Produktai skirti diržas (300)

Keiper’s series of STABILOFLEX conveyor and process belts is available in 1-/ 2- or 3-layered polyester fabrics, with a PVC coating or PVC interlayer, and in a variety of colors depending on the application and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approval and compliance with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

PVC conveyor belt 2-ply petrol, structure Gittergrip

PU timing belts with silicone coating

Drahtösen-Gliederband mit verschweißter oder versplinteter Kante in blanker, verzinkter oder rostfreier Ausführung. Teilung: 25,4; 30; 50; 50,8; 75; 100 mm Ösendraht - Ø: 1,4 bis 6,0 mm Querstab - Ø: 4,0 bis 16,0 mm

PVC conveyor belt 2-ply white, structure Nop

PVC conveyor belt 2-ply white

PU conveyor belt 2-ply white, structure

The Keiper UNITRANS conveyor belt series can be fitted with numerous different cleats and entraining elements. Cleats and entraining elements are used for ascending or descending conveyor systems, linear movements and whenever lateral forces occur. With these elements it is easier to carry along, transport and place the products to be conveyed. Conveyor belt cleats made of PVC and PU – with or without fabric interlayers – in blue, white, green, petrol or transparent. Depending on the design, they are resistant to oil and grease, have FDA/EU approval. PVC/PU cleats made of belt material can be produced in a straight design or with an inclination of approximately 60° or 80° respectively. We also have a wide range of special cleats such as, for example: PVC 60° Shore A, closed-loop cleats, profiled cleats made of belt material, fabric and felt cleats, and special forms based on the customer’s requirements.

PVC conveyor belt 2-ply black, structure Längsrille

PVC conveyor belt 2-ply black with felt top

PVC conveyor belt 2-ply petrol, structure Supergrip

Polyester felt belt antistatic

PVC conveyor belt 1-ply petrol

PU timing belt AT-Pitch  AT3 / AT5 / AT10 / AT20

Overview to the technical datas of KEIPER conveyor belt product range STABILOFLEX

PU timing belt T-Pitch T2,5 / T5 / T10 / T20

Flush-grid belt conveyors should be selected particularly for high output. They are easy to assemble and replace

Neoprene endless molded timing belts (form belts)  MXL

PVC conveyor belt 2-ply white, structure Sawthooth

PU conveyor belt 2-ply white

Keiper PU molded timing belts (form belts), which are cast in special molds, are made of abrasion-resistant polyurethane and high-strength steel cords (or aramid cords). The cast PU timing belt is an exact replica of its mold. Consequently, high pitch accuracy along the entire length of the belt is realized. They are particularly well suited for smooth running and high speeds. By combining high-quality materials and this modern production method, the resulting timing belts exhibit supreme mechanical, chemical and physical properties. Mechanical properties: Low longitudinal tolerance Longitudinal stability, negligible elongation Form-fit, synchronous running Low noise High abrasion resistance Favorable performance-weight ratio Chemical properties: Good ageing resistance Operating temperature range from -30°C to +80°C Resistant to simple oils, greases and gasoline Applications All types of drives Office machines Textile machines Wood-processing machines

Their slip resistance makes belt bands especially suitable for small-scale and bulky products such as bags.

KEIPER has an extensive range of flat belts, including high-performance flat belts, power transmission belts, folder-gluer belts, machine belts, tangential belts and conveying belts. For the perfect power transmission, conveying or control solution in any industrial sector. Keiper flat belts are designed to meet your specific requirements and applications, and, accordingly, they are made to size. Our flat belts are made of different traction layers and composite structures with different coatings such as nitrile-butadiene rubber, leather and surface structures. FLEXA With a polyamide or polyester reinforcement With a one-sided or two-sided coating of nitrile-butadiene rubber, highly resistant to abrasion and wear Different surface structures CROMA With a polyamide reinforcement With a one-sided or two-sided coating of chrome-split leather, highly resistant to abrasion and wear Butt leather belts Made of pure prestretched butt leather Rubber-and-fabric belts

Neoprene endless molded timing belts (form belts)  L / H / XH / XXH

PVC conveyor belt 2-ply petrol, structure grip

We have a complete range of polyurethane round belts for conveying and power transmission applications. PU round belts, extruded in open lengths, are homogeneous round profiles that can be welded for use as high-quality power transmission and conveying elements. Our stock mainly comprises solid profiles with a smooth or slightly roughened surface and hollow profiles for nipple connections. Several types have FDA/USDA approval and comply with EU Directive 2007/19/EC. Although we generally produce in open lengths, we can also produce all belts according to your specifications. Our round belts convey a wide range of products such as foodstuffs, glass, roof tiles, PC boards and many more. The standard range of round belts is rounded off with aramid, polyester or glass-fiber reinforcements. If an appropriate quantity is purchased, we also produce special types with PES or aramid reinforcements.

Overview to the technical datas of KEIPER conveyor belt product range UNITRANS

Neoprene endless molded timing belts (form belts)  STD S8M / S14M / DS8M

PVC conveyor belt 2-ply white, structure Supergrip

PVC conveyor belt 2-ply petrol