Produktai skirti domestics (335)

SANHA®-Heat Connection set, vertical, for heat meter, with 3 ball valves - stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can therefore be used not only in residential buildings, but also in industrial, commercial and public buildings. They are used for the distribution of water and isolating and balancing flow in heating and cooling circuits. This means that they can be used for the connection of radiators, ventilation / air conditioning units, as well as wall, ceiling and floor heating / cooling systems. Venting, flushing and flow balancing are particularly important to ensure trouble free and optimum operation in floor, wall and ceiling heating and cooling systems. Connection set, vertical, for heat meter, with 3 ball valves, variable adaptor pipe 3/4" 110 mm (1" 130 mm), tee for sensor Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

Anschlussgarnitur horizontal für Wärmemengenzähler, mit 3 Kugelhähnen, Passrohr 3/4“ 110 mm (1“ 130 mm), T-Stück für Messfühler Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

Nominal volume: 660 L Nominal loading capacity: 270 Kg + manufactured by compact injection moulding process from high molecular weight, high-density polyethylene (HDPE) in accordance with the test + regulations of DIN EN 840 and RAL GZ 951/1 + resistant to frost, heat and chemicals; stabilised against UV radiation + standard emptying options of either DIN or comb-lifting device; optionally with Ochsner handles of zinc-plated steel + quiet-running, full rubber heavy-duty castors of 200 mm diameter, 360° swivel range + wheel stop brake system (dual stop) as standard feature; alternatively available with central braking system + zinc-plated, corrosion-resistant metal parts + frontal comb is equipped with a chipnest to accommodate data carriers in accordance with DIN 30745 and RAL GZ 951/1 + optimised for high stacking with strong stacking ribs + drain plug in the bottom facilitates cleaning + available colours: grey, blue, brown and green In accordance with DIN EN 840:Manufactured from HDPE Resistant to UV, frost, heat and chemicals:In many different colours With integrated chipnest:Please visit our website for many options

Nominal volume 180 L Nominal loading capacity 72 Kg + manufactured in accordance with the requirements of DIN EN 840 and RAL GZ 951/1 + produced by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised, extremely resistant to cold, heat and chemicals + stepped comb-lift for maximum safety during emptying + 200 mm diameter stable and smooth-running wheels; available with 250 mm diameter wheels + zinc-plated, corrosion-proof steel axle + available in standard colours of grey, green, blue and brown; additional colours available + ribbed chipnest for secure mounting of transponders/data carriers; compatible with the most widely-used identification and weighing systems + equipped with a centrally-located foot step at the rear for easier handling + strong ribs allow for high stacking + Weber wheelie bins can be fully recycled at the end of their useful life In accordance with DIN EN 840:Manufactured from HDPE Resistant to UV, frost, heat and chemicals:In many different colours With integrated chipnest:Please visit our website for many options

With our coupling for plastic pipes you can always rely on the right coupling in the water, gas, heating and local / district heating sector. Our couplings are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The coupling consists of only three components and thus enables quick and easy installation without special tools. The model is available in different versions. Pipe diameter: 12mm - 75mm Material:brass or CUPHIN Dimensions:for PE pipes diameter 12 - 75mm Application:cold and hot water up to 95°C Application:Gas up to 4 bar Application:heating/ district heating Lind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

Room thermostat AP, super flat, white, closed and currentless, with thermal recirculation Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

SANHA®-Heat Maximum supply flow limiter 60 °C, as contact thermostat with retaining strap fastening. Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

Nominal volume 1100 L Nominal loading capacity 440 kg + produced by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + stepped comb-lift for maximum safety during emptying; optional emptying by lifting trunnions reinforced with steel inserts + 200 mm diameter quiet-running, solid rubber castors with 360° swivel range + standard equipment features 2 x footbrakes; also available with central braking + with integrated chipnest in the frontal comb to accept transponders/data carriers, compatible with common weighing and ID systems + all metal parts are zinc plated and resistant to corrosion + well-positioned handles on body and lid for convenient handling from all sides + standard equipment includes 2-inch central water drain in the base with locking plug In accordance with DIN EN 840:Manufactured from HDPE Resistant to UV, frost, heat and chemicals:In many different colours With integrated chipnest:Please visit our website for many options

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 13mm - 50mm Thread sizes: 1/2" - 2" Material:brass or CUPHIN Dimensions:for PE pipes diameter 13 - 50mm Application:cold and hot water up to 95°C Application:Gas up to 4 bar Application:heating/ district heating Kind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

Nominal volume 360 L Nominal loading capacity 144 Kg + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 + resistant to UV, frost, heat and chemicals + emptied by stepped comb-lifting device (shape A), reinforced by additional ribs + equipped with two solid rubber maintenance-free 200 mm diameter wheels; also available with 300 mm diameter wheels + corrosion-protected steel axle, zinc-plated + with integrated chipnest in the frontal comb; accommodates transponders (RFID chips) compatible with the most widely used ID and weighing systems + available in standard colours of grey, green, blue and brown; additional colours available + strong ribs allow for high stacking + with raised edge to prevent water ingress (e.g. during rain) + meets the requirements of EC directive 2000/14 EC. In accordance with DIN EN 840:Manufactured from HDPE Resistant to UV, frost, heat and chemicals:In many different colours With integrated chipnest:Please visit our website for many options

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

Stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can therefore be used not only in residential buildings, but also in industrial, commercial and public buildings. They are used for the distribution of water and for isolating and balancing flow in heating and cooling circuits. This means that they can be used for the connection of radiators, ventilation / air conditioning units, as well as wall, ceiling and floor heating / cooling systems. Venting, flushing and flow balancing are particularly important to ensure trouble free and optimum operation in floor, wall and ceiling heating and cooling systems. The SANHA heating circuit distributors are equipped as standard with safety filling and ventilation device as well as integrated flow meters or control valves. This allows a reliable, fast and thus cost-efficient execution of these measures. Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

SANHA®-Heat Fastening set for wall heating modules for wooden walls Operating pressure:Max. 10 bar Operating temperature:16 °C - 60 °C

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865 Height:1,40m - 1,60m Material:Stainless steel

Plug-in connector for drinking water, water and gas. The material-friendly connecting technique enables that the pipe is only stressed as the relations of pression and torsion demand. Premature wear due to overstressing of material and subsequent troublescan be excluded. The metal clamping claw enables a torsion-free assembly by its positioning. The connector can easiliy be dismounted – all components can be reused without problems. For the application in the field of gas the connector has an additional insert pipe to stabilise the pipe. For the application in the field of drinking water the connector has the proven EPDM profile gasket which reliably seals minor damages on the surface. The plug-in connectors for the application in the fields of water and gas additionally have a special o-ring. The sealing and clamping functions are separated and independent which makes the connector extraordinarily safe. Material:brass or lead-free brass Dimensions:for PE pipes diameter 25-63mm Application:Cold and warm water up to 40°C Application:Gas (with support tube) for pipes:PE80, PE100, PE-Xa, PVC

SANHA®-Heat Distribution cabinet, surface-mounted, galvanically zinc-coated steel sheet, painted white (RAL 9010), with removable door and locking bolt, installation depth 125 mm. Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

Nominal volume: 660 l Nominal payload: 270 kg + Weber large waste bins / waste containers made of polyethylene (HDPE) in a compact injection molding process in accordance with EN 840-2 + lid with easy-to-open insert lid (LIL, lid in lid), making the waste bins particularly user-friendly + resistant to UV, frost, heat and chemicals + all metal parts of the wheelie bins are corrosion-resistant thanks to galvanic zinc plating + waste container with an integrated chip nest in the front mount for holding a transponder + conforms to the requirements of Directive 2000/14 / EC. The waste bin is CE-marked and has a guaranteed sound power level + optionally with lateral mounting pins + standard colours grey, green, blue and brown - other colors are optional! + please visit our website for more information on additional options, spare parts, etc. In accordance with DIN EN 840:Manufactured from HDPE Resistant to UV, frost, heat and chemicals:In many different colours With integrated chipnest:Please visit our website for many options

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

Nominal volume 1100 L Nominal loading capacity 144 Kg + manufactured in accordance with the regulations of DIN EN 840 (Parts 3, 5 and 6) and RAL GZ 951/1 + are suitable for both DIN and comb-lifting devices (form A in accordance with EN 840-3) + easy-to-move, spring-supported sliding lid, lockable in three positions + high-quality high-density polyethylene (HDPE) + UV stabilised, resistant to frost, heat and chemicals + 200 mm diameter quiet-running, solid rubber heavy-duty castors, 360° swivel range + available with wheel stop/double stop or central braking system + corrosion-resistant metal parts + the lid is attached to the body with high-strength polyamide hinges. Corrosion-protected metal springs keep the lid closed + can be easily moved from all sides by using the four lateral handles on the body + the waste bin features a standard water drain (2 inch water drainage hole) + available in all usual colours and combinations (e.g. grey, blue, brown or green) In accordance with DIN EN 840:Manufactured from HDPE Resistant to UV, frost, heat and chemicals:In many different colours With integrated chipnest:Please visit our website for many options

With our fl exible all-rounder you can rely on water, gas, heating and district heating always on the right angle piece. Our elbow handpieces are suitable for drinking water hygiene Material manufactured and are therefore optmal for use in the drinking water sector. Our elbow handpieces are made of thermally relaxed brass. All drinking water-contacting components consist of high quality UBA compliant material. The material is hygienically hygienic suitable and complies with the legal requirements (Drinking Water Ordinance, UBA list). The reliable one brass material ensures a special longevity. The model is available in different versions. Pipe diameter: 16mm - 75mm Thread sizes: 3/8 "- 2 1/2" Material:brass or CUPHIN Dimensions:for PE pipes diameter 16 - 75mm Application:cold and hot water up to 95°C Application:heating/ district heating Kind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 110mm Thread sizes: 1 1/2" - 3" Material:brass or CUPHIN Dimensions:for PE pipes diameter 63 - 110mm Applications:cold and hot water up to 95°C Kind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

Nominal volume: 80 L Nominal loading capacity: 40 Kg + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, insensitive to temperature variations and chemicals + stepped comb-lift, reinforced with ribs, for maximum safety when emptying the waste bins + very stable; fitted with 200 mm diameter solid, quiet-running rubber wheels + corrosion-resistant, zinc-plated steel axle + lid with drip edges minimises the escape of condensation water + the waste bins are available in standard colours grey, green and brown; additional colours available + with chipnest in the frontal comb to accommodate transponders (RFID chips), + compatible with the most widely-used ID and weighing systems + complies with the noise control regulation in accordance with EC directive 2000/14/EC and is marked with the appropriate noise level In accordance with DIN EN 840:Manufactured from HDPE Resistant to UV, frost, heat and chemicals:In many different colours With integrated chipnest:Please visit our website for many options

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 75mm Thread sizes: 2 1/2" - 3" Material:brass or CUPHIN Dimensions:for PE pipes diameter 63 - 75mm Application:Drinking water Application:cold and hot water up to 95°C Kind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

With our fl exible all-rounder you can rely on water, gas, heating and district heating always on the right angle piece. Our elbow handpieces are suitable for drinking water hygiene Material manufactured and are therefore optmal for use in the drinking water sector. Our elbow handpieces are made of thermally relaxed brass. All drinking water-contacting components consist of high quality UBA compliant material. The material is hygienically hygienic suitable and complies with the legal requirements (Drinking Water Ordinance, UBA list). The reliable one brass material ensures a special longevity. The model is available in different versions. Pipe diameter: 20mm - 75mm Thread sizes: 1/2 "- 2 1/2" Material:brass or CUPHIN Dimensions:for PE pipes diameter 20 - 75mm Application:cold and hot water up to 95°C Application:Gas up to 4 bar Application:heating/ district heating Kind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

— brackets are equipped with cross slots to guarantee an ideal adjustment of the installation set — Length compensation fittings to find the optimum position of the water meter — Screw connections with roughened external thread for even more tightness QUICKTURN piston valves — easy operation by ergonomically shaped handles — fast operation with just a few turns from "open" to "closed" — Direction of rotation indication on the handle — The label on the handle allows the clear line marking — non-rising top — Dead space top — Functional parts of the piston valve maintenance-free and permanently lubricated — Deposition-resistant sealing piston by special profile All materials meet the requirements of the Federal Environmental Agency and are approved for drinking water. Bracket material:stainless steel (material 1.4301) Fitting material:brass or lead-free brass

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 110mm Thread sizes: 2" - 4" Material:brass or CUPHIN Dimensions:for PE pipes diameter 63 - 110mm Application:drinking water Application:cold and hot water up to 95°C Kind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

SANHA®-Heat Distribution cabinet, surface-mounted, with galvanised installation frame, painted white (RAL 9010) front panel, with removable door and locking bolt, installation depth 110-150 mm. Operating pressure:Max. 4,0 bar Operating temperature:-10 °C - 80 °C

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 13mm - 50mm Thread sizes: 1/2" - 2" Material:brass or CUPHIN Dimensions:for PE pipes diameter 16 - 75mm Application:cold and hot water up to 95°C Application:Gas up to 4 bar Application:heating/ district heating Kind of pipes:PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP

Ready-to-install wall heating module with integrated heating register, 25 mm thick, 625 mm wide