Produktai skirti talpykla (586)

Our metal galvanized waste containers can be specially produced in line with the technical specifications of the product. It can be produced as hot dip galvanized or original galvanized. It can be produced with and without pedal options. Apart from 1100 liters, it can also be produced in 770 liters, 660 liters and 400 liters capacities.Metal Galvanized Waste Container – Our 1100 Liter product is manufactured from A-1 quality galvanized sheet.It can be produced as hot dip galvanized or original galvanized.It can be produced with and without pedal options.Body and base are manufactured from a single piece of sheet metal in a conical shape to increase strength. In addition,strength-enhancing form has been given to the side parts. PRODUCT CODE:TK-GAL-CL

Volume: 160 ml Top Diameter: 95 mm Bottom Diameter: 73 mm Height: 46 mm Raw Material: PP Sealable: Yes Product code:DST1012

770 Liter Hot Dip Galvanized Waste Container (Dome Lid Model)Body 1.50 mm. It is formed by bending and pressing as a single piece of sheet metal and its strength is increased. Base corners have radius. The assembly of the body sheet and side sheets is made by pressing 20.00 mm on the edges of the side sheets. It is mounted externally to the body sheet with a wide bent protrusion or lip and is completely welded, including the radii, without interruption.The body weld and other welds were welded without slag using the gas arc technique.The body mouth is completely surrounded by a pipe profile.Lift arms and cover connection 2.50 mm. It is welded onto the sheet metal apparatus and screwed onto the body.Lift arms are manufactured in accordance with EN standards. Cover arms 3.00 mm. is.Cover 1.40 mm. It is manufactured from sheet metal as a system that can be opened around its own axis. Product Code:TK-770-SDCK

ASHTRAY MODELBucket Diameter32 cmBucket Height50 cmFoot Width81 cmFoot Width36 cmIT HAS an ASHTRAY Product Code:TK-AKL-K

It has a medical waste emblem.The raw materials used are resistant to sunlight, heat and cold.Optionally, a magnetic lock system can be added.All 4 of the wheels rotate 360 ​​degrees, 2 of them have brakes and 2 of them have swivels without brakes.The products have the feature of nesting.If desired, the door can be opened more easily by adding a pedal to the product.There will be a CAUTION MEDICAL WASTE logo and text on the front surface.It is produced according to EN 840 – 6 Standards.The measurements given below are approximate and there may be +/- 5% deviation in the measurements.MEDICAL WASTES - Infectious WastesMicrobiological laboratory wastes (Culture and stocks, Infectious body fluids, Serological wastes,Other contaminated laboratory wastes (lamella, pipette, petri dish, etc.)Blood-blood products and objects contaminated with them.Used surgical clothes (fabric, apron, gloves, etc.)Dialysis wastes (waste water and equipment) Quarantine wastes PRODUCT CODE:TK-770-TAK

2 SECTION RECYCLING SET PAINTED 2510 - Metal Zero Waste Recycling Bins Product Code:TK-2510-GDK2

Conteneur à déchets médicaux 240LT

Conteneur à déchets galvanisé de 1100 L: Nos conteneurs à déchets galvanisés en métal peuvent être spécialement fabriqués conformément aux spécifications techniques du produit. Ils peuvent être produits en galvanisation à chaud ou en galvanisation originale. Ils peuvent être produits avec ou sans option de pédale. En plus de 1100 litres, ils peuvent également être produits dans des capacités de 660 litres et 400 litres.

Public Area Garbage Bins:Height 40cm Print 24 cm Volume 15 liters 304 Quality Stainless Steel Product Code:TK130

200 ml Container pentru mostre - Container pentru mostre CODUL PRODUSULUI:027A - 027N Steril:Aseptică și nesterilă Materii prime:Polipropilenă Numărul codului de bare:A: 8682009086395 N:8682009086388 Număr de catalog:A: NK.19.395 N: NK.19.388

770 LITER METAL GARBAGE CONTAINER Body and base bent from single piece of galvanized sheet. Strength is increased by pressing the body and sides. Body sheet thickness is 1,5 mm. Cover sheet thickness made of 1,20 mm, considering its lightness. Cover hinges ensure that cover is fully opened and closed. The wheel connection sheet is 3 mm. Container lifting arm sheet is 3 mm. Container lifting arms is made of produce from 16 mm steel. Container arms are mounted to the body with 8 steel bolts. The wheels are 150x45 in size. All 4 of the wheel rotate 360 degrees, 1 of them has a brake. Garbage container is produced according to the garbage truck lifting system. The our container is welded with completely slag-free gas arc welding. All materials used in our container are first quality and TSE certificied. PRODUCT CODE:MT-770

7431 800 LT GALVANIZED WASTE CONTAINER - Garbage Containers

Volume: 120 L -Dimensions: 925 x 465 x 580 mm -Loading Capacity: 60 Kg -Weight: 7,5 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: -30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the product PRODUCT CODE:PCK-120

7265 POLE TYPE PLASTIC WASTE BIN - Garbage Containers

RECYCLING SET OF 2 STAINLESS & UNBREAKABLE GLASS 1854 - Metal Zero Waste Recycling Bins Product Code:TK-GDKM2-1854

Volume: 230 ml Top Diameter: 95 mm Bottom Diameter: 73 mm Height: 46 mm Raw Material: PP Sealable: Yes Product code:DST1004

Body and cover, each of which is printed in one piece with high-density polyethylene(HDPE) injection method, with a warranty certificate and certificate. -Fully recyclable, resistant to violet and infrared rays, acids, and alkalis, and high and low air temperatures. On the sides of the chamber, there are four handles, two on the side and two on the back, which is strengthened with channels. -A flat lid that is mounted on the back of the container with a hinge from one end to the other and can be opened manually thanks to the through handles on the front. -DIN 30700 male attachment with stamped lifting grooves on the front edge of the container and no cutting edges or sharp corners. Also available with “Trento” and Ochsner-type attachments. PRODUCT CODE:PCK-660P

Volume: 290 Top Diameter: 72-115 mm Bottom Diameter: 55-98 mm Height: 55 mm Raw Material: PP Tamper Evident: Yes Product code:DST1010

Basic Data Filling Volume: 180 ml Volume Brimful: 230 ml Container Weight: 10 gr Lid Weight: 2,50 gr Tamper Evidence: Yes Dimensions: Body External Diameter Top : 75,20 mm Product code:DPC180

CONTENEUR D'URINE INTÉGRÉ CODE PRODUIT:024EA - 024EN STÉRILE:Aseptique et non stérile Matière première:Polypropylène Numéro de code barre:8682009086210 N:8682009086227 Numéro de catalogue:A: NK.17.210 N: NK.17.227

Our 120 Liter Packaging Waste Container product has been selected so that the raw material used is resistant to direct sunlight, heat and cold and has been manufactured all of them. Our product, which has been tested against various difficulties that may be encountered, has passed all the tests successfully.The raw material used is a raw material in accordance with TSE Standards. This raw material is used in all parts of our product.The measurements given below are approximate and there may be +/- 5% deviation in the measurements. PRODUCT CODE:TK-120-AMBA

SET OF 4 70 LT Polycarbonate Zero Waste Recycling Box Zero waste Box Dimensions: 35 x 35 x 70 cm TK-4-GDKKSET OF 4 70 LT Polycarbonate Zero Waste Recycling Box (Box)Zero waste bins are colored according to different waste situations.It is produced in the desired sizes according to the order and the desired image and printing label is attached to it by silk screen printing.Our zero waste boxes are produced from 3mm, 4mm, 5mm, 6mm thick PP corrugated sheets.Zero waste Box Dimensions: 35 x 35 x 70 cm. Product Code:TK-4-GDKK

Filling Volume: 600 ml Volume Brimful: 650 ml Container Weight: 22,50 gr Lid Weight: 7,20 gr Tamper Evidence: Yes Dimensions: Body External Length Top : 137,40 mm Product code:DPC500

Outer Dimension: 940 x 480 x 540 mm Material: HDPE Galvanized Steel Shaft Cover: Hinged Cover Certificate: EN 840 Size:940 x 480 x 540 mm Color:Black

Volume: 230 ml Top Diameter: 95 mm Bottom Diameter: 65 mm Height: 53 mm Raw Material: PP Sealable: Yes Product code:DST1004

It is made of 430 quality stainless steel. It has a plastic inner bucket. The pedal and cover connection apparatus are made of steel. Product Code:TK-PCK-1001

Public Area Garbage Bins:Height 70cm Print 36 cm Volume 70 liters 430 Quality Stainless Steel Product Code:TK195

Public Area Garbage Bins:Height 66cmPrint 30 cm Volume 38 liters304 Quality Brushed Stainless Steel Product Code:TK128

7586 LARGE PLASTIC BOX - Garbage Containers

prefabex modular flat pack buildings are all fully insulated, and due to their unique construction system, they can be easily situated in any desired location. They represent also perfect solution for Worksite Buildings, Office and Living Containers, Home Offices, School/College Classrooms, temporary housing and storage, Marketing Suites and Site Accommodation. Standard features of our modular building products: Simple assembly Easy transportation Modular system allows you to join units together side by side Design flexibility Thoughtful services before and after sales Low cost insulated walls and ceiling panels External Wall / Interior Wall:5 cm EPS Sandwich Panel Electrical Installation / Sanitary Installation:On the plaster / On the plaster Exterior Paint / Interior Paint:Electrostatic Furnace Painted Galvanized Sheet Wind Resistance Capacity:102 km / h Exterior Door / Interior Door / Windows:Sheet Metal / MDF / PVC Double Glass Roof Coating:Natural Galvanized Sheet Snow Load Carrying Capacity:1 m² / 80 kg Chassis Load Carry Capacity:1 m² / 200 Kg