Produktai skirti 120 (3)

Elastotex 120 Cloth Waterproof butt strap, consisting of a expandable elastomeric rubber, entirely coated on both sides with absorbent fabric, with an overall width of 12 cm. The product is distinctive for its simple and easy application, the ascertained watertightness to water and the high deformation capacity. Unlike Elastotex 120, where the elastic part is represented exclusively by the central part of the product (8 cm wide), the entire width of Elastotex 120 Cloth consists of an elastomeric material (12 cm), allowing a greater maximum expansion and adaptation to structural movements. In addition, the entire width of the band is lined with absorbent fabric, so it can be impregnated on a more extended portion of its surface, ensuring superior adhesion to the support. Connection of waterproofing surfaces adjacent to joints in structures or artefacts subject to thermal or dynamic movements, particularly suitable in waterproofing coating interventions that interweave the use of Osmocem Flex or Osmocem D. The application surfaces should be clean, free of incrustations, dust and non-adhering parts, carefully roughened. Previously apply Osmocem Flex or Osmocem D on the laying surfaces (with a layer of average thickness not less than 2 mm), for a width greater than that of the Elastotex 120 Cloth butt. Lay the strap and press it appropriately in the prepared osmotic mortar, ensuring the incorporation of the latter (for the whole width of the strap) in the fabric that covers it. Complete the coating with Osmocem Flex or Osmocem D. 1.1 m/m: 1 metre of Elastotex 120 Cloth for each linear metre, being careful to overlap the rolls of approximately 5-10 cm in correspondence with the edges of the band to guarantee the permanent water tightness of the system. Packaging: Roll of 30 meters UM: €/m

Porta in lamiera spessore mm. 60 tamburata, coibentata, come da relativa certificazione, con cerniere invisibili su cuscinetti a sfera. Semiautomatica con ammortizzatore e sistema di richiusura a molla. Finitura in antiruggine RAL 7001. PARAFIAMMA 120".

Porta in lamiera spessore mm. 51 tamburata, coibentata, come da relativa certificazione, con cerniere invisibili su cuscinetti a sfera. Semiautomatica con ammortizzatore e sistema di richiusura a molla. Finitura in antiruggine RAL 7001. PARAFIAMMA 120" CON FINESTRA mm 100x600