Produktai skirti vartojo (150)

ME1510 represents a compelling solution for structural applications requiring high mechanical properties. This multiend roving product increases physical properties – enabling vehicle light weighting, increased fuel efficiency and lower CO2 emissions. EXCELLENT PROCESSABILITY Due to excellent wettability in epoxy and phenolic matrices, very high glass content is achievable, enabling excellent processability while compounding. OUTSTANDING MECHANICAL PROPERTIES Superior strength and flexural modulus enable light weighting in vehicles to increase fuel efficiency, lower CO2 emissions and increase range in electric vehicles. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. FIRE RESISTANT Compatible with phenolic resins used in fire resistance applications such as electric vehicles. HEIGHT (MM):254 NOMINAL WEIGHT (KG):20.5 LINEAR WEIGHT OF ROVING:2400 and 4800 TEX 207 and 103 Yeild LOSS ON IGNITION (%) ISO 1887: 1995:0.7 MOISTURE CONTENT (%) ISO 3344: 1997:≤ 0.10

Owens Corning® Milled Fibers are designed to enhance mechanical properties, increase stiffness, improve dimensional stability, and minimize distortion under elevated temperatures. EXCELLENT DISPERSION & IMPREGNATION Predispersed nature promotes excellent dispersion in the matrix. Shortfiber thermoplastic compounds will show improved melt flow characteristics with shorter input fiber lengths. IMPRESSIVE AESTHETICS Fiber length and excellent distribution qualities provide a homogeneous, highly pigmentable surface with limited fiber prints and good color. ENHANCED PART STRENGTH Glass reinforced parts exhibit improved mechanical properties, modulus and dimensional stability. Powder Relatively freeflowing with a high bulk density for use in formulations requiring very uniform dispersion and short fibers with median fiber lengths typically in the range of 40 110 microns.

U801/U809 continuous filament mats represent specific solutions to homogeneously reinforce expanded polyurethane foam. CUSTOMIZED FOR P U FOAM PROCESS U801/U809 specific design helps to even mat expansion during the PU foaming process. U809 is compatible with CO2 blowing agent used in insulating material manufacturing process. Excellent glass/polyurethane bonding brings improved mechanical performance and dimensional stability to the PU foam. U801 superior drapability fits the most complex mold shapes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U801/U809 mats are compatible with polyurethane resin systems and designed for PU foam reinforcement process. U809 is suited for LNG (Liquified Natural Gas) carrier cryogenic insulating systems. U801 is recommended for PU foam reinforcement in replacement of wood structure, in housing and recreational vehicle applications. NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 - 600 - 900 NOMINAL MAT WEIGHT (OZ./SQ.FT):0.75 - 1.0 - 1.5 - 2.0 - 3.0 ROLL WIDTH (CM):127 - 128

SE8400 Type 30™ singleend roving is specifically designed for pultrusion processing in applications requiring high electrical resistance. Produced with Advantex®, corrosionresistant ECR glass technology by Owens Corning. Compatible with polyester, vinyl ester and epoxy resins. EFFICIENT PROCESSING Better wetout in polyester, vinyl ester, and epoxy resin, offering fast processing and good glasstoresin bonding, resulting in optimized part production. Good wetout and resin bonding results in excellent visual appearance of parts produced. GOOD MECHANICAL PROPERTIES Low seed glass results in excellent dielectric properties which are ideal for applications requiring high electrical resistance. ADVANCED SERVICE LIFE Advantex® corrosion resistant glass fiber combined with low seed glass is ideal for longterm electrical, physical, and acid resistance, reducing the potential for costly brittle fracture failures in the field. STRAND TENSILES: ASTM D 2343:Tensile Strength, psi (Mpa) AVG. E-701 POLYESTER RESIN:353,900 (2440) % GLASS :58.8 AVG. DER 331 EPOXY RESIN:338,800 (2336) % GLASS:54.5 TEX:4400 YIELD:113 MANUFACTURING REGION:North America

Manual stapler, extremely compact and light, suitable for stitching cardboard boxes. Body with a special aluminum alloy and depth/dot shape adjustment. Each model can use two measures of 15 and 19 mm points by simply turning the adjusting device. Staples width:35 mm Charger capacity:100 staples Usable staples:35/15-35/19 mm Weight:Kg. 1,200

MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside. Example model:140 Twist Cable Working:pneumatic Air consumption:50 Lt. / min Air pressure:6 bar Machine cycles:30 pcs. / min. Autonomy:About 5000 sealings Type of seal:Twisted lace Reels lenght:600-800 mt.

158B Roving is specifically designed for use in filament winding applications using epoxy resin, where high strength is required. 158B is suitable to reinforce phenolic resins. Fast wetout properties and high burst strength maximize customers’ processing and minimize costs.EXCELLENT PROCESSING Smooth runout combined with low fuzz properties, result in smoother parts and less downtime for cleanup, enabling higher efficiencies and lower manufacturing costs. FAST WETOUT Allows the processor to optimize part production speed resulting in increased productivity and reduced costs. HIGH BURST STRENGTH Excellent glass/resin bonding, which provides high burst strength in pipe or vessels. CORROSION RESISTANT Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion.

APRILIA 125/150 Leonardo/ST CODICE ORIGINALE:AP8102582 SKU:G 636

9703 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is designed for improved line speeds and product strength in the manufacturing of wetprocess glass veils. Provides strength and durability for construction, home furnishings and asphalt roofing shingles. EXCELLENT TENSILE STRENGTH Desirable veil and wet web strength for demanding construction and enduse products for home furnishings. EFFICIENT PROCESSING Designed to improve wet web strength in nonwovens processing, allowing improved line speed and reduced veil defects. IMPRESSIVE MECHANICAL PROPERTIES Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass, contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass.

LifeMat® wet laid glass nonwoven solutions help manufacturers improve the performance and lifespan of batteries. Pasting Mat is for use in flooded leadacid batteries for stopstart engines. Retainer Mat is for heavy duty and deep cycle batteries. DESIGNED FOR LEADACID BATTERIES (PASTING MAT) Excellent corrosion resistance with very low electrical resistance (<17mΩ/mm2). Minimal effect on cold cranking due to the low electrical resistance. EXCEPTIONAL PERFORMANCE (PASTING MAT) Reenforces the positive active mass at the surface while preventing positive active mass shedding. Exceptional oxidation resistance provides additional protection throughout the lifetime of the battery. EASE OF USE (PASTING MAT) LifeMat® is pasted onto/into the positive active mass where upon drying/curing a very strong bond is formed eliminating the need for pasting paper. Easy to cut and compatible with continuous pasting processes. Easily applicable in continuous pasting process. THICKNESS (MM):< 0.2 mm TENSILE:> 50N/50 mm ELECTRICAL RESISTANCE:<17mΩ/mm2 ROLL WIDTH:43 mm+ ROLL DIAMETER:75 mm Core ID PRODUCT THICKNESS (MM):0.2 - 1.2 NOMINAL ROLL WIDTH (MM) :43 - 2100 CORE ID (IN):3 or 6 PACKAGING FORM:Typically loose or on pallets, with leaves available on request.

UNICONFORM® mat is well suited for very complex forms requiring high deformation in closed molding process, and enables excellent translucency in panel applications. CHALLENGING APPLICATIONS Good drapability and highstretching provide ease of conformability and deformability to complex contours, while easy splicing and overlapping enable large and complex part design. IMPROVED SURFACE AESTHETICS The open mat structure enables a consistent resin distribution throughout the surface, providing a smooth appearance behind the gelcoat. Excellent panel clarity and translucency is provided by the use of glass material — no synthetic core or stitching. IMPROVED PERFORMANCES Continuous fibers provide high tensile and flexural performance to the final part. Lack of chemical binder provides improved smoke and fire resistance properties. NOMINAL MAT WEIGHT (G/CM2):450 - 600 - 750 - 900 - 1200 -1800 - 2400 OZ./SQ.FT:1.5 - 2.0 - 2.5 - 3.0 - 4.0 - 6.0 - 8.0

SE4850 singleend Type 30™ roving represents a compelling solution for Polypropylene in Direct Long Fiber Thermoplastics (DLFT) applications where improved performance and manufacturing economics is required. Improved resistance to fuzz generation for easier processing and improved housekeeping. Reduced strand stiffness for easier splaying. Increased lubricity for lower strand tension. Improved splice tensile strength for enhanced packagetopackage transfer and improved line efficiencies. Outstanding compatibility with PP for better wetout and dispersion. Optimized adhesion to PP to meet or exceed all mechanical performance needs. Rovings are available in a singleend internalpull package. Each pallet weighs about 1 ton and can be packaged in bulk or CreelPak™ packaging format. Pallets are stretch wrapped for load stability and for protection during transport.

PNEUMATIC SEALER SM 35/40A - WITH DATE PUNCHER Pneumatic sealer SM 35/40 A for closing bags in any material using an aluminum plate with a height of 5/7 mm. All parts in contact are made of AISI 304 stainless steel suitable for contact with food. The seal is obtained from a coil with high autonomy, cut to a length of 35/40 mm, wrapped around the neck of the bag and finally pressed to form a flat closure. Machine complete with date and a kit of numerical punches, practical, economical and safe. Example model:SM 35 A - 5 mm Machine power supply:Pneumatic Air consumption:50 liters/minute Operating pressure:6 bar Maximum closing speed:30 pz./min Aluminum seal dimensions:Width 5 mm Thickness 0,6 mm Lenght 35 mm

UNIFILO® 700 Series continuous filament mats represent a large choice of tailored preforming solutions for closed mold process. EASY PROCESSING S744, S750 products enable extra stretch and good resin flow for deeper draw applications. U746 product provides good stretch and excellent resin flow required in multilayer applications. ENHANCED MECHANICAL PROPERTIES T750, T754 products provide enhanced mechanical properties in the crossmat direction. U720 product provides stronger and more durable preforms. It is well suited for automated processes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U700 products are available with varying filament layout and binder contents to match up with specific customer applications. NOMINAL MAT WEIGHT (G/CM2):300 - 450 - 600 NOMINAL MAT WEIGHT (OZ./SQ.FT.):1.0 - 1.5 - 2.0 ROLL WIDTH (CM):50 to 306 ROLL WIDTH (CM):19.7 to 120.5

Windstrand® 3000A combines high weaving efficiencies and increased tensile Modulus at 0° for lighter blades and reliable performance. Blades utilizing Windstrand® 3000A are capable of operating in extreme environments due to its optimized design. LIGHTER BLADES 36% blade weight reduction HIGH WEAVING EFFICIENCY High weaving efficiency for stronger blades HIGH PERFORMANCE 0° fiber Modulus greater than 88 GPa Enhanced 90 ̊ properties Operation at increased Fiber Volume Fraction (FVF) levels Rovings are available in a singleend internalpull package. Each pallet weighs approximately 1 ton. Pallets are stretchwrapped for load stability. All doffs are wrapped with TackPakTM for protection and to aid package runout and transfer. Full doffs are approximately 19 kg (40 lb.) and they can be packaged in bulk or CreelPak® format.

Manual stapler particularly robust, suitable for the top closure of cardboard boxes. Available in 3 models for staples with width mm. 35 and depth mm. 15-19-22 and is provided with a device for adjusting the depth of stitching. Charger capacity:100 staples Usable staples:35/15 - 35/19 – 35/22 (to be specified at time of order) Weight:Kg. 2,5

Automatic banding FP TZ 888 simple and inexpensive, using paper and polypropylene tapes 30 mm. width. Maximum useful sizes mm. 240x140 h. (lenght unlimited). Speed up to 25 cycles per minute. The tape's tension is adjustable by knob. Manual or automatic operation. The banding FP TZ 888 in addition to the classic use in graphic arts, binders, paper industries, is particularly suitable for the realization of multi-packs or for the matching of multiple products in sales promotions. Useful dimensions:- Width from 40 to 240 mm. - Height from 5 to 140 mm - Lenght from 50 mm. to unlimited Max speed:25 cycles/min. Tape width:mm 30 Electric Supply:220V - 50 Hz - 150W

SE4818 Low Odor is specifically designed for excellent processing and handling for LFT (long fiber reinforced thermoplastic) & CFRT (continuous fiber reinforced thermoplastics) PP applications where low odor is required. LOW ODOR VERIFIED SE4818 Low Odor has been proven to meet low odor requirements per OEM test standards for automotive interior composite parts. Test methods include VDA270 German Association of the Automotive Industry, PV3900 Volkswagen SAE standards and testing and the Geely Low Odor test method Q/JLY J1770528D. EXCELLENT PROCESSING No catenary and low fuzz promotes superior processing, enabling higher efficiencies and lower manufacturing costs with less downtime for cleanup. SUPERIOR COMPOSITE STRENGTH Compared to other reinforcements on the market, SE4818 Low Odor offers superior composite tensile , flexural and Impact performance. Providing maximum part strength and long part service life. TEX:2400 FILAMENT DIAMETER (Μ):17 LOSS ON IGNITION (%):0.35 MOISTURE (% MAX):<0.05 MANUFACTURING REGION:Asia Pacific

ME1960 multiend roving represents a versatile solution for a largesurface of SMC (Sheet Molding Compound) components that require a combination of efficient processing, high mechanical, and aesthetic properties. EFFICIENT PROCESSING Easy unwinding and chopping, flat laydown, and uniform dispersion with low fuzz and static for large and/or semistructural part molding. ENHANCED PERFORMANCE Better wetout allows higher glass loading (up to 65% according to a 2016 single customer data source) due to excellent wetthrough and impregnation. This can be leveraged to further enhance the mechanical strength and stiffness of the composite part in complex structures. IDEAL COLOR (WHITE) FOR PIGMENTED PARTS Desirable product flow within mold at low shrinkage delivers a resinrich whitecolor surface aspect with lowporosity which facilitates good pigmentation or painting of finished parts. MANUFACTURING REGION:Europe PRODUCT/DOFF DESCRIPTION:ME1960 2400 Tex EXTERNAL Ø (IN):290 HEIGHT (IN) :260 NET WEIGHT (LB):20

PulStrand® PRO41 Roving is designed to maximize pultrusion processes by reducing the number of glass doffs needed. High tex reduces floor space, improves downtime and labor, and provides the opportunity to make larger parts without compromising mechanical properties/processing. 5075% less floor space required to run your product line. Product change overs require fewer doffs and less labor. Space savings and large tex enables you to make larger parts with the same setup. EFFICIENT PROCESSING Smooth runout combined with low fuzz properties, results in smoother parts and less downtime for cleanup, enabling higher efficiencies and lower manufacturing costs. IMPRESSIVE MECHANICAL PROPERTIES Desirable shear and flexural properties in major resin systems, provide maximum part strength and long part service life.

VL9202 is composed of chopped filaments of Advantex® glass fiber, 16 microns in diameter, that are bonded together with a styrene insoluble binder system designed for pultrusion processes. Corrosion resistance, longterm durability with Advantex® ECR glass. Easy resin wetout. Highquality, uniform surface layer. Enhanced part structural strength. High flexibility for complex die processing.

SE4805 singleend Type 30™ roving is specifically designed as a compelling solution for Compounders seeking increased productivity through improved processing and handling characteristics, and excellent compatibility in Polypropylene LFT applications. IMPROVED MANUFACTURING ECONOMICS Dependable internal and external unwinding process for less downtime. Reduction in fuzz generation relative to competitive reinforcements for easier processing and less downtime for cleanup. MULTIPROCESS COMPATIBLE Suitable for LFTG, DLFT and CFRT processes, pellet manufacturing and choppable to desired length. MECHANICAL PERFORMANCE Optimal adhesion to the Polyolefin resin matrix provides excellent dryasmolded mechanical properties. EXCELLENT IMPREGNATION & DISPERSION All processes show excellent dispersion within the final parts. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. PACKAGE HEIGHT (CM):<28.0 PACKAGE OUTSIDE DIAMETER (CM):<30.0

M715 chopped strand mat represents a compelling solution in contact molding applications where quick wetting, rapid air release, good conformability and low resin consumption are desired. EASY HANDLING & MOLDABILITY Maximizes molding productivity by reducing the labor required to roll out product. Ease of handling and ability to conform rapidly to complex molds. HIGH PERFORMANCE Optimizes resin consumption resulting in higher glass content and improved mechanical properties. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M715 is available in Mexico and Latin America. Additional weights and widths are available upon request by contacting your Owens Corning representative. NOMINAL MAT WEIGHT (G/M2):225 - 300 - 450 - 600 - 900 ROLL WIDTH (CM):96.5 - 127 - 132 NOMINAL MAT WIDTH (CM):96.5 - 127 - 132 ROLL DIAMETER (CM):28 ROLLS PER PALLET:16 PALLET SIZE (CM):114 X 114

Professional manual tackers Rocama 10/20 with body made of aluminum alloy. Loading dock below. Ideal for fixing labels on packaging and protective materials in wood, for assembly of frames and frames for decoration work, to set wallpaper, baseboards and wood profiles, for exhibitions stands, furniture stores, interiors of homes, caravans, campers and coatings of sofas and furniture. Equipped with power regulator. Available in two models: Rocama 10 for staples series AP with length of 5-8-10 mm, with total width 10 mm, section 0,45x0,90 mm. Rocama 20 for staples series AP with length of 10-12-14-16-20 mm, with total width 10 mm, section 0,45x0,90 mm, brads series FAST M of 20 mm and pin series FAST W of 20 mm, section 1,00x1,25. Example model:Rocama 20 Charger capacity:100 staples Staples lenght:from 10 to 20 mm Staples:AP 110-112-114-116-120 Pins:FAST M 20 with head – FAST W 20 without head

TruPave™ engineered paving mat from Owens Corning® provides high modulus tensile strength while creating a moistureresistant barrier to reduce the effects of reflective cracking and dramatically increase the life of the pavement. IMPRESSIVE PERFORMANCE Prevents reflective cracking and protects the pavement structure longer with low elongation, highmodulus glass fibers. Resists moisture damage by combining with asphalt to form a lowpermeability moisture barrier. High tensile strength improves flexural pavement performance under loading. Remains stable under hightemperature hotmix designs and will not shrink or melt – glass and polyester fibers are dimensionally stable up to 495°F. REDUCES COSTS Preserves pavement surface and protects structure longer for less maintenance and lower costs. Extends performance of pavement rehab investment by up to 500 percent.

SE4849 singleend Type 30™ roving represents a compelling solution for Compounders seeking improved productivity through increased line speed, and the potential for higher glass loadings made possible with excellent dispersion. IMPROVED MANUFACTURING ECONOMICS Greater than 50% reduction in fuzz generation relative to competitive reinforcements for easier processing and less downtime for cleanup. SUPERIOR COMPOSITE STRENGTH Increased splice tensile strength improves package to package transfer efficiency. Increased lubricity imparts lower strand tension enabling up to a 40% increase in compounding line speed for reduced manufacturing costs. SUPERIOR GLASS DISPERSION AND INCREASED PART STRENGTH Outstanding compatibility with Polyolefins, enabling better wetout, uniform glass dispersion and potentially higher glass loading. Optimized adhesion to the polymer matrix offering excellent mechanical properties to meet stringent enduse requirements.

366 Type 30® Single End Roving is specifically designed for fast wetout, good processing, high glass loading and excellent laminate properties, to maximize customers’ processing efficiency and minimize their production costs in pultrusion and filament winding applications. EXCELLENT PROCESSING Owens Corning T30 does not have catenary, enabling smooth runout, while low fuzz properties result in smoother parts and less downtime for cleanup; enabling higher efficiencies and lower manufacturing costs. OUTSTANDING MECHANICAL PROPERTIES Excellent shear and flexural properties in major resin systems, provide maximum part strength and long part service life. EXCELLENT STRAND WETOUT WITH REDUCED COST Fast, uniform strand wetout leads to higher glass loading with reduced resin, in all major resin systems. Resulting in optimized part production speed and increased productivity, reducing manufacturing costs. REGION:N. America YIELD:450 - 330 - 250 - 113 TEX:1100 - 1500 - 2000 - 4400

SE4121 singleend Type 30™ roving represents a compelling solution for Polypropylene Long Fiber Thermoplastics (LFTG and DLFT) applications where excellent mechanical properties and hydrolysis resistance are required. COMPOUNDING LINE EFFICIENCY No catenary and high resistance to fuzz generation equate to low cleanup & high machine efficiencies. MULTIPROCESS COMPATIBLE Suitable for all DLFT and LFTG processes and choppable to desired length. MECHANICAL PERFORMANCE Optimal adhesion to the Polyolefin resin matrix provides excellent dryasmolded mechanical properties and hydrolysis resistance. EXCELLENT IMPREGNATION & DISPERSION Both DLFT and LFTG processes show excellent dispersion within the final parts. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, extends service life compared to standard Eglass. PELLET (12MM):PP resin + Glass content 50% TENSILE STRENGTH (MPA):189 FLEXURAL STRENGTH (MPA):282 FLEXURAL MODULOUS (MPA):11447

SE1200 singleend Type 30™ roving is a compelling solution designed specifically for knitting and weaving with versatility to work well in filament winding, pultrusion, and LFTP applications. EXCELLENT PROCESSING Smooth runout from lower drag across contact points produces less fuzz, resulting in smoother parts, less cleanup, and improved machine efficiencies. MULTIPROCESS & MULTIRESIN COMPATIBLE Flexibility for use with standard weaving looms, multiaxial knitting machines, filament winding, and pultrusion. FAST WETOUT WITH REDUCED COST Fast, uniform strand wetout leads to higher glass loading and good adhesion, resulting in optimized part production speed which supports increased productivity and betterquality finished parts. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass provides longer service life in applications facing corrosion and possesses high fatigue properties to help qualify for wind energy.

LIGHTER. STRONGER. SMARTER REINFORCEMENT. Concrete cracks, water seeps in and corrosion of internal reinforcing steel causes concrete structure failure. Owens Corning® MATEENBAR™ Fiberglas™ Rebar is a proven, successful alternative reinforcement that provides longer service life in a wide variety of applications. Bridge Construction Marine Structures Tunnel Boring / Soft Eye Rail Electrical Isolation Historical Preservation Architectural Balconies