current:0.8 – 1.2 A (default 1A) during 150 – 1000 µs Recommended holding current:160 - 330 mA (1.0 – 2.0 V DC) (default 200 mA) no time limit Micro valve weight with valve coil:3.1 g Repeat accuracy:< 5% CV Minimum pattern width:6 mm Dispensable media :Gases, aqueous media, reagents, cells, detergents, solvents, inks, varnish, oils, greases, adhesives

Une pelle antidéflagrante avec un design pratique: - Angle de pénétration - Matériau sans béryllium et très solide - Manche en fibre de verre longue recouvert de polyamide - possibilité de manche court avec poignée - possibilité de lame avec forme carrée - Garantie à vie (manche et lame)

SMLD 300, THE SMALLEST With a minimum grid width of just 4.5 mm (with a special coil package even only 4 mm), the micro valves SMLD 300 are suitable for the tightest of spaces. Low-viscosity media can be dispensed with small flow rates. This type of valve offers a small internal volume of only 25 µl. VALVE COILS The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size. VALVE INSTALLATION Fastening type cylindrical: Grid width with highest resolution, small size. Suitable to our adapter nozzles. The thread fastening is designed to allow an easy exchange of the micro valves. especially suited when the micro valves should be as easy to exchange as possible. The micro valve can be exchanged quickly and without dismantling the entire valve holder and without disconnecting the electric connections. Maximum pressure:35 - 40 bar (configuration dependant) Life-time:up to 500 million cycles Viscosity range:1 - 200 mPa.s Maximum flow rate (water, 1 bar) :4 - 18 ml/min (configuration dependant) Minimal dispensing volume:under 10 nl possible Inner volume:25 µl Built-in filter:Filter 17 µm or without filter Materials in contact with medium :Stainless steels: 1.4404, 1.4301, 1.4310, 1.4105 IL / PEEK, sapphire, ruby Typical response time:200 - 320 µs Maximum dispensing fre-quency:up to 4000 Hz Coil resistance:11 Ohm Coil inductance (valve coil mounted on micro valve):1.23 mH Maximum permissible coil temperature:100° C Electric connection:Soldering pins / 300 mm wire, tin-plated or with plug, 2-pin, Molex type 70066-176 Recommended peak current:0.8 – 1.2 A (default 1A) during 150 – 400 µs Recommended holding current:80 - 220 mA (0.9 – 2.4 V DC) (default 200 mA) no time limit Micro valve weight with valve coil:1.9 g Repeat accuracy:< 5% CV Minimum pattern width:4 mm Dispensable media :Gases, aqueous media, reagents, cells, detergents, solvents, inks, varnish, oils, greases, adhesives

Prozesswärme bis zu 1200°C (2190°F)