Produktai skirti diržas (421)

Zaciski łączące są używane do łączenia taśmy podczas montażu oraz do przeprowadzania szybkich drobnych napraw taśmy. Są one dostępne w wersjach pojedynczych i potrójnych. Jeśli potrzebne są zaciski łączące, należy je zamówić jednocześnie z zamówieniem taśmy. Zaciski łączące są używane do łączenia taśmy podczas montażu oraz do przeprowadzania szybkich drobnych napraw taśmy. Są one dostępne w wersjach pojedynczych i potrójnych. Jeśli potrzebne są zaciski łączące, należy je zamówić jednocześnie z zamówieniem taśmy.

Unsere gurtspezifischen Verbindungsclips können sowohl zum einfachen Verbinden als auch für kleinere Reparaturen am Band verwendet werden. Sie sind erhältlich als Ein-Maschenclips und Drei-Maschenclips. Sollten Sie Clips benötigen, geben Sie dies bitte im Auftrag entsprechend mit an. Stabgeflecht:Ein-Maschenclip Stabgeflecht:Drei-Maschenclip

Telescopic actuator with a synchronized toothed belt system for effective linear movement and minimal overall dimensions. The wall-mounted system feeds the machine and retracts, facilitating the feeding of machine tools where obstructions to protective doors must be avoided. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information. Compact and space saving thanks to 3 or 4 stages solutions: Compact and space saving thanks to 3 or 4 stages solutions Wall mounted configuration allows higher stiffness for heavy loads:Wall mounted configuration allows higher stiffness for heavy loads High dynamics thank to the multiplication of speed of each level:High dynamics thank to the multiplication of speed of each level Vertical linear axes can be mounted on the end carriage:Vertical linear axes can be mounted on the end carriage Light and stiff aluminum beams allow higher dynamics:Light and stiff aluminum beams allow higher dynamics

Wire Belt oferuje szereg prostych przenośników taśmowych zaprojektowanych w celu zapewnienia wydajnej pracy, dłuższej żywotności taśmy i maksymalnej możliwość czyszczenia. Charakteryzują się otwartą konstrukcją z taśmą podpartą na paskach ścieralnych z niebieskiego polietylenu o wysokiej gęstości przymocowanych do ramy ze stali nierdzewnej.Wszystkie nasze przenośniki taśmowe nadają się do stosowania w obszarach wymagających wysokiej higieny, szczególnie w przemyśle spożywczym i farmaceutycznym. dostępne kąty:90°/180°

Bande modulaire en plastique, convoyeur à bande modulaire, série 10 - Trajets linéaires, pas 25,4 mm (1 po)Bandes pour marchandises de poids léger à moyen, dans des applications exigeant des normes d'hygiène strictes Caractéristiques de conception : - quantité minimale d'œillets pour faciliter le nettoyage - large ouverture des charnières, canaux larges et lisses sur la face inférieure et traverse continue pour un nettoyage facile de la bande - version robuste pour durée de vie étendue Accessoires : - Roues dentées de diverses tailles avec logement d'essieu rond ou carré - Profilés de différentes hauteurs et versions pour le convoyage ascendant - Plaques latérales de hauteurs différentes pour l'alimentation en produits en vrac - Hold Down Tabs -Hold Down Tabs pour guidage supplémentaire

Propriétés du module racleur de bande : - adapté aux racleurs de bande en uréthane et polyester - construction robuste et compacte - puissance de presse régulière, réglable - angle réglable du racleur Les modules racleurs de bande conviennent à des largeurs de bande comprises entre 300 et 1500 mm (largeurs personnalisées sur demande)

Tuleje łączące można wykorzystać do stworzenia hybrydowego połączenia między pełnym cięgnem kształtowym, a zaciskami łączącymi. Pojedyncze cięgno cięte jest na mniejsze pojedyncze ogniwa, które wplatane są w taśmę i łączone poprzez zaciskanie rurek ze stali nierdzewnej na sąsiadujących odcinkach drutu. Metoda ta pozwala na utrzymanie wytrzymałość taśmy, jednocześnie eliminując zniekształcenia występujące w procesie przetykania. Podczas używania rurek łączących w branży spożywczej należy przestrzegać obowiązujących przepisów higienicznych. materiał:stainless steel

Verbindungshülsen versprechen mühelose und schnelle Installation Ihres Gurtes. Sie sind für alle Flat-Flex® Spezifikationen erhältlich. Bei Rückfragen zur Verwendung von Verbindungshülsen, wenden Sie sich jederzeit gerne an unseren Kundenservice. Material:Edelstahl

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of... Available sizes for linear actuators:ONE 50, ONE 80, ONE 110 Product specifically designed for automation solutions in clean rooms up to class ISO1 (DIN EN ISO 1:Product specifically designed for automation solutions in clean rooms up to class ISO1 (DIN EN ISO 1 Made of low particle emission materials.:Made of low particle emission materials. Uses special lubricants for "clean rooms".:Uses special lubricants for "clean rooms". Max. speed:5 m/s Max. acceleration:50 m/s2 Repeat accuracy:0,05 mm Max. static load:Fx 4410 N, Fy 79.000 N, Fz 79.000 N Max. static moment:Mx 1.300 Nm, My 7.110 Nm, Mz 7.110 Nm High dynamics:V=7m/s, A=20m/s

Wire Belt’s innovative line of Clean-Sweep™ sprockets are specifically designed to deflect the amount of product buildup accumulated on your conveyor’s drive. This means that there is less of a chance for product loss & carryout, belt skipping due to product buildup, and belt breakage due to incorrect contact with the sprocket teeth. Clean-Sweep™ sprocket’s tooth chamfer is machined to reduce drive friction and can lengthen belt life.

Telescopic actuator with a synchronized toothed belt system for effective linear movement and minimal overall dimensions. The compactness of the closed system makes it ideal for environments without much space between the machine and the ceiling. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information. Compact and space saving thanks to 3 or 4 stages solutions: Compact and space saving thanks to 3 or 4 stages solutions High dynamics thank to the multiplication of speed of each level:High dynamics thank to the multiplication of speed of each level It can be part of multiple axes configurations: It can be part of multiple axes configurations

Wire Belt introduces our line of PEEK drive components. PEEK is an abbreviation for PolyEtherEther-Ketone, a high performance engineering thermoplastic that can operate at high temperatures and is less abrasive on your stainless steel belts than metal drive components. PEEK can be used continuously to 250°C and in hot water or steam without permanent loss in physical properties. Our PEEK line is available for all drive components including: sprockets, blanks and end rollers. Tensile strength (N/mm²):100 Heat deflection temperature (ºC):152 Continuous service temperature in air (ºC, min-max):-50 - 240 Melting point (ºC):343

Flex-Turn® curved systems offer a hygienic solution for product transport without changing alignment or spacing. They minimise the risk of product damage and are ideal for sensitive goods, especially in the food industry. Hygiene and protection: . easy to clean: Open stainless steel frame (600 series) and solid polythene surfaces (700 and 800 series). . Robust materials: Made of stainless steel and UHMW-PE for intensive cleaning. Advantages: . Gentle handling: Reduces product damage. . Consistent alignment: Products retain their position and spacing. . Compact design: Ideal for tight production spaces. . High-quality construction: Adjustable height, lockable castors. . Flexible speeds: Up to 11 m/minute. Flex-Turn® curve conveyors are available in various sizes, radii and configurations to suit almost any application. belt width (mm):254 - 1270 Inside radius(mm):406/800/812 Available angles (mm):45° to 90°/180°

Wire Belt offers a range of straight conveyors designed to ensure efficient operation, improved belt life and maximum cleaning ability. Our straight conveyors feature an open construction with the belt being supported on food grade high density blue polyethylene wear strips clipped to the stainless steel framework. All of our conveyors are suitable for use in hygiene-sensitive environments common to the food and pharmaceutical industries. Available angles (mm):90°/180°

Wether packaging, food items or other piece goods – surfaces will become disinfected by UV technology in a gentle and efficient way. Several UV-C tubes destroy microorganisms, so that it is no longer possible for them to reproduce.

Flush-grid belt conveyors should be selected particularly for high output. They are easy to assemble and replace

The availability and output of a production system is only as high as the process reliability of its feeding systems allows. Thanks to more than 35 years of experience as a system supplier for assembly technology and custom machines, we can implement a large variety of applications tailored to customers' requirements;

Their slip resistance makes belt bands especially suitable for small-scale and bulky products such as bags.

Universalholster für diverse Barcode Scanner von Zebra, Honeywell und Casio. Das Holster kommt mit einem längenverstellbaren Hüftgurt, Stifttaschen und einem kleinen Reißverschlussfach an der Seite. Stoff:Polyester Geeignet für:Paketboten, Briefträger

The availability and output of a production system is only as high as the process reliability of its feeding systems allows. Thanks to more than 35 years of experience as a system supplier for assembly technology and custom machines, we can implement a large variety of applications tailored to customers' requirements;

FDA white rubber elevator belts are anti-static. The plies are polyester interwoven with nylon layers. The belt is made out of FDA white rubber, according to ISO284.

SBR elevator belts are anti-static. The plies are polyester interwoven with nylon layers. The belt is made out of SBR (Styrene Butadiene Rubber).

NBR-ACN elevator belts are anti-static. The plies are polyester interwoven with nylon layers. The belt is made out of NBR, (Nitrile Butadiene Rubber) with a high content of ACN (ACryl-Nitril). The covers make it possible that the elevator bolt head will fit and countersunk perfectly. These belts are available in several breaking loads and thicknesses. NBR (Nitrile Butadiene Rubber) with a high content of Acryl-Nitril covers are suitable for transporting products with a higher fat, oil and acid content. Often used in feedmill industry where hot oil products and molasses are processed. Belts are cut and punched according to customers specifications.

PVC-white- elevator belts are anti-static. This belt is fulley synthetic and suitable for the food industry according to FDA-EU standards.

02.2216.05 - Riemenkrampe - schwarz

05.0501.43 - Nietunterlagen rund - Riemenmaterial schwarz

Abnehmbarer Schultergurt für Transporttaschen nach Maß. Breite 40mm, Material gewebtes Gurtband (Autogurt) Material:gewebtes Gurtband

FTW Scharnierbandförderer für Stanzautomaten, Pressen, Druckgusszellen, Schneidautomaten u. v. w. Anlagen für schwere, scharfkantige oder heiße Werkstücke in vielen Abmessungen

02.2011.01 - Kleine Riemenkrampe - verzinkt

Bechtel also delivers the belt fasteners for installing your elevator belt. Available in different kinds of fasteners (normal, speedy or belt clamps) for all kinds of elevator belting. Model A&B Model Speedy Model 1,2,3