Produktai skirti kompresorius (480)

This oil-free compressor-aggregat is equipped with a capacitor, vibration absorbers and a silencer. Voltage (*) V:230 Frequency (*) Hz:50(60) Motor KW:0.42 suction capacity/displacement l/min:86 Delivery rate/FAD@ 5 bar l/min:56 Max. Stromverbrauch/Max. Current A:3.3 Weight kg:8.4 Sound emissions/noise level dB(A)/1m:62 Operating mode/duty cycle:S1 ~ 100% Dimensions (lxwxh)/Dimensions (lxwxh) mm:240 x 134 x 198

Hochwirtschaftliches Drehkolbenverdichter-Aggregat mit Riemenantrieb und innerer Verdichtung bis 70 % Vakuum. Ölfrei nach Klasse 0. Absorptionsmittelfreier Druckschalldämpfer, niedrige Schallpegel. Reduzierte Wartungskosten und gesenkter Energieverbrauch für nachhaltig geringe TCO. Extrem zuverlässig und langlebig. Volumenstrom::110 bis 9.000 m³/h Unterdruck::-700 mbar Fördermedium::Luft und neutrale Gase

PROFI-LINE CONSTRUCTION SITES MODEL L-420-50.W11B - PROFI-LINE CONSTRUCTION WORKS COMPRESSORS Voltage (*) V:230 Frequency (*) Hz:50 Motor KW:2,2 suction capacity/displacement l/min:410 Delivery performance at 8 bar/FAD 8 bar l/min:186 Max Pressure/Max pressure bar:11 power consumption/max. current A:15 Tank volume/tank size Liter:50 Weight kg:82 Schallemission/Noise level dB(A)/1m:80

This oil-free compressor-aggregat is equipped with a capacitor, vibration absorbers and a silencer. Voltage (*) V:230 Frequency (*) Hz:50(60) Motor KW:0.75 suction capacity/displacement l/min:145 Delivery rate/FAD@ 5 bar l/min:100 Max. Stromverbrauch/Max. Current A:4.6 Weight kg:11.5 Sound emissions/noise level dB(A)/1m:67 Operating mode/duty cycle:S1 ~ 100% Dimensions (lxwxh)/Dimensions (lxwxh) mm:275 x 140 x 240

High Capacity Monoblock Pumps Available in cast iron construction, the 2AV1 family provides capacities up to 600 m 3/h (360 CFM) in a compact monoblock design. When compared to conventional pumps, the 2AV1's monoblock design delivers the benefits of a simple, compact and economical installation. Since the pump and motor are integral and self supporting, there is no need for additional baseplates, couplings or guards, which add to the cost, complexity and overall size of the installation. We focused on durability and dependability when we developed these liquid-ring pumps. With a reinforced stainless steel shaft and sealed bearings, the 2AV1 can provide up to 20,000 hours of maintenance-free operation. The 2AV1 is expertly designed and manufactured to be quiet and vibration free. With sound pressure levels of less than 75 dBA, it complies with the strictest noise standards, eliminating the need for additional sound attenuating devices. Advantages at a glance Compact Rugged design for reliable operation and long service life Precision-balanced rotor 60hz Motors, UL recognized components Available from stock Low installation costs Easy to service Standard mechanical seal Reinforced stainless-steel shaft in the pump body Main Applications Plastics industry Chemical industry Medical technology Food and beverage industry General industry

MASTER-LINE PISTON MODEL L-650-270.D10S PLUS - MASTER-LINE PISTON COMPRESSORS Voltage (*) V:400 Frequency (*) Hz:50 Motor KW:4 suction capacity/displacement l/min:650 Delivery performance at 8 bar/FAD 8 bar l/min:460 Max Pressure/Max pressure bar:10 power consumption/max. current A:8,5 Tank volume/tank size Liter:270 Weight kg:ca. 310 Sound emissions/noise level dBA:80

MASTER-LINE PISTON MODEL L-1400-500.D15 - MASTER-LINE PISTON COMPRESSORS Voltage (*) V:400 Frequency (*) Hz:50 Motor KW:11 suction capacity/displacement l/min:1.400 Delivery performance at 8 bar/FAD 8 bar l/min:1079 Max Pressure/Max pressure bar:15 power consumption/max. current A:22 Tank volume/tank size Liter:500 Weight kg:370 Sound emissions/noise level dBA:80

18 - 75 CFM / 30 to 127 m³/h Innovative and economical monoblock pumps The NASH 2BV7 pumps have been designed to provide superior performance for a wide array of applications. Available from 18 to 75 CFM (30 to 140 m³/hr), their high vacuum capability, extra water handling ability and compact size combine to make an ideal machine for industries like plastics manufacturing and medical technologies. Combining quality construction with reliability The simple construction and quality materials of the 2BV7 combine for an extremely reliable machine. Featuring a corrosion free compression chamber that includes a stainless steel body, shaft and port plate, these pumps provide excellent resistance to to corrosive and errosive media. Whats more, with the corrosion free materials, the one moving part (the rotor) is ensured to turn freely even after long periods of inactivity. For worldwide use and available for quick delivery. The 2BV7 is equipped with a very versatile motor that is ready to be installed nearly anywhere throughout the world. The motor includes wide voltage range capability, an IP55 enclosure and is suitable for 50/60 Hz service. It also comforms to international standards, including UL and CSA. Providing a motor designed for the global market ensures that the 2BV7 is available when you need it, whether here or abroad.

This oil-free compressor-aggregat is equipped with a capacitor, vibration absorbers and a silencer. Voltage (*) V:230 Frequency (*) Hz:50(60) Motor KW:0.35 suction capacity/displacement l/min:66 Delivery rate/FAD@ 5 bar l/min:38 Max Pressure/Max pressure (*) bar:8 Max. Stromverbrauch/Max. current A:3.3 Weight kg:8.4 Sound emissions/noise level dB(A)/1m:62 Operating mode/duty cycle:S1 ~ 100% Dimensions (lxwxh)/Dimensions (lxwxh) mm:240 x 134 x 198

3000 - 16000 CFM / 5,100 to 27,200 m³/h The NASH 904 , which replaced the popular NASH CL pump in the 1980's, can still be found at Gardner Denver Nash. Capacities of the 904 pumps range upward from about 3,000 CFM at vacuum. These durable pumps can handle excess liquid carryover without any difficulty, even if it arrives as massive slugs. 904 pumps are found in many industries including Paper, Chemical, and Mining. All 904 models are still available from Gardner Denver Nash, the original designer and manufacturer. Whether you have an existing 904 pump running in your plant that is in need of service, repair, or replacement with a new or remanufactured duplicate 904/905 pump, Gardner Denver Nash is there for all of the above.

MASTER-LINE SCREWS MODEL SC-15-500.D10KT - MASTER-LINE SCREW COMPRESSORS

MASTER-LINE PISTON MODEL L-1400-270.D10S PLUS - MASTER-LINE PISTON COMPRESSORS Voltage (*) V:400 Frequency (*) Hz:50 Motor KW:7,5 suction capacity/displacement l/min:1.400 Delivery performance at 8 bar/FAD 8 bar l/min:910 Max Pressure/Max pressure bar:10 power consumption/max. current A:15 Tank volume/tank size Liter:270 Weight kg:ca. 420 Sound emissions/noise level dBA:80

1500 - 19000 CFM / 3,000 to 9,500 m³/h Nash's 2BE3 and 2BE4 series compressors have capacities ranging from 1,500 to 19,000 CFM (2,500 to 33,000 m³hr). Designed to operate in demanding environments like the paper, power, mining and chemical process industries, these compressors offer durability and reliability at a low cost of operation. Each model is equipped with an application-proven polyisoprene-lined body for added corrosion & erosion resistance. The unique inlet configuration allows for both top and side inlet arrangements to accommodate low headroom installations. In installations where space is limited, the top discharge capability of the 2BE3 and 2BE4 allows the use of a top mounted discharge separator that saves floor space and eliminates the need for a trench. These compressors allow efficient operation over the entire vacuum range without the need to change the compressors's internals. When equipped with a center shroud, split vacuum operation up to 12 in. Hg (400 millibar) differential can be achieved. Large inspection ports allow easy access to pump internals for inspection and maintenance. For more aggressive applications, stainless steel, stainless steel clad and epoxy coated components are available.

MASTER-LINE SCREWS MODEL SC-30.D10 - MASTER-LINE SCREW COMPRESSORS

MASTER-LINE SCREWS MODEL SC-5.5.D10 - MASTER-LINE SCREW COMPRESSORS

Suction capacity 125 to 1400 m³/h; Vacuum to 33 mbar abs.; Discharge pressure to 2.0 bar abs. The NASH 2BM1 magnetic drive pump series is capable of achieving volume flow rates of 125 to 1400 m³/h and vacuum of 33 mbar abs. Non-contact torque transmission is achieved by using a permanent magnetic drive system. The pump's inner working space is hermetically sealed from atmospheric conditions, eliminating any possibility of leakage. This seal is essential for demanding applications, such as processes that are required to meet the most stringent standards on environmental compatibility. ATEX applications are also possible, certifications are available.

Available in both cast iron and stainless steel construction, the 2AV2 family provides up the 600 m³/hr (360 CFM) in a compact design, while giving you the flexibility of choosing the right motor for your needs. The pedestal design of the 2AV2 provides the benefit of flange mounting the motor to a self-supporting pump. No coupling guards, base plates or cumbersome shaft alignment is needed. The 2AV2 is an ideal choice when you need a compact and economical pump for an explosion proof or severe duty application. We focused on durability and dependability when we developed these liquid-ring pumps. With a reinforced stainless steel shaft and sealed bearings, the 2AV2 can provide up to 20,000 hours of maintenance-free operation. The 2AV2 is expertly designed and manufactured to be quiet and vibration free. With sound pressure levels of less that 75 dBA, it complies with the strictest noise standards, eliminating the need for additional sound attenuating devices. Advantages at a glance Compact Rugged design for reliable operation and long service life Precision-balanced rotor Suitable for NEMA C flange motor frames Low installation costs Easy to service Standard mechanical seal Main Applications Plastics Industry Chemical Industry Medical Technology Food and Beverage Industry General Industry

MASTER-LINE SCREWS MODEL SC-11.D10 - MASTER-LINE SCREW COMPRESSORS

15 - 140 CFM / 35 to 210 m³/h Designed from the ground up to meet the widespread needs of the process industry, the Vectra SX adds five models to Nash’s Vectra series in the 1 ½ to 10 HP range at 60 Hz (0.75 to 5.5 kW at 50 Hz), providing the right solution for small capacity vacuum pump requirements. Designed to use less energy and consume less operating liquid than competitive models, it is possible to save the user as much as 40% on power consumption and 50% on water usage.

MASTER-LINE SCREWS MODEL SC-37.D10 - MASTER-LINE SCREW COMPRESSORS

MASTER-LINE SCREWS MODEL SC-22.D10 - MASTER-LINE SCREW COMPRESSORS

Ac-pumps - AC 0207 Rated Pressure:0.7 bar Rated Airflow:3.5 l/min Rated Voltage:230 V 120 V Maximum Pressure:1.0 bar Power Consumption:25 W 20 W Rated Frequency:50 Hz 60 Hz Life Expectancy:3.000 h Outlet:4.7mm O.D. hose nipple Duty Cycle:Continuous Coil Insulation Class:E or its equivalent (JETL) and B for UL-1450 Mounting Dimensions (L x W):75 x 88 mm Gross Weight:1.7 kg Leadwire Length:200 mm

Medo Air Blower - LA-80B Power Supply:230 V 120 V Rated Frequency:50 Hz 60 Hz Rated Pressure:0.15 bar Operating Power Range:0,05 - 0,2 bar Airflow at Rated Pressure:80 l/min Power Consumption:86 W 86 W Weight:5.3 kg

1500 - 19000 CFM / 2,500 to 33,000 m³/hr Nash's 2BE3 & 2BE4 vacuum pump series offers capacities ranging from 1,500 to 19,000 CFM (2,500 to 33,000 m³/hr). Designed to operate in demanding environments like the paper, power, mining and chemical process industries, these pumps offer durability and reliability at a low cost of operation. Each model is equipped with an application-proven polyisoprene-lined body for added corrosion & erosion resistance. The unique inlet configuration allows for both top and side inlet arrangements to accommodate low headroom installations. In installations where space is limited, the top discharge capability of the 2BE4 allows the use of a top mounted discharge separator that saves floor space and eliminates the need for a trench. The pumps allow efficient operation over the entire vacuum range without the need to change the pump's internals. When equipped with a center shroud, split vacuum operation up to 12 in. Hg (400 millibar) differential can be achieved. Large inspection ports allow easy access to pump internals for inspection and maintenance. For more aggressive applications, stainless steel, stainless steel clad and epoxy coated components are available.

High capacity monoblock pumps Available in both cast iron and stainless steel construction, the 2BV5 family provides up the 600 m³/hr (360 CFM) in a compact monoblock design. Space-saving installation When compared to conventional pumps, the 2BV5's monoblock design delivers the benefits of a simple, compact and economical intallation. Since the pump and motor are integral and self supporting, there is no need for additional baseplates, couplings or guards, which add to the cost, complexity and overall size of the installation. Rugged and reliable We focused on durability and dependability when we developed these liquid-ring pumps. With a reinforced stainless steel shaft and sealed bearings, the 2BV5 can provide up to 20,000 hours of maintenance-free operation. Additional features such as the iron pump's ceramic coated casing prevent wear and ensure constant performance, even under harsh conditions. Quiet and precision balanced The 2BV5 is expertly designed and manufactured to be quiet and vibration free. With sound pressure levels of less that 75 dBA, it complies with the strictest noise standards, eliminating the need for additional sound attenuating devices.

Pumps & Compressors - VC 0101S (Dual) Attainable Vacuum:-240 mbar Rated Airflow:15 l/min Rated Voltage:230 V Maximum Pressure:0.26 bar Rated Pressure:0.05 bar Power Consumption:15 W Rated Frequency:50 Hz Life Expectancy:5.000 h Working Pressure Range:-240 mbar to 0.26 bar Outlet (Inlet):7.5mm O.D. hose nipple Duty Cycle:60 minutes Coil Insulation Class:B or its equivalent (JETL) Mounting Dimensions (L x W):66 x 100 mm Gross Weight:0.82 kg Leadwire Length:300 mm

3000 - 16000 CFM / 5,100 to 27,200 m³/h The NASH 904 , which replaced the popular NASH CL pump in the 1980's, can still be found at Gardner Denver Nash. Capacities of the 904 pumps range upward from about 3,000 CFM at vacuum. These durable pumps can handle excess liquid carryover without any difficulty, even if it arrives as massive slugs. 904 pumps are found in many industries including Paper, Chemical, and Mining. All 904 models are still available from Gardner Denver Nash, the original designer and manufacturer. Whether you have an existing 904 pump running in your plant that is in need of service, repair, or replacement with a new or remanufactured duplicate 904/905 pump, Gardner Denver Nash is there for all of the above.

MASTER-LINE SCREWS MODEL SC-11-500.D10 - MASTER-LINE SCREW COMPRESSORS

MASTER-LINE PISTON MODEL L-900-270.D10 - MASTER-LINE PISTON COMPRESSORS Voltage (*) V:400 Frequency (*) Hz:50 Motor KW:5,5 suction capacity/displacement l/min:900 Delivery performance at 8 bar/FAD 8 bar l/min:630 Max Pressure/Max pressure bar:10 power consumption/max. current A:11 Tank volume/tank size Liter:270 Weight kg:195 Sound emissions/noise level dBA:80

Ac-pumps - AC 0610 Rated Pressure:1.0 bar Rated Airflow:8 l/min Rated Voltage:230 V 120 V Maximum Pressure:1.5 bar Power Consumption:60 W 52 W Rated Frequency:50 Hz 60 Hz Life Expectancy:3.000 h Outlet:ISO Rc 1/4 female threaded Duty Cycle:Continuous Coil Insulation Class:E or its equivalent (JETL) and B for UL-1450 Mounting Dimensions (L x W):68 x 98 mm Gross Weight:3.2 kg Leadwire Length:270 mm or 200 mm