Produktai skirti duja (224)

Bis 35 bar

TURBOFILL has been developed exclusively for 1hole gas fill technology whcich is dilution filling. A special triplex probe combines argon fill, air suction and pressure sensing. It guarrantees as much turbulences as possible to replace the air with argon. At the same time it removes the air so that the internal pressure stays at a very low level to prevent the IG unit from bending. As soon as the adjusted concentration is measured the machine stops automatically. Equipped with 4 stations TURBOFILL realises up to 2000 IG units per day1). As for all other products this type as manufactured with high quality product that assure longlasting proven gas analysis. Thus TURBOFILL delivers constant gas fill quality for every IG unit.

The RCV Plus™ Gas Mixing System is a combination of flow meters specifically designed to monitor and control the ratio of two gases. It consists of an RCV Plus™ and a FLO-TRONIC Plus™. The RCV Plus™ utilizes a micro-processor that continuously compares a preset ratio to the real-time ratio of the two gas flows, as measured by the FLO-TRONIC Plus™, and the ratio control valve itself. Using a stepper motor, the RCV Plus™ continuously adjusts the flow metering needle-valve to precisely maintain the preset gas ratio. The real-time ratio is continuously displayed on the LCD screen of the RCV Plus™. Included in the RCV Plus™ is an optional input for the addition of a trim gas, which is frequently used for process control. Trim gas addition is additive to the ratio. When trim gas is used, the continuously displayed real-time ratio then includes the trim gas addition.

The test bench is designed for calibration with critically operated nozzles of domestic gas meters or others such as diaphragm gas meters, ultrasonic meters, thermoelectric gas meters. The test bench is specially designed for the calibration of domestic gas meters (bellows gas meters, ultrasonic meters, thermoelectric gas meters). The test bench is modular - 1x6 to 4x6 clamping positions for the gas meters can be combined. Due to the modular design 1 to 12 gas meters can be tested simultaneously. In parallel, up to twelve additional test pieces can be adapted, run in and leak tested. A magazine consisting of three critical nozzles is used as flow transmitter. Optionally, a nozzle drum with nine combinable nozzles can be used. This allows the generation of up to 512 different flow points with highest accuracy.

The ExoFlex™ line of exothermic gas generators is designed to generate lean or rich exothermic gas. The generator includes automatic output turndown to 20% of the generator capacity with little loss of efficiency using the patented, maintenance-free ExoInjector™ gas mixing system. Thanks to a patented fuel injection technology that utilizes electronic flow measurement and precise ratio control, ExoFlex™ consistently provides the ideal mixture for high quality gas production. Another innovative design feature is the trim control input with programmable control range for precise generator control, which also eliminates the need for extra meters or valves. The ExoInjector™ easily replaces existing carburetor/pump designs for a significant reduction in process costs.

The SMART 150 is a small and handy gas filling system, equipped with the proven and high quality HELANTEC gas filling technology components. It enables a reliable filling process with easy operation. The capacity is configured for 150 units1) with one filling line. The SMART 150 gas filling system is suitable for occasional gas filling production of sample units smaller production facilities Gas concentration is measured continuously during the filling process by the integrated gas analyser. As soon as the set gas concentration is reached the filling process is ended automatically. Through the use of a pump, as well as the optimised filling speed, an extremely low gas consumption is realised. The SMART 150 can be used for all gases and gas mixtures that are standard in the insulated glass industry. The excellent priceperformance ratio will convince you.

The GM 5 from Schütz Messtechnik always offers the highest accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow and can then adapt to the changed measuring environment and set, monitor and adjust the volume flow. In addition to reliable measurement results, optimal stability and constant response times are achieved. The menu navigation in connection with the automatic measuring range selection makes the GM 5 easy and safe to use by any user at any time. All that is required for commissioning is the selection of a task in the main menu and the measuring device independently sets the sensor selection, measuring range, pump output and alarm message according to specified specifications. Measurement range:according to the task Sensors:Semiconductor gas sensor, Thermal tone, Thermal conductivity, Infrared CO2 Ex protection:KEMA 03ATEX2549, II G 2 EEX ib d IIB T3 Display:LCD graphic display, autom. Lighting Display digital and analog (bar graph) Weight:approx.1.8 kg Dimensions:215 x 60 x 100 mm

The FurnaceDoctor®-Pro provides accurate infrared measurement of CO, CO2, and CH4 and computes the % carbon, Dew-point and expected O2 probe millivolts. Used with both endothermic and exothermic atmospheres. BENEFITS • Accurate calculation of atmosphere carbon potential • Verification of oxygen probe accuracy • Easy identification of furnace atmosphere problemsand furnace condition • Evaluation of Endo and Exo generator performance, and catalyst condition • Optimize nitrogen methanol system performance • Easy retrieval of data logged gas analysis

Das tragbare Abgasmessgerät zur kontinuierlichen Abgasmessung und Berechnung der Abgaskomponenten und zur Verbrennungsoptimierung an Gas-/Ölfeuerungen, Gasfeuerstätten, Brennwertanlagen sowie Anlagen für feste Brennstoffe. Jetzt auch mit Bluetooth lieferbar!! Weitere Informationen finden Sie im Datenblatt

Zur Inbetriebnahme und Instandhaltung von Vergasern für Holz und Reststoffe sowie für Pyrolysegase. Gerät zur Messung von bis zu 5 Gasen im unterbrechungsfreien Dauerbetrieb bis zu 24 Stunden. Weitere Informationen finden Sie im Datenblatt

Test gas set for testing gas detection and gas measuring devices GPL and GPD. According to the DVGW rules, a weekly check with 1 vol% CH4 is necessary. With screw-on extraction adapter and display of the flow. Delivered with conditioning filter in a carrying case (not including GasPen).

Abgasmessgerät im 19“ Einschub, geeignet zur Langzeitmessung für Gas-, Öl- und sonstige Feuerungsanlagen der Industrie zur Verbrennungsoptimierung. Weitere Informationen finden Sie im Datenblatt

Abgasmessgerät Visit 01 LD

The rotary gas meters GM4 and GM16 meet the highest demands for reliable and precise reference measurement of smallest quantities up to 0.01 m³/h. They operate according to the direct displacement principle (RPD - rotary positive displacement), in which two counter-rotating pistons convey a fixed volume from the inlet to the outlet of the gas meter with each full revolution. Due to the specially shaped pistons, absolutely pulsation-free operation can be achieved (patent pending). They achieve an excellent measuring accuracy of 0.5 % MW + 0.005 % EW. Both versions are suitable for operation up to 6 bar overpressure. With continuous, absolutely pulsation-free and highly precise flow measurement, the reference gas meters from Ehrler Prüftechnik are the gold standard in the field of small volume measurement. Features: Reference measurement of small flow rates Continuous and absolutely pulsation-free Overpressure operation Excellent measurement accuracy Robust & compact design Qmin:0.01 m3/h Qmax:16 m3/h Measurement accuarcy:0.5 % MV + 0.005 % EV

The RAPIDE L200 is based on the HELANTEC fastfill technology and is the entrylevel model of the RAPIDE L series. The capacity with one filling line is approximately 300 units1). It is equipped with modern, progressive technology and enables efficient gas filling with reliable gas concentrations. This is measured continuously during the entire filling process via an integrated gas analyser. As soon as the set gas concentration is reached the filling process is ended automatically. Synchronisation of the filling and suction process also enables troublefree filling of large IG units. The handy device is well suited for changing implementation sites. The HELANTEC RAPIDE L200 also convinces with its extremely favourable priceperformance ratio. Are you looking for higher capacity and shorter cycle times? If so, consider our gas filling systems, RAPIDE L500 and RAPIDE L900.

Während der letzten Jahre haben wir bei EP-E eine Reihe von Primärstandards für Gase entworfen und eingeführt, die für den Einsatz in Kalibrierlaboratorien ausgerichtet sind. Während der letzten Jahre haben wir bei EP-E eine Reihe von Primärstandards entworfen und eingeführt, die für den Einsatz in Kalibrierlaboratorien ausgerichtet sind. Als Technologiepartner der Physikalisch-Technischen Bundesanstalt (PTB) in Braunschweig basieren unsere Lösungen auf höchstem Standard. Die EP Gas Glockenkolben erzeugen einen Volumenstrom, der auf die SI-Einheiten Länge und Zeit rückführbar ist. Die Kolben werden über eine Spindel von einem Schrittmotor angetrieben. Im Ausgangszustand ist ein Kolben voll ein- und der andere voll ausgefahren. Über den Kolbenquerschnitt und die Verfahrgeschwindigkeit kann der Volumenstrom hochpräzise eingestellt werden. Am Ende des Kalibriervorgangs befinden sich beide Kolben in entgegengesetzter Position zur Ausgangslage.

Visit 01 L/LR, Visit 07

Luft/Gasfühler

The GasPro gas detector can be equipped with sensors for up to five gases with ATEX approval. With the option of equipping the gas detector individually with various sensors, the GasPro gas detector is ideal for use in sewers, sewage treatment plants, landfills, ships, chemical and oil processing industries. An important unique novelty "positive safety" display. The GasPro signals the status at a glance via a three-color LED, green display = everything OK, yellow display = still OK, but a check is due soon, red display = not OK Particularly noteworthy is the loud alarm at 95 db and the optical signaling indicated by two LEDs that can be recognized from each side. The measured gas concentrations are saved every 10 seconds and stored in the internal memory. In addition, various events (switching on, alarm, calibration) are stored in the memory. The collected data can be transferred to a PC with a USB cable. A charging station with interface or a calibration station are also available. Display:Illuminated LCD display Sensors:Electrochemical sensors, Thermal tone, Infrared Protection Class:IECEx Ex ia d IIc T4 ATEX II 2G Ex ia d IIc T4 Gb Standards:EN60079-29, EN45544, EN61779, EN50270, EN50271, EN61779 Energy Supply:Li-ion batteries Operating Time:about 19 hours about 17 hours, with pump Weight:about 340g Dimensions:43 x 130 x 82 mm

With the GPL 3000 Ex you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 Ex is a professional leak detector for everyday work. Display:5x LEDs Measurement Range:0 ppm - 1 vol.% Gas:Methane, Propane or LPG Temp. Range:0 ° C to 40 ° C Alarm:Acoustic and optical Protection Class:IP 54 Battery:2 x alkali manganese (mignon) Operation time:at least 10 hours of continuous use Weight:approx.135g (without batteries) Dimensions:135 x 45 x 25 mm Gooseneck extension:180mm Ex Protection:II 2G Ex ib IIC T1 Gb applicable to Zone Ex 1

To better protect the sensor head of the GasPen from dirt, this protective cap can be put on the sensor head.

For checking the gas detection and gas measuring devices. All gases can be connected in 12 liter aluminum pressurized gas cans.

Car Support with Charging Cable for Gas Pens Complete with connection cable and charge monitoring and operating display

With the GPD 3000 Ex you can detect the smallest of leaks. The digital display enables the measured value to be recognized precisely and the analog display makes it easy to assess the trend. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The sensor in the GPD 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. o simple. Clear digital display of the measured values enables even inexperienced users to easily search for leaks. Together with the robust metal sensor head and the stable housing, the GPD 3000 Ex is a professional leak detector for everyday work. Display:Illuminated LCD display and analog bar display Measurement Range:0 ppm - 2,5 Vol.% / 0 ppm - 50% UEG (LEL) Gas :Calibrated to methane, propane or hydrogen Temp. Range:-10°C - +40°C Operational Temp::-20°C - + 70°C Protection Class:IP 54 Battery:2 x 1.5V Mignon Cells Camelion Plus AA Operation time:up to 12 hours (non-rechargeable) / up to 8 hours (rechargeable battery, 2200mAh) Weight:approx. 185g (without batteries) Dimensions:135 x 45 x 25 mm Gooseneck extension:180mm

The EndoInjector™ is a precise gas mixing / control system for endothermic gas generators. It incorporates a patented fuel injection design that utilizes electronic flow measurement and precise ratio control to consistently provide the ideal gas mixture for high quality endo gas generation. The fuel injection design automatically delivers gas mixture on demand, providing only as much endothermic gas as furnaces require to reduce operating costs and eliminate gas waste. EndoInjector™ typically pays for itself in less than 1 year. The ExoInjector™ is designed specifically for exothermic gas generators. While similar in concept, the ExoInjector™ differs from the EndoInjector™ in that it comes in modified mechanical versions to accommodate pre-mix or nozzle-mix burners with a custom HMI software that allows for predefined ratio set points for burner ignition, rich exo, and lean exothermic gas. The system can be modified to provide hydrogen content control and water vapor monitoring.

With the very simple operation and the generated and saved measurement protocol, the documentation can be created quickly and completely reproduced. It is possible to save the measurement data in the device and to print it out again later. No tracer gas nor a second measuring device are required for use. The internal battery, the 230V charger or the 12V vehicle voltage can be used for the energy supply. All included in a complete set. Ethane is always contained in natural gas; evidence of this gas is also evidence of natural gas. A lengthy gas analysis is normally required to prove beyond any doubt that the measured gas concentration is actually natural gas and not swamp gas. This, also due to the sampling, a difficult and time- consuming process, is completely eliminated. Measurement and sampling directly at the borehole is easily possible. The printout can take place after the measurement. Display:LCD display with 2 x 16 characters, illuminated Measurement range:100ppm to 100 Vol.% Sample gas in the borehole Gas:Hydrogen, methane, ethane and propane Detection Limit:< 10 ppm Ethane (according to DVGW regulations) Test Gas:50 ppm Ethane (according to DVGW regulations) Temp. Range:0°C to 40°C Protection Class:IP 54 Energy Supply:Battery (Lithium Ion Battery), 12V Kfz, 230V Operation time:more than 200 measurements with one battery Dimensions:158 x 63 x 229 mm Weight:approx. 1 kg

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

With the GPD 3000 you can detect the smallest of leaks. The digital display enables the measured value to be recognized precisely and the analog display makes it easy to assess the trend. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The sensor in the GPD 3000 is protected from dirt and mechanical stress by a metal protective cap. o simple o light o exact o rugged o 30 year guarantee o includes a free annual revision Clear digital display of the measured values enables even inexperienced users to easily search for leaks. Together with the robust metal sensor head and the stable housing, the GPD 3000 is a professional leak detector for everyday work. Display:Illuminated LCD display and analog bar display Measurement Range:0 ppm - 2,2 Vol.% / 0 ppm - ~ 50% UEG (LEL) Gas:Calibrated to methane, propane or hydrogen Temp. Range:-10°C - +40°C Operational Temp.:-20°C - + 70°C Protection Class:IP 54 Battery:2 x Alkali Mangan (Mignon) Operation time:up to 12 hours (non-rechargeable) / up to 8 hours (rechargeable battery, 2200mAh) Weight:approx. 185g (without batteries) Dimensions:135 x 45 x 25 mm Gooseneck extension:180mm

Test station for revising gas detection devices. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-U has a vacuum manometer. With flow measurement. The test gas is conditioned (humidified)

The Total-Meter™ is a fully calibrated electronic flow meter with a built-in flow totalizing function. The Total-Meter™ utilizes field-proven differential pressure flow measurement technology to accurately monitor industrial liquids or gases. The actual flow rate is displayed locally on the 4 digit LED display and is also retransmitted with a scalable 4-20mA output for remote monitoring. In addition, the Total-Meter™ tracks total volumetric consumption up to 999,999,999,999 engineering units and will communicate using the ModbusRTU protocol over RS-485/232. The Total-Meter™ is designed to be piped directly into a gas or liquid pipeline and requires minimal space. Integrated programmable flow alarm output can be configured to trigger either high or low flow alarm situations based on actual flow rates.