Produktai skirti duja (20)

Promix gas dosing stations for physical foaming have been specially designed and developed to meet the needs of foam extrusion. Promix gas metering technology is characterized by high dosing accuracy, reliability and amazingly simple operation. Promix gas dosing stations meet all the requirements of a modern gas metering system for foam extrusion. These include high-precision mass flow control, process visualization by means of trend charts, operator-definable operating limits, data acquisition, and synchronization of the dosing rate with the extruder output. Implementation in the extruder control system via fieldbus system is also possible. •,Mass flow from 1 g/h up to 20'000 g/h •,Dosing pressure up to 680 bar

ASCO’s innovative ASCOSORB CO2 Stack Gas Recovery Technology turns your vent flue gas into a usable and profitable source of CO2. CO2 gas won by an ASCO Stack Gas Recovery System is a byproduct of flue gas production from boilers as well as from other flue gas sources offering an economic CO2 source to any CO2 consumer or reseller. ASCO, as a provider of complete CO2 solutions, offers CO2 Stack Gas Recovery Systems with various capacities. Reliable CO2 source Reliable and economic source of CO2 to the end user as opposed to self burning processes or purchasing liquid CO2 Reduction in energy usage The ASCOSORB Technology brings to the ASCO CO2 Stack Gas Recovery Plant tremendous reduction in total energy usage offering greatly reduced OPEX only approx. 1.3 MWth / MT produced CO2

Assurez une livraison sûre et fiable du gaz naturel à l'équipement de votre centrale électrique grâce à notre gamme de skids de gaz, comprenant des débitmètres, des régulateurs de pression et d'autres composants

Der IST AG FS2 Strömungssensor wird zur Messung von Gasen eingesetzt und bietet eine hervorragende Langzeitstabilität. Zusätzlich zur Messung der Strömungsrate, kann der FS2 die Strömungsrichtung mit einer hervorragenden Empfindlichkeit feststellen. Weitere Vorteile des FS2 Strömungssensors sind: — Einfache Signalauswertung — Einfache Kalibrierung — Ungeschütztes Sensorelement widersteht bis zu +450 °C (kundenspezifisch) — Stabile Platin-Technologie — Exzellente Reproduzierbarkeit — Keine bewegten mechanischen Teile Der IST AG FS2 Strömungssensor eignet sich hervorragend für die Messung von Gasströmungen und deren Richtung.

Gasdruckfedern werden in Stanz- und Biegewerkzeugen meist dann eingesetzt, wenn es auf hohe Anfangskräfte, Langlebigkeit und Zuverlässigkeit ankommt. Getestete bis zu 5 Mio. Hübe zeichnen die STEINEL Gasdruckfeder als extrem langlebig und zuverlässig aus. Mit Durchmessern von 19 bis 120 mm, Einbauhöhen von 25 bis 330 mm und Federkräften von bis zu 10.000 daN bietet STEINEL ein enorm breites Standardsortiment an Gasdruckfedern an

Advanced Nova Swiss technology allows high-precision gas mixing under controlled pressure. The servo motor ensures state-of-the-art pressure regulation that is optimal for the respective application. This results in maximum precision for the injection process and ensures exact gas metering at the required pressure. Benefits : High flow rates Maximum pressure precision Low maintenance costs No daily re-adjustment required Faster start-up after interruptions. Thereby less waste during the start-up process. No compressed air supply required. Contamination-free gases thanks to diaphragm technology. The Nova Swiss gas injection unit does not require compressed air, as it is the case with pneumatic amplifiers. The integrated lubrication unit allows the system to be operated at very low speed, which in turn enables the dimensioning of extremely small quantities.

Die Massedurchflussmesser der red-y compact 2 series zeichnen sich durch leistungsstarke Technologie, intelligente Funktionen und innovatives Design aus. Die neue Gerätegeneration der Durchflussmesser bringt dem Anwender hohe Flexibilität in der Anwendung: Kompaktes Design, Batteriebetrieb und Touchdisplay mit Hintergrundbeleuchtung. Touch Technologie:Unabhängiger Batteriebetrieb USB Schnittstelle:Hohe Genauigkeit & Dynamik Erweiterte Alarmfunktionen:MEMS Sensortechnologie

Wir bieten Ihnen Glasbänder in verschiedenen Breiten an. Glasseidenbänder - Breiten von 10 – 350 mm - Titerbereich von 2.8 – 272 tex - Endlos-Filament oder gesponnen - Zur Verstärkung, zur Isolation, als Hitze- und Brandschutz oder z.B. als widerstandsfähige Reibfläche und vieles mehr. Rovingbänder - Breiten von 10 - 350 mm - bis 1'200 tex und Flächengewichte bis 3'000 g/m2 - Zur Verstärkung in Kunststoffen für verschiedenste Anwendungen

ASCO CO2 Gas Revert Recovery Systems are engineered to efficiently recover the revert CO2 gas from ASCO Dry Ice Pellet and Block Machines which normally direct the revert (flash) gas to the atmosphere. When dry ice is produced the conversion rate from liquid CO2 to dry ice is approx. 4045 %. This means 5560 % is lost to the atmosphere. This conversation rate is a physical fact and therefore, unfortunately, not to change. With a CO2 Revert Recovery System, however, most of the CO2 can be recovered which leads to a final conversion rate of approx. 9095 %. This way, the dry ice production costs are reduced up to 50 %. Fully automatic:Automatic (PLC) operation Design:Heavy duty, compact and efficient design Installation:Packaged, prepiped and prewired for timely installation Capacities:300 kg/h - 2'000 kg/h revert CO2 gas (larger sizes available on request)

The ASCO CO2 Gas Purity Tester has been designed to measure the purity of CO2 up to 99.995 % in a quick, easy and reliable way. Essential for bottling plants, breweries, beverage manufacturers and industrial gas companies. The complete kit contains all equipment for a simple, safe and fast CO2 gas purity test and is complete with easy instructions (step by step pictures on a laminated A3 sheet). The ASCO CO2 Gas Purity Tester (stainless steel) can be used either wallmounted or free standing. ASCO CO2 Purity Tester pair of protective gloves protective glasses two plastic containers flexible hose

ASCO CO2 Gas Detectors are used to protect personnel wherever CO2 gas or dry ice is used in closed areas, for example during dry ice blasting or when producing dry ice. ASCO offers wallmounted solutions for area monitoring and portable devices for personal protection. ASCO CO2 Gas Detectors ensure continuous and automatic CO2 content measuring in the ambient air using infrared absorption measuring (NDIR). This technology is very troubleresistant to temperature variations or air draughts and therefore measures very accurately. The CO2 gas detectors are very simple to handle and all components are built splash proof. Detector AGS Material box:plastic (IP54) Detector AGS Voltage / Power supply / DC:9 - 32 VDC (12 – 32 VDC recommended), 2 A Detector AGS Max power consumption:approx. 2 W Detector AGS Relay preliminary alarm/alarm:below 2 A at 30 VDC or 250 VAC, SPDT Detector AGS Analog output signal:4 - 20 mA Sensor Material box:plastic (IP54) Sensor Gas entry:diffusion Sensor Measuring range:0 - 5 Vol. % CO2 (0 - 50.000 ppm) Sensor Accuracy:0.1 Vol. % CO 2 (+ - 100 ppm or + - 5%) Sensor Operating temperature:0 to +50 ° C Detector AGP Alarm settings:3 thresholds Detector AGP Alarm signals:audible, visual, vibrating Detector AGP Dimensions:98 x 50 x 42 mm (3.9 x 2.0 x 1.7 in) Detector AGP Weight:approx. 0.14 kg (0.3 lb) Detector AGP Material:plastic material (IP54) Detector AGP Operating conditions:0° - 50°C Detector AGP Warm up time:approx. 5 sec Detector AGP Resolution:1ppm; 0.01 vol% CO 2 Detector AGP Accuracy:±40ppm / ±3% reading Detector AGP Gas entry:diffusion Detector AGP Measuring range:0-5 vol% CO2 Detector AGP Calibration interval:1 year Detector AGP Calibration method:Nitrogen or ambient air

The IST AG FS7.4W gas flow sensor has been developed for applications with temperatures up to 400 °C. The design of the FS7.4W is based on the FS7 design which offers a symmetrical heater that enhances sensitivity. The FS7.4W flow sensor is applicable in gas and offers excellent long-term stability. The small thermal mass of the FS7.4W sensor provides a fast response time. Further advantages of the FS7.4W thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request The IST AG FS7.4W flow sensors are optimal for measuring gas flow in various flow applications.

The IST AG FS2 flow sensors are applicable in gas and offer excellent long-term stability. In addition to measuring flow rates, the FS2 gas flow sensor is able to detect flow direction with outstanding sensitivity. Further advantages of the FS2 thermal mass flow sensor include: — Simple signal processing — Simple calibration — Bare sensor resists up to +450 °C (customer specific) — Stable platinum technology — Excellent reproducibility — No moving mechanical parts — Customer-specific sensor available upon request The IST AG FS2 flow sensors are optimal for measuring gas flow and direction.

De la vente à l'installation, nous offrons des solutions complètes pour alimenter les véhicules à hydrogène. Nos stations de ravitaillement en hydrogène clé en main, à base de liquide ou de gaz, sont des systèmes modulaires, pré-testés (FAT) et prêts à être installés avant expédition, garantissant un temps de mise en service minimal. Construites et conçues selon les dernières avancées technologiques et les normes européennes, nos solutions incluent la certification CE, l'approbation MID et le protocole de ravitaillement SAE J2601.

Das IST AG SFS01 EvaKit bietet eine einfache Auswertung des SFS01 Gasflusssensors. Es verfügt über einen analogen und digitalen Ausgang (I2C) und ermöglicht eine schnelle und flexible Auswertung des SFS01 Sensors. Der I2C-Ausgang beinhaltet sowohl Rohwerte als auch kalibrierte Durchflusswerte von 0 bis +- 200 sccm. Weitere Vorteile des SFS01 EvaKit: — Hervorragende Messdynamik — Analoge Ausgabe des Rohsignals — Digitalausgang mit Rohsignal und vollständig kalibriertem Signal — Integrierter Strömungskanal mit pneumatischen Anschlüssen Technologie:digital Anwendung:für Flüssigkeiten, für Gas Weitere Eigenschaften:elektronisch

Fast and compact flow module, suitable for gas dosing systems, manifolds and analysers. Easy to integrate with compact design, factory calibration and pins for HW address setting This module is also available with different flow rate ranges: +/- 200 sccm: > request product now +/- 50 sccm: > request product now

The IST AG FS7 thermal mass flow sensors are the successors of the FS5 flow sensors and exhibit a symmetrical heater design and enhanced sensitivity. The FS7 flow sensor is applicable in gas and offer excellent long-term stability. The small thermal mass of the FS7 sensor provides a fast response time. Additionally, the standard FS7 sensor is also available with a housing which is easily implemented into various applications. Further advantages of the FS7 thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request. The IST AG FS7 flow sensors are optimal for measuring gas flow in various flow applications.

Dieses Modul ist auch mit verschiedenen Durchflussbereichen erhältlich: +/- 200 sccm: > Jetzt Produkt anfragen +/- 50 sccm: > Jetzt Produkt anfragen

For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. It has a plastic housing for fast mounting into a flow channel Technology:anemometric Applications:For measuring flow rates using a symmetrical heater design

The IST AG SFS01 EvaKit offers an easy evaluation of the SFS01 gas flow sensor. It has both analog and digital output (I2C) and allows a fast and flexible evaluation of the SFS01 sensor. The I2C output includes both raw values and calibrated flow values from 0 to +-200 sccm. Further advantages of the SFS01 EvaKit include: — Excellent measuring dynamics — Analog output of raw signal — Digital output with raw signal and fully calibrated signal — Integrated flow channel with pneumatic connections Technology:digital Applications:for liquids, for gas Other characteristics:electronic