Produktai skirti vartojo (220)

Our precision grade N-BK7 windows are often used to seal optical enclosures & act as a protective window for the optical and electrical component behind the window, particularly within CCTV and ANPR systems where there is a risk of damage. N-BK7 provides excellent transmission in the visible and near infrared spectrum which can be enhanced still with our Anti Reflective coatings. Our stock range of ¼ wave N-BK7 or equivalent windows are supplied either uncoated or with the option of an Anti-Reflective coating on both faces with extended BBAR for visible and NIR applications within the 450-900nm wavelength range. We can also offer custom solutions for your application, whether it is a custom size or a coating to optimise a different wavelength range, beamsplitter coated or mirror coated to meet your bespoke requirements. Read PDF for more data Typical specs::N-BK7 or Equivalent Length/Width Tolerance::±0.1mm Thickness Tolerance::±0.1mm Flatness::>λ/4 over 90% aperture Surface quality::<40/20 Scratch/Dig Parallelism::1 arc minute Coating::Windows with the suffix “AV2” are coated on both faces with our extended broadband multilayer antire

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read the PDF.. Typical specs::. Material::Optical Glass or Acrylic Overall Diameter Tolerance::+/-0.2mm Focal Length Tolerance::± <5% Surface quality::<60-40 Scratch/Dig Coating::Optional

Knight Optical can offer Ground Glass Diffusers for use within Photography. We supply a range of Ground Glass Diffusers for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within photography. Ground Glass Diffusers are used in to diffuse the flash from cameras to prevent photos with harsh light and hard shadows to soften and improve the appeal of the image. Diffusers are also used in lightning systems to prevent glare from computer screens, the manufacture of lightboxes for advertising, viewing x-rays, and other applications. For more information read PDF… Material::Borosilicate, UV Fused Silica Shape::Square Diffusers, Circular Diffusers Dimensional Tolerances::+/- 0.25mm Diffusion grades::from 3µm

Knight Optical offer a range of Stock N-BK7 Dome Windows, for use with Underwater Lighting. A dome is an optical window composed of two parallel curved surfaces. Domes are commonly used in defence applications and often in extreme environments such as Submersible ROV’s. The shape of the window creates a naturally strong shape that gets tougher under pressure. Using a curved dome optical surface allows for an increased beam angle, therefore allowing a greater area to be lit from one light source. For visible applications, N-BK7 with its high optical quality and uniform transmission and low absorption in the visible spectrum makes it an ideal material for underwater lighting. A tough and cost effective solution which allows for good transmission of the light source in the underwater environment will both protect the light source as well as transmitting from 300nm up to 2µm. For more information read PDF Material::N-BK7 or Equivalent Diameter Tolerance::±0.1 Thickness Tolerance::±0.1 (±0.2 for >100mm diameter) Surface Quality::<60/40 Scratch/Dig Chamfer::0.2x45° typical Centricity::<0.1mm

Knight Optical are very experienced within the Thermal Imaging market, including anti-reflective and diamond-like-carbon coatings used on the optical components in these systems. Knight Optical know exactly what you are looking for. Thermal imaging uses infrared materials such as Germanium and Silicon, however in there raw form the transmission is not the best it could be. For example, Germanium typically transmits at <45% but with an AR coating applied, it can improve transmission to >60%. This increase in transmission means that the camera sensor receives a better signal through the protective window. Also with protective windows, we can provide high quality DLC coatings. We ensure the coating is Salt Fog Tested to MIL-SPEC standard to ensure that the coating withstands harsh environments. The coating has high mechanical hardness and high resilience to external stress. Read PDF for more information

As UVC sterilisation becomes more prevalent, Knight Optical can offer UV domes to house LEDs and LED arrays, as well as other light sources. We stock ready-to-order 50mm and 100mm UV fused silica domes with high transmission down to 185nm, meaning it encompasses the traditionally used UVC light sources – KCl excimer lamps (222nm), mercury lamps (254nm) and LEDs (265nm, 273nm and 280nm). Knight Optical can also provide custom domes, including with a flange for easier mounting, manufactured from UV fused silica. Also available are optical coatings to enhance the performance of the dome. Quality Assurance All optical components are tested in our state-of-the-art metrology laboratory to ensure they meet every specification, and then 100% visually inspected by our highly trained quality technicians. Knight Optical prides itself on the quality of our optical components, and you can be confident that our products will fit seamlessly into your UVC system.

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read PDF …. Material::Optical Glass or Acrylic Overall Diameter Tolerance::+/-0.2mm Focal Length Tolerance::± <5% Surface quality::<60-40 Scratch/Dig Coating::Optional

Knight Optical can offer Amici Roof Prisms for use within Imaging Industry. We supply a range of Amici Roof Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Imaging Industry. Amici Roof Prisms are often used in the development of telescope eyepieces and endoscopes, where they revert and invert the image while redirecting the beam by 90 degrees. For more information read PDF … Material::N-BK7 or equivalent, UV Fused Silica, Dimensional Tolerances::+/- 0.2mm Angles::+/- 30 arc seconds Surface Figure: :< 0.5 waves Surface quality::< 40-20 Scratch/Dig

Knight Optical can offer Littrow Prisms for use within Laser Applications. We supply a range of Littrow Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Laser Applications. Littrow Prisms are used near the end of an optical cavity of a laser system to finely adjust the output frequency by changing the AOI of the prism. For more information read PDF … Material::SF11 or equivalent, F2 or equivalent, UV grade fused silica Dimensional Tolerances::+/- 0.2mm Angles::+/- 1 arc minutes Surface Figure::< 0.5 waves Surface quality::< 40-20 Scratch/Dig Coating::Antireflective < 0.2% @ 550nm

Knight Optical can offer Light Guides for use within the Cosmetics Industry. We supply a range of Light Guides for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within the Cosmetics Industry. Our Light Guides are the key element in cosmetic laser, or intense pulsed light (IPL) applications. IPL is a cosmetic application commonly used for hair removal. IPL application have requirements of different wavebands and so our custom light guides are available in a choice of materials and coatings to suit your waveband requirements. For more information read PDF… Material::N-BK7 or equivalent, Sapphire and UV Fused Silica Dimensional Tolerances::+/- 0.1mm Surface quality::< 40-20 Scratch/Dig Coatings::< AR Coatings available on request

We supply a range of Telecom Grade Windows for a range of applications - Knight Optical can offer Telecom Grade Windows for use within Fibre Optic Applications. We supply a range of Telecom Grade Windows for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Fibre Optic Applications. Our Telecom Grade Windows are coated to minimise reflection in the telecoms waveband. These windows are optimized for fibre optic applications in the S and C bands between 1460nm to 1565nm while maintaining excellent transmission out of the operating wavelength. For more information read PDF… Material::B270 or equivalent, White Float Shape::Circular Windows, Square Windows Dimensional Tolerances::+/- 0.1mm Parallelism::+/- 5 arc minutes Surface Figure: :< 5(1) @ 633nm Surface quality::< 40-20 Scratch/Dig

We supply a range of Visible Sheet Polariser for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Consumer Electronics. Our Linear Polarisers linearly polarise unpolarised light and can block light that is polarised in the opposite direction. Linear Polarisers are often used in the production of LCD monitor and TVs. The liquid crystals act like a wave-plate, rotating the polarisation axis allowing them to control the amount of light from each pixel. They are used in a similar way for a photographer to prevent surface reflections from water. Our polariser sheets allow different levels of total light from a randomly Read PDF for more information... Shapes: :Circular Polarisers, Square Polarisers Dimensional Tolerances::+/- 0.5mm Surface Quality: :< 60-40 Scratch/Dig

Knight Optical can offer Cube Beamsplitters for use within the Scientific Industry. We supply a range of Cube Beamsplitters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in the scientific industry for use as components within spectrophotometers and interferometer. For interferometry, beamsplitters are used to separate light into two beams to compare a reference against a sample. Cube beamsplitters offer some advantages over plate beamsplitters in that they don’t suffer from ghost images and are easier to mount. For more information read PDF… Material::N-BK7 (or equivalent), UV Fused Silica Wavelength Ranges::Visible (400-700nm), NIR (630-1100nm), Telecom (1050-1700nm) Dimensional Tolerances::+/- 0.3mm Parallelism::< 3 arcminutes Surface quality::<40-20 Scratch/Dig Coating::AR coatings for application bandwidth on external surfaces

We supply a range of Wedge Prisms for a range of applications. All individually QA checked, and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Forestry. Wedge Prisms are used in a similar manner to an angle gauge, when plotting the basal area of a group of trees. Wedge prisms are also used in beam steering. All our Wedge Prism are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Starrett AV300 Video Imaging System and our Trioptics PrismMaster. This allows us to work to the highest QA standards and meet the tolerance specifications on these precision components. Read PDF for more... Material::N-BK7 or equivalent Dimensional Tolerances::+/- 0.15mm Angles::+/- 30 arc seconds Surface Figure: :< 0.25 waves Surface quality::< 40-20 Scratch/Dig Coating::A range of AR coatings are available for your chosen wavelength.

Knight Optical can offer Lithium Fluoride Lenses for use within UV Applications. We supply a range of lithium fluoride lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers using UV optics such as UV lasers. UV lasers are beneficial in some applications as opposed to longer wavelengths such as infrared or visible light as they do not heat the areas around the target. This allows the laser the cut materials by breaking atomic bonds, rather than melting the material. Due to the large band gap for Lithium fluoride, it’s crystals are more transmittive to short wavelength UV radiation than any other material and are ideal for use in X-Ray monochromators, as for use in VUV, UV, Vis and IR spectrums. For more info read PDF… Material::Lithium Fluoride (LiF) Shape::Spherical Lenses, Cylindrical Lenses Dimensional Tolerances::+/- 0.1mm Parallelism::< 3 arcminutes Surface quality::<60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

Binoculars and Periscopes invert an image to make an object appear closer. There are two types of prisms that can be used for binoculars: Porro and Roof Prisms. Porro prisms are used in a pair to create an optical path. The image would pass through the first prism and which then inverts the image, the second prism then flips the image, so it is making the distant object appear closer. Roof prisms work in a similar fashion however are one prism and this design performs in the same way. Used particularly for smaller compact spaces as there are aligned in one piece to its objective lenses. Knight Optical’s Porro and Roof Prisms are available from stock, manufactured from high quality BK-7 or equivalent. They are also available to custom specifications with our capabilities for the two types: •General Dimensions: 5mm to 300mm+ •Angular tolerance: <3arcseconds •Surface form: <1/10th wave @ 633nm •Surface quality: 10:5 •Coating options: AR or Mirror Read PDF for Info

Knight Optical offers a range of precision optical components for use in IPL (Intense Pulsed Light) applications. The most common usage of IPL systems are typically used as photo epilators.Custom Ceramic Reflectors are a key component for this application. The xenon flash lamp which are typically used emit light in 360 degrees. However utilising ceramic reflectors which are light reflectors with a U channel means that light which would normally be wasted i.e. shining backwards is now refocused down into the filters and light guides. Knight Optical provides ceramic reflectors which are typically moulded from alumina. This choice of material is down to its ability to withstand thermal stresses and high reflectivity values. For more information read PDF

Knight Optical can offer Gas Cells for use within the Chemical Analysis. - Knight Optical can offer Gas Cells for use within the Chemical Analysis. We supply a range of Gas Cells for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within the chemical analysis industry. Gas cells are used in spectroscopy for identification of the contents of gases. The path length and window material are chosen for analysis of different concentrations and types of gas. Depending on the types of gases being analysed, the windows in a gas cell can be made from NaCl, KBr, CaF2, BaF2, or ZnSe and will be chosen depending on bandwidth, to meet the customer’s application. All our Gas Cells are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory Material:NaCl, KBr, CaF2, BaF2, ZnSe or stainless steel bodies Shape:Short Path, Long Path, Variable Path Dimensional Tolerances::+/- 0.1mm Parallelism::< 3 arcminutes Surface Quality: :<60-40 Scratch/Dig Transmitted Wavefront Error: :< 0.25 λ PV@ 633nm

Knight Optical can offer Custom Homogenizing Rods for use within Electrical Instruments. Electrical instruments use backlight displays to help illuminate and evenly distribute the light source. They can be used as mixers, which is when you want to mix colours from multi-colour LEDs together. The light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to help transmit light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipe’s critical angle; this defines the angle of acceptance at which the total internal reflection will occur. For more information read PDF Material::BK7 (or equivalent), UV Fused Silica or Other Optical Glass Length Tolerance::+/- 0.3mm Aperture Tolerance::+/-0.1mm Surface quality::<60-40 Scratch/Dig Coating::Optical

Optical Sorting Systems are a widely utilized technology used within the food industry; most particularly used in processing harvested foods such as fruits and vegetables, most notably potatoes, and nuts. Optical sorting was designed to help improve product quality, maximize throughput and increase yields. Within an optical sorting system there are four main components, the feed system, the optical system, the image processing software and last the separation system. The optical system utilizes lights and sensors housed above and below the flow of the products being inspected. It works by using a combination of light and sensors to illuminate objects; and to do this Beam-Splitters are one of the optical components used. Within the camera used in the system a Beam-Splitter cube is used to divide the light source coming from a single lens, into different channels; and each channel is filtered to a specific spectral region Read PDF for more data Material::N-BK7 or Equivalent; UV Grade Fused Silica Dimension Tolerances::+0, -0.02mm Flatness::<λ/4 over CA Surface quality::<40/20 Scratch/Dig Angles: :+/-1 arcmin Coatings::Visible and NIR Coating options available

Intense Pulsed Light Systems use not only use filters, that are used to filter out the UV wavelength range; and transmit between 400-1200nm for use within cosmetic lasers that are designed to remove unwanted hair, vascular treatment and even acne treatment. But they also use Homogenizing Rods to help evenly distribute light. The Light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to channel the light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipes critical angle; this defines the angle of acceptance which the total internal reflection will occur at. All our Homogenizing Rods are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Trioptic’s PrismMaster, and Starrett AV300 Video Imaging System.. FOR MORE INFORMATION READ PDF.. Length Tolerance::+/- 0.3mm Aperture Tolerance::+/-0.1mm Surface quality::<60-40 Scratch/Dig Coating::Optional

Knight Optical can offer IR-cut filters for use in Heat Shielding. We supply a range of Custom and Stock IR-cut filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Heat Shielding requirements. Our IR-cut filters allow good transmission levels of visible light but cut off IR and UV radiation. Our precision grade filters have an AR coating to increase their visible transmission. In many systems that require heat shielding while still needing visibility an IR-cut filter can be used. These can attenuate infrared radiation and allow through visible light, allows your temperature sensitive equipment For more information read the PDF…… Material::Borosilicate Dimensional Tolerances::±0.2 Transmission::Tavg>90% 420-620nm (Standard Grade) Transmission::Tavg>94% 420-620nm (Standard Grade) Blocking::Tmax<2% 700-1000nm Wavelength Accuracy: :±10nm Surface Accuracy:60/40 (Standard Grade) Surface quality::60/40 (Standard Grade)

Knight Optical can offer Hot Mirrors for use in Heat-Sensitive Systems. We supply a range of hot mirrors for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specs. What’s more, our Hot Mirrors are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers working with Heat-Sensitive Systems. Hot Mirrors are designed to transmit visible wavelengths and to reflect heat, causing infrared wavelengths. Hot mirrors have a sharp cut-off between Infrared (IR) and visible because they have a dielectric coating that can be controlled for different AOIs (most commonly 0°). For systems that require heat shielding while still needing visibility, hot mirrors can be used. These can attenuate IR radiation and allow visible light, which permits your temperature-sensitive equipment to be visible. Material::Borosilicate Shape::Circular Mirror, Square Mirror Dimensional Tolerances::+/- 0.1mm Parallelism::< 5 arcminutes Surface Accuracy: :< 5(2) @ 633nm Surface quality::< 40-20 Scratch/Dig

CMOS sensors are used within commercial grade Digital SLR cameras as a replacement for the more expensive CCD. These CMOS sensors are extremely sensitive to IR light, which can lead to discolouration. IR cut filters are used to block the IR light, meaning that photographs are taken with life-like colours. Colour Glass Filters can be used in variations of Bandpass, Long pass and Short pass, depending on which wavelengths of light need to be blocked resulting in different key areas being more easily distinguished. Knight Optical offers Colour Glass and IR cut filters for such an application, with a wide range of band widths and cut on/off wavelengths. As above these are available as Bandpass, Long pass or Short pass filters and we can also offer customised filters with coatings specific to the wavelength of your choice. We hold a massive inventory of IR cut, Bandpass, Long Pass and Short Pass filters: Read PDF for more info…. Material::Colour Glass and Borosilicate/D263T or equivalent Diameter::+0.0 / -0.20 mm Length/width::± 0.20 mm Thickness: :± 0.20 mm Surface quality::<60-40 scratch/dig or <20:10 for HD cameras Parallelism::<3 arcmin

Exhaled Breath = 78.04% Nitrogen + 13.6%-16% Oxygen = CO2 Car Exhaust = Carbon Dioxide + Carbon Monoxide + Sulphur Dioxide + Nitrogen Oxides + Hydrocarbons How do we know this? Gas detection in Continuous Emission Systems (CEMS), combustion analysers and environmental monitoring are key to ensuring that the world we live in is monitored for its pollution and environments we work in are safe to do so as gases can be detrimental to life. Knight Optical provide a number of optical components that are used in Gas Detection Systems. We can also provide interference bandpass filters that work within the IR, front surface mirrors, gas cells and singlet lenses and window made from Germanium (Ge), Calcium Fluoride (CaF2), Silicon (Si), Quartz/ Fused Silica, Magnesium Fluoride (MgF2) and Sapphire (Al2O3). Read PDF for more information …. Diameter Range: :less than 5mm to 300mm Diameter Tolerance: :better than ± 0.1mm Thickness Tolerance::+/- 0.2mm Clear aperture: :90% Centration tolerance::better than 1 arc minute Form error::better than 0.5 wave (633nm) over aperture Surface radius tolerance: :less than 1 fringe over aperture Surface quality::< 40-20 scratch/dig Coating::AR/DLC (Diamond like coating @ 1-14μm)

Knight Optical can offer Circular Sheet Polariser for use within Photographic Applications. We supply a range of Circular Sheet Polariser for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Photographic Applications. Our Circular Polarisers consist of a quarter wave plate cemented to a linear polariser. While a linear polariser may be used to reduce glare during photography (such as reflection from the surface of a body of water), autofocus systems struggle to correctly focus on linearly polarised light. With the addition of the quarter wave plate, this has little impact on the intensity of incident light to the sensor, but it makes autofocussing much easier. For more information read PDF… Shapes: :Circular Polarisers, Square Polarisers Dimensional Tolerances::+/- 0.5mm

Knight Optical offer a range of Stock Sapphire Windows, and custom for use within Airborne LiDAR Systems. These are systems used in surveying for topographical measurements. The data accumulated can be used to generate a Digital Terrain Model or a Digital Elevation Model which are 3D representations of terrain. Sapphire (Al2O3) is one of the hardest minerals and optical materials available for use in the range from UV up to 5µm. Making it ideal as a protective window for airborne systems which may be utilised in harsh environment or against birds! Sapphire is grown by various methods from seed samples. Sapphire can be polished to a high standard, but as it is the second hardest mineral on Earth it must be subject to high forces to polish. Therefore, windows made from Sapphire must have a thickness to diameter ratio of at least 10:1, that is, greater For more information read PDF…. Material::Sapphire (AL2O3) Random or C-Cut grades Diameter Tolerance::+0.0/-0.20 mm Length/Width Tolerance::+/- 0.10mm Thickness Tolerance::+/-0.10mm Wavelength Range::0.17 – 5.5µm Transmission::Tavg=85% dependant on substrate thickness Surface quality: :<40-20 scratch/dig Coatings::AR coating options to meet your wavelength requirements

Knight Optical can offer Heat Filters for use in Heat Sensitive Systems. We supply a range of heat Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Sensitive Systems. Heat Filters are designed to transmit visible wavelengths to absorb or reflect heat causing infrared wavelengths preventing it from reaching your system. Care has to be taken in the design of systems using heat filters. Absorptive blockers will heat up with use and could result in damage to the filter. Reflective blockers will redirect the heat to another location in your system. For more information read PDF …. Material::Schott KG1, Dielectric Coated Borosilicate

Knight Optical can offer Fire-Polished Aspheric Lenses for use within Optical Systems. We supply a range of Fire-Polished Aspheric lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Aspheric lenses are used to correct for spherical aberrations and can be as effective a multi-lens system while taking up less physical space and reducing weight and cost. As such these lenses are often used in military applications, such as night vision goggles or missile guidance systems For more information read PDF ….. Material::B270 or equivalent, Borosilicate Dimensional Tolerances::+/- 0.25mm Surface Quality: :< 60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

Ball Lenses are widely used for focusing & coupling light into & out of fibres. With the high refractive index of Sapphire (Al2O3) material, it yields a low spherical aberration that can be used in the range of UV from 200nm up to 5µm, and with it being one of the hardest materials they are resistant to damage. The key feature of ball lenses is their short back focal length allowing for precision coupling where size or space is a limiting factor in the system. Typically used in pairs, where one lens acts as collimator for the second to focus the light back into the coupled fibre. Ball Lenses are manufactured from a single substrate of glad and therefore, depending on the geometry of the input source, can focus or collimate light. Half Ball Lenses can also be used as an interchange with a full ball lens for more compact designs. Read the PDF for more information... Material::BK7 or equivalent, Sapphire, Ruby, Quartz Diameter Tolerance::±2.5 Figure (sphericity)::1λ Focal Length (@587mm)::± 0.2% (<10mm), ±2.0% (10-1000mm), ±5.0% (>1000mm) Surface quality::<40-20 Scratch/Dig Back Focal Length (mm)::0.05 up to 2.34 for stock parts Focal Length (mm)::0.345 up to 7.34 for stock parts