Produktai skirti duja (224)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-US has a vacuum manometer. In the PS 403-US model, the control buttons are replaced by toggle switches. With flow measurement. The test gas is conditioned (humidified)

The GMS 4000 offers even higher accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow as well. In addition to reliable measurement results, optimal stability and constant response times are also achieved. The easiest maintenance and maximum accessability because the intelligent measuring sensors can be quickly replaced without configuration problems, if necessary. Thanks to the menu navigation in connection with the automatic measuring range selection, the measuring system GMS 4000 is easy and safe to use even by an inexperienced user. All that is required for commissioning is the selection of a task from the main menu, e.g. gas detection. From there the measuring device sets itself automatically according to a defined program, sensor selection, measuring range, pump output and alarm message. Display:Illuminated LCD Display Pump:Diaphragm pump, flow rate adjustable and monitored Sensors:Semiconductor sensor, Infrared CH4 and / or CO2, Electrochemical sensors Sensitivity:1 ppm Measurement Range:1ppm - 2.2 vol.%, 100% LEL, 0-100 vol.% CO2 + CH4, 0 to 500ppm CO Gas Types:Natural gas, carbon dioxide, carbon monoxide, oxygen, hydrogen sulphide Protection Class:IP 54 Energy Supply:Li Ion Operating Time:More than 14 hours Dimensions:215 x 60 x 100 mm Weight:1.5 kg Pieces:GM 4000, Carrying Case, Telescopic Probe, User's Manual, 230V Charger, Filter

For insulated glass production, reliable quality control is indispensable. Consequently, reliable test methods are even more important. With HELANTEC devices, you get the technology to check the quality of your products. All devices are easy to use and very accurate. The GLASS METER is used for checking the thickness and distance of the glass panes, as well as the coatings. Features reliable measurement (glass thickness / air distance / LOWE coating) compact and handy design easy operability suitable for multicoated IG units suitable for tripleglazed units and all spacer materials nondestructive measurement We would be pleased to advise you in the selection of a suitable analyser for your requirements.

We offer you standardised complete systems for the measurement of volume & mass flows. We use measuring elements that have established themselves within previously built customer-specific test benches and convince with high measuring accuracy. We develop and manufacture Venturi tubes and nozzles as individual components or as VMF® complete systems. The VenturiMasterFlow® measuring system, VMF® for short, is used for the precise measurement of air or gas volume and mass flows of 100,000 m³/h. The core of the VMF® system is the FlowProcessor, a PC system with the corresponding data acquisition hardware. Venturi nozzles convince by a low remaining pressure loss and are suitable for flow measurement of gases with high temperatures. The software developed under LabVIEW is operated either via touch screen or with mouse and keyboard.

The AtmoSense™ is a flexible process analyzer designed to provide real-time measurements of process gas variables in a wide variety of atmosphere control applications. The AtmoSense™ is available with a range of sensors and options to provide accurate measurement of either dew point, relative humidity(%RH), methane(CH4), propane(C3H8), hydrogen(H2), carbon monoxide(CO), or carbon dioxide(CO2). Choose NEMA enclosure for permanent mount or pelican case with battery for portable use.

Stationäre Lösung zur Messung des Restölgehalts in Druckluft nach ISO 8573 Der Restöl-Sensor OILCHECK misst den dampfförmigen Restölgehalt in der Druckluft und hilft so dabei, Druckluftleitungen möglichst ölfrei zu halten. Mittels Probenahme wird ein repräsentativer Teilvolumenstrom aus der Druckluft entnommen und dem OILCHECK zugeführt. Durch die kontinuierliche Messung werden Grenzwertüberschreitungen sofort erkannt, Abstellmaßnahmen eingeleitet und somit eine dauerhafte ölfreie Druckluft ermöglicht. -OIL-Check 400 – Restölmessung des dampfförmigen Restölgehaltes von 0,001…2,5 mg/m³, 3…16 bar. Hochgenauer PID-Sensor, integrierter Mini-Katalysator zur Nullpunkt-Kalibrierung -Permanente, hochgenaue Restölmessung (Öldampf) mit PID-Sensor (Photo-Ionisations-Detektor) -Langzeitstabile Messergebnisse durch automatische Nullpunkt-Kalibrierung. Der integrierte Mini-Katalysator erzeugt zuverlässig ein definiertes Referenzgas zur Nullpunkt-Kalibrierung.

In powered mode, the field strength generated in the solenoid pulls the plunger against the spring tension out of the non-powered position. Solenoids for DC and AC voltage add considerably to the range of technical variants. As the solenoid encompasses the plunger guide tube and the plunger moves in this encapsulated structure, these solenoid valves are called plunger valves.

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Partikelzähler zur Überwachung der Druckluftqualitätsklasse 1 (ISO 8573)

Test station to review the gas detection devices. The control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 is possible. All gases can be connected to 1 liter aluminum compressed gas cans. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

We develop and manufacture Venturi tubes and nozzles as individual components or as complete VMF® systems. The VenturiMasterFlow® measuring system, VMF® for short, is used for the precise measurement of air or gas volume and mass flows 100,000 m³/h The flow measurement by means of a Venturi tube or Venturi nozzle is characterized by high measuring accuracies up to 0.5% MW and a fast response time < 10 ms. A further benefit is the high long-term stability of the measuring element. diameter:DN16...DN40

Specially developed for the diverse tasks on the construction site, the Schütz Messtechnik company offers tailor-made measuring tools that reliably and comprehensively support the craftsman in all of his work “all around gas”. The complete solution for the load, leak tightness and usability test on gas pipes can be carried out safely and quickly, including documentation. GDPR-compliant as all personal data is protected against unauthorized access by a PIN. The measurement result can be printed out at the test point on site (optional), fully automatically and without interrupting the system. The professional solution for all measurements according to TRGI The prescribed load tests, tightness tests and usability tests, in the interior installation are possible with just one measuring device With integrated pump for pressure generation Very short measuring time through reference leak measurement PC software included Display:color LCD, backlit Alarm:acoustically, optically measuring range:0,1mbar - 5 bar 0,1 - 10 bar Operating Temperature:-20° C to 40° C Protection class: IP 54 Power supply:battery, rechargeable battery, 4 x AA Operating Time:more than 12 hours of continuous use Housing:plastic with shock protection Interface:serial USB, Bluetooth, IR

mit TÜV+GS+UN-Zulassung, daher geeignet für gewerbliche Transporte nach Gefahrgutverordnung (GGVS: Strasse/Schiene/See) Größe: 10 Ltr. Maße in mm: H275/B169/T345 Gewicht: ca. 2,7kg netto Verpackung: 1 Stück im Karton Art. Nr.: EK10 mit TÜV+GS+UN-Zulassung, daher geeignet für gewerbliche Transporte nach Gefahrgutverordnung (GGVS: Strasse/Schiene/See), verwendbar für verschiedene Füllgüter (z.B. Kraftstoff, Chemiekalien, Lebensmittel), rostfreier Edelstahl, außen elektrolytisch poliert, mit massivem Edelstahl-Schraubverschluss Größe: 10 Ltr. Maße in mm: H275/B169/T345 Gewicht: ca. 2,7kg netto Artikelnummer: EK10

With the ISOAltimeter PROFESSIONAL the IG unit is prepared in production in such a manner that it is flat at the higher altitude or lower altitude of the installation site. Additional aftertreatment is not required! The ISOAltimeter PROFESSIONAL is the further development of our proven predecessor model. Intuitive operation via touch screen, clear user guidance and versatile functions are only a few of the features that characterise our pressure balance system.