Produktai skirti domestics (535)

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 13mm - 50mm Thread sizes: 1/2" - 2" Material:brass or CUPHIN Dimensions:for PE pipes diameter 13 - 50mm Application:cold and hot water up to 95°C Application:Gas up to 4 bar Application:heating/ district heating Kind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

Original codes: FLT4 - 901497 – 690073210 Compatible brands: Bertazzoni - Smeg

Original codes: AFCFCA267LL Compatible brands: Airforce

Original codes: 6057930 Compatible brands: Miele

Nominal volume 360 L Nominal loading capacity 144 Kg + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 + resistant to UV, frost, heat and chemicals + emptied by stepped comb-lifting device (shape A), reinforced by additional ribs + equipped with two solid rubber maintenance-free 200 mm diameter wheels; also available with 300 mm diameter wheels + corrosion-protected steel axle, zinc-plated + with integrated chipnest in the frontal comb; accommodates transponders (RFID chips) compatible with the most widely used ID and weighing systems + available in standard colours of grey, green, blue and brown; additional colours available + strong ribs allow for high stacking + with raised edge to prevent water ingress (e.g. during rain) + meets the requirements of EC directive 2000/14 EC. In accordance with DIN EN 840:Manufactured from HDPE Resistant to UV, frost, heat and chemicals:In many different colours With integrated chipnest:Please visit our website for many options

The test bench is designed for calibration with critically operated nozzles of domestic gas meters or others such as diaphragm gas meters, ultrasonic meters, thermoelectric gas meters. The test bench is specially designed for the calibration of domestic gas meters (bellows gas meters, ultrasonic meters, thermoelectric gas meters). The test bench is modular - 1x6 to 4x6 clamping positions for the gas meters can be combined. Due to the modular design 1 to 12 gas meters can be tested simultaneously. In parallel, up to twelve additional test pieces can be adapted, run in and leak tested. A magazine consisting of three critical nozzles is used as flow transmitter. Optionally, a nozzle drum with nine combinable nozzles can be used. This allows the generation of up to 512 different flow points with highest accuracy.

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

Stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can therefore be used not only in residential buildings, but also in industrial, commercial and public buildings. They are used for the distribution of water and for isolating and balancing flow in heating and cooling circuits. This means that they can be used for the connection of radiators, ventilation / air conditioning units, as well as wall, ceiling and floor heating / cooling systems. Venting, flushing and flow balancing are particularly important to ensure trouble free and optimum operation in floor, wall and ceiling heating and cooling systems. The SANHA heating circuit distributors are equipped as standard with safety filling and ventilation device as well as integrated flow meters or control valves. This allows a reliable, fast and thus cost-efficient execution of these measures. Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

Original codes: 00362380 Compatible brands: Balay - Bosch - Neff - Siemens

Original codes: CF140 - 10032844 Compatible brands: Klarstein - PKM

Original codes: DKF11 - DKF11-P Compatible brands: Miele

Original codes: 00796390 - LZ52751 Compatible brands: Blaupunkt - Bosch - Constructa - Junker - Neff - Siemens - Viva

Original codes: 00361047 - LZ52050 Compatible brands: Bosch - Constructa - Junker - Neff - Siemens - Viva

Original codes: 17000822 - HEZ381700 - 17004574 - HZ381700 - LZ21JCB11 Compatible brands: Balay - Bosch - Constructa - Neff - Siemens

Original codes: 12005749 - 133.0335.682 Compatible brands: Balay - Bosch - Neff - Siemens - Viva

SANHA®-Heat Fastening set for wall heating modules for wooden walls Operating pressure:Max. 10 bar Operating temperature:16 °C - 60 °C

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865 Height:1,40m - 1,60m Material:Stainless steel

Original codes: 9188065384 - 9197059811 - 133.0176.352 Compatible brands: Beko - Faber - Roblin – IKEA

Original codes: 50288593002 - AFFCAF16CS - TYPE F16 – KFMK-6 – AMC981 Compatible brands: AEG - Airforce - Arthur Martin - Blaupunkt - Boretti - Electrolux - Htech - M-system - Whirlpool

Original codes: 50248271004 Compatible brands: AEG - Alno - Arthur Martin - Electrolux - Faber - Hotpoint-Ariston - Juno - Progress - Roblin - Zanker - Zanussi

Original codes: BAKS - BAKFS Compatible brands: Bora

Plug-in connector for drinking water, water and gas. The material-friendly connecting technique enables that the pipe is only stressed as the relations of pression and torsion demand. Premature wear due to overstressing of material and subsequent troublescan be excluded. The metal clamping claw enables a torsion-free assembly by its positioning. The connector can easiliy be dismounted – all components can be reused without problems. For the application in the field of gas the connector has an additional insert pipe to stabilise the pipe. For the application in the field of drinking water the connector has the proven EPDM profile gasket which reliably seals minor damages on the surface. The plug-in connectors for the application in the fields of water and gas additionally have a special o-ring. The sealing and clamping functions are separated and independent which makes the connector extraordinarily safe. Material:brass or lead-free brass Dimensions:for PE pipes diameter 25-63mm Application:Cold and warm water up to 40°C Application:Gas (with support tube) for pipes:PE80, PE100, PE-Xa, PVC

SANHA®-Heat Distribution cabinet, surface-mounted, galvanically zinc-coated steel sheet, painted white (RAL 9010), with removable door and locking bolt, installation depth 125 mm. Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

Original codes: E057 - CFC0098631 Compatible brands: Elica

Original codes: MCFE21 – 9029801496 – Type 57 - 4055171138 – model 57 - Typ-57 - Type57 - CFC0038668 - MOD. 57 - 38668 - DG81-02279A - MOD.v400 - CFC0140343 – AMC072 – 484000008824 – 12020222 – KIT01631388 Compatible brands: AEG - ArthurMartin - Bauknecht - Best - Bosch - Dedietrich - Elektrolux - Elica - Essentiel B - Fagor - Gorenje - Hotpoint-Ariston - IKEA - Indesit - Juno - KitchenAid - Leisure - Neff - Progress – Scholtes - Smeg - Thomson - Turboair - Whirlpool - WPRO - Zanussi - Zoppas

Mobile on floor or in the pit, mounted on a trolley. Grey reinforced fibre glass collector with drip-off grid without recycling unit. Load capacity 80l

Original codes: XBOGF - Smell Filter Compatibele brands: Bora

Original codes: 17005512 - Z92WWB1X6 – 17005381 - AA200100 Compatible brands: Neff - Gaggenau

Original codes: IKEA NYTTIG 120 Compatible brands: Ikea

Original codes: HF3007 - 73661-01 Compatible brands: Atag - Etna - Pelgrim