Produktai skirti aptvara (367)

1455NC1601 (Hammond Manufacturing Enclosures) 1455NC Series Enclosures - Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Aluminium allow to BS1490, LM2M - supplied in natural finish. • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998. • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance. • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head). • Countersunk lid holes. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Low profile - ergonomically designed for a comfortable fit into the user's hands. • Perfect for instrument or mobile data enclosures requiring a touch screen. • Choice of three sizes. All available with or without battery compartment. • Moulded from flame retardant ABS plastic, choice of black or grey - material carries a UL flammability rating of 94V-0. • Enclosure is assembled with six (6) - M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into the top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54. • P.C. board standoffs are moulded into case top and bottom halves.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Buy BC3 (BC Series Hand Held Plastic Enclosures - BCL Enclosures) - Black - 118mm x 66mm x 33mm - ABS Plastic. Purchase BC3 at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts

Product Features: • Rear of unit contain one or two (depending on console size), flat removable panels for easy modifications. • Standard versions are moulded from flame retardant ABS plastic. Material carries a UL flammability rating of 94V-0. • Economy version is moulded from general purpose (not flame retardant) ABS plastic. • Includes 4x black rubber feet per enclosure. For replacement packs of 24 feet, see part number 1421T2.

The small enclosure KX, terminal box KX, without a gland plate allows for flexible interior installation while maintaining a high protection category. The small enclosure KX, terminal box KX, without a gland plate allows for flexible interior installation while maintaining a high protection category. KX Terminal box, WHD: 150x150x120 mm, sheet steel, without mounting plate, with cover, without gland plate. Enclosure material:Sheet steel Cover Material:Sheet steel, all-round foamed-in PU seal Enclosure and cover Surface finish:Dipcoat primed, powder-coated on the outside, textured paint Colour:RAL 7035 Protection category IP to IEC 60 529:IP 66 Protection category NEMA:NEMA 4 Type rating to UL 508A:Type 3R/4 IK Code:IK08 Supply includes:Enclosure with cover, Mini cam lock Basic material:Sheet steel Dimensions Width:150 mm Dimensions Height:150 mm Dimensions Depth:120 mm Material thickness Enclosure:1.25 mm Material thickness Cover:1.25 mm Packs of:1 pc(s) Weight/pack:1.46 kg EAN:4.02818E+12 Customs tariff number:85389099 ETIM 7.0:EC002713 EC002713:EC002713 eCl@ss 8.0/8.1:27180101 eCl@ss 6.0/6.1:27180101

Sound insulation for heat pumps: A customised, made-to-measure enclosure can help to significantly reduce noise from heat pumps and thus provide more peace and quiet in the neighbourhood. If you want to install a heat pump, you should therefore consider using an enclosure. Self-assembly with assembly instructions possible. We supply also in larger quantities to OEMs.

Product Features: • Versions without mounting flanges are available in unfinished aluminium or smooth ASA 61 grey powder coat (Hammond colour GY2). • Versions with wall-mounting flanges are available in unfinished aluminium or smooth black powder coat (Hammond colour BK2). • Unpainted aluminium version is protected through manufacturing and shipping with a plastic film cover to ensure a high quality finish. Also doubles as a removable drilling template. • Steel finished in ASA 61 grey baked powder paint (inside and out to prevent rust).

System perfection. The new compact enclosure AX (sheet steel) offers maximum data quality and consistency in engineering, and flexibility and safety in assembly and interior installation. AX Compact enclosure, WHD: 380x300x210 mm, sheet steel, with mounting plate, single-door, with one cam lock Enclosure material:Sheet Steel Door Material:Sheet steel, all-round foamed-in PU seal Enclosure and door Surface finish:Dipcoat primed, powder-coated on the outside, textured paint Mounting plate Surface finish:Zinc-plated Colour:RAL 7035 Protection category IP to IEC 60 529:IP 66 Protection category NEMA:NEMA 4 Type rating to UL 508A:Type 3R/4 IK Code:IK10 Supply includes:Enclosure with door(s), Gland plate(s) in enclosure base, Mounting plate, Perforated door strip Basic material:Sheet steel Dimensions Width:380 mm Dimensions Height:300 mm Dimensions Depth:210 mm Enclosure Material thickness:1.25 mm Door Material thickness:1.5 mm Mounting plate Material thickness:2 mm Mounting plate Width:330 mm Mounting plate Height:275 mm Number of doors:1 Door hinged on the right, may be swapped to the left:yes Number of cam locks:1 Lock version:Cam Number of locks:1 Lock insert:3 mm double-bit Gland plate, size:2 Gland plate, qty.:1 Packs of:1 pc(s) Weight/pack:8.8 kg EAN:4.02818E+12 Customs tariff number:94032080 ETIM 7.0:EC000261 ETIM 6.0:EC000261 eCl@ss 8.0/8.1:27180101 eCl@ss 6.0/6.1:27180101

1455TSNUT (Hammond Manufacturing Enclosures) 1455NC Series Enclosures T-Nut with - Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail mounted components. • The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use. • Lid and mounting holes are located outside of the gasket seal. • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly and disassembly). • Heavy duty 16 gauge galvanized steel panels available. • All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Gasket is a preformed, high temperature U.L. listed silicone rubber. Gasket is replaceable. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Internal DIN rail mounting tabs.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

To see more information on this great range of products, simply click the link above or visit https://kgaenclosures.com We have over 30,000 products from great manufacturers, including Hammond Manufacturing, Deltron Manufacturing and Hylec APL Electronics. All products are available at great low competitive prices, with world-wide shipping available.

C3R12124SCNKO (Hammond Manufacturing Electrical Enclosures) C3R SC NKO Series - For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Buy AB77 (AB Series Adaptable ABS Plastic Enclosures - BCL Enclosures) - Black - 178mm x 122mm x 36mm - ABS Plastic. Purchase AB77 at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Heavy duty (0.1" thick) aluminium base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include four horizontal rows of louvers for ventilation. • Includes heavy duty (0.1" thick) aluminium raised mounting panel. Mounting surface includes 8 press nuts for mounting and a 5" (127mm) x 8.63" (219mm) area. • Front and back is recessed near the top with flange - to act as built in lifting handles. • Sold pre-assembled in a light textured - dark grey powder coat finish. • Comes with three cord grommets for front and rear holes and required assembly hardware. • Assembled with 8 self-tapping Philips head screws.

Product Features: • Standard lengths of 80mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Fixed extrusion width of 169.8mm. • Fixed extrusion height of 53.8mm. • Standard anodised colours include Black, Pre-Anodised Black and Silver. Custom anodised colours are available upon request. • PCB Size: • Maximum component width of 160mm • Maximum component height of 40.75mm • Weight 3.46 kg/m. • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, Sealing Kits, etc.

Machine equipped with door and pneumatic clamping device. The corresponding support surface enables the machining of cubes up to a maximum depth of 1400 mm. For additional machining of enclosures that cannot be dismantled on Perforex machining centres BC. Machining of cubics f. BC 1001 Design:Machining surface with door,Pneumatic clamping device, Additional support surface Benefits:Depth-variable, Use of the existing machine surface for the additional machining of cubes Note:Not suitable for retrofitting To fit Model No.:4050.101 Maximum machinable area for cubic parts (W x H):750 mm x 1400 mm Dimensions of clampable cubic parts (W x H x D):1200 x 1400 x 1400 mm for:BC 1001 HS Packs of:1 pc(s) EAN:4.02818E+12 Customs tariff number:84669360 ETIM 7.0:EC003456 ETIM 6.0:EC003456 eCl@ss 8.0/8.1:36609190 eCl@ss 6.0/6.1:36609190

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models are adaptable to a wide selection of Arduino's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Arduino boards are not included.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Boards are not included.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Buy BN16T (BN_E Series IP66 Series Transparent Door Enclosures - BCL Enclosures) - Grey / Transparent - 125mm x 175mm x 125mm - ABS Plastic - IP66. Purchase BN16T at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Buy BN15T (BN_E Series IP66 Series Transparent Door Enclosures - BCL Enclosures) - Grey / Transparent - 125mm x 175mm x 100mm - ABS Plastic - IP66. Purchase BN15T at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.