Produktai skirti diržas (300)

Keiper PU Flex timing belts are extruded of abrasion-resistant polyurethane and high-strength steel cords, aramid cords or high flexible steel cords and VA steel with endless winded cords. In these belts the cords are helically spooled. These timing belts can be used for all kinds of power transmission applications because of their high power transfer, and their high flexibility make them suitable for synchronous transport and positioning applications. By using standard polyurethane and such other belt materials as polyurethane that is cold resistant, heat resistant or suitable for contact with foodstuffs a wide spectrum of applications is possible.

PVC conveyor belt 2-ply black, structure Supergrip

Hollow core belts for nipple connections when quick and easy installation is needed. Standard stock program: 75° Sh.A red, smooth 80° Sh.A sky-blue, smooth, FDA 85° Sh.A green, smooth Available diameters: 4.8mm - 15mm Available lengths: starting from 110mm Available hardness: 75° Sh.A – 85° Sh.D Temperature resistance: -30°C - +70°C Coefficient of friction: 0.3µ - 0.7µ

Neoprene timing belts with silicone coating

PVC conveyor belt 2-ply petrol, structure Längsrille

PVC conveyor belt 1-ply white

PVC conveyor belt 2-ply green

Round belt catalog

Keiper CROMA high-performance flat belts are made of fully synthetic polyamide foils, with a one-sided or two-sided adhesion coating of chrome-split leather. Fitted with a polyamide reinforcement. With a one-sided or two-sided coating of chrome-split leather, highly resistant to abrasion and wear. Chrome-split leather is used exclusively as a friction coating on power transmission belts as an alternative to nitrile-butadiene rubber (NBR). CROMA belts with a coating of chrome-split leather are perfect for power transmission applications where the rollers are considerably contaminated by oil and dirt. In view of its slightly porous surface, chrome-split leather is air and humidity permeable and absorbs moisture; thus, it retains friction. However, the coefficient of friction of leather is lower than that for nitrile-butadiene rubber and steadily decreases during operation.

Keiper profiles and cleats Many special, innovative tasks required in the material flow, such as pacing, separating or positioning, can be realized by adding profiles/cleats and entraining elements to the belts. Profiles and entraining elements are made of the same high-quality polyurethane as our timing belts, are mechanically processed as sheets or injection molded. They are available in different blends and degrees of hardness, with glass-fiber reinforcement and in a matching color. The profiles and entraining elements are homogeneously fastened to the belt by welding or glueing. In view of our production methods, the cleats can be formed into any shape.

Silicone conveyor belt 2-ply white

Weltweit bekannt und auf der ganzen Welt im Einsatz! Die HUMMEL® ist leistungsstark, effizient und zuverlässig. Sie überzeugt durch eine optimale Staubabsaugung für nahezu staubfreies Arbeiten. Ausgereifte, langlebige Technik für perfekte Schleifqualität und enorme Arbeitsleistung macht die HUMMEL® zur unangefochtenen Nummer Eins in der Bearbeitung von Holzfußböden. Seit über einem halben Jahrhundert überzeugt sie Handwerker auf der ganzen Welt. Sie ist leistungsstark und gleichzeitig bediener- und wartungsfreundlich. Sowohl der Schleifbandwechsel als auch das Demontieren der Maschine sind denkbar einfach. Seit dem Jahr 2020 ist die HUMMEL® wahlweise mit oder ohne LED-Arbeitsleuchte erhältlich. Anwendungen mit der HUMMEL®: Die Bandschleifmaschine HUMMEL® wird überwiegend zum Schleifen von Holzfußböden verwendet. Sie ermöglicht das perfekte und wirtschaftliche Schleifen sowohl kleiner als auch großer Flächen. Einphasen-Wechselstrom-Motor:230 V / 2,2 kW notwendige Absicherung Stromnetz:mindestens 16 A Schleifwalzenbreite:200 mm Schleifwalzendrehzahl:ca. 2400 1/min Schleifbandabmessung:200 x 750 mm Maschinengewicht:79 kg

In our catalog for coatings, machining and profiles for belts, you will find all the different possible materials for coatings of belts. The possibilities for machining and amny examples for transportation cleats and profiles.

PVC conveyor belt 3-ply petrol

PU conveyor belt 2-ply green

PVC conveyor belt 2-ply fabric

KEIPER timing belt clamping plates can be made of many different materials, e.g. aluminum, steel or stainless steel. Keiper can produce them in all pitches and designed according to your specifications and drawings. This means that you will receive the optimal solution for the intended application and load. Our timing belt clamping plates work together optimally with our extensive and complete range of timing belts: in other words, a perfectly matched system for your requirements. We also have a large number of standard aluminum clamping plates on stock, which can be reworked according to your specifications (e.g. bores and mechanical processing based on drawings). Furthermore, such special surface coatings as hard coating, anodizing, zinc coating or bronzing improve the corrosion and wear resistance.

PVC conveyor belt 2-ply petrol

PVC conveyor belt 2-ply white, structure Fishbone

PU conveyor belt 1-ply light blue

PU timing belt HTD/ STD Pitch HTD5 / HTD8 / HTD14 / STD5 /STD8

Keiper haul-off timing belts are made with polyurethane or neoprene timing belts that are finished with many different kinds of coatings. They are used for conveying foils in bag forming, filling and sealing machines as well as numerous other conveying tasks. The extensive range of designs offers the optimal solution for any transport task and application, e.g. with smooth or vacuum-processed surface, finished according to individual specifications, and with many different coatings. Timing belts - Polyurethane molded timing belts - or neoprene molded timing belts Tension cords - Steel - Aramid - Polyester Coatings - PU yellow - Linatex - Various elastomers - Silicone

Neoprene endless molded timing belts (form belts)  STD S3M / S5M / S8M

PVC conveyor belt 2-ply black

Keiper open-ended PU timing belts are made of abrasion-resistant polyurethane and high-strength steel cords or aramid cords and are available in open lengths. These timing belts are very suitable for synchronous conveying and positioning applications because they have very high flexibility and can be made with many different tooth shapes and materials; when combined with different tension cords, innumerable applications are possible. Keiper open-ended PU timing belts can be produced endless welded and by the meter in almost all lengths and widths. Based on this combination of high-quality materials and production methods, these belts exhibit outstanding mechanical, chemical and physical properties. Endless welded timing belts are available in any length. Welded PU timing belts primarily are used in conveying technology.

V-belts / Power belts / Ribbed belts Catalog

PU timing belts with easy joint as strong as a welded joint The easy joint timing belt fastener is the perfect solution, for a quick and easy mechanical endless connection of PU timing belts. Assemble without disassembling, without stopping your production line Replace your belts in few minutes without disassemble your hoods, pulleys, axis. Reduce your production downtimes. The method of mechanical assembly and fastening system easy joint offers unique solutions for easy and fast repairs of power transmission belts or conveyor belts. Pitches: H / T10 / AT10 / T20 / AT20 / 8M / 14M Standard: Polyurethane 90° Shore A grey Versions: Standard, PAZ, PAR Cords: reinforced with a Polymercord around the Pin in each tooth joint, arranged in parallel Width: from 10 to 150mm, (wide belts possible on request)

Neoprene endless molded timing belts (form belts)  HTD 3M

PU conveyor belt 1-ply white

VFFS haul-off timing belts catalog