Produktai skirti wangzhi asxzq cn (8)

Automatic Drum Cabinet

Battery Cycle Count A typical cell phone battery goes through approximately 500 cycles before retaining at least 80% of its original capacity. Made from new materials, our batteries have zero cycles, ensuring the maximum number of cycles you can use. Zero Cycle Count, so you have the maximum amount of cycles remaining. Lithium-Ion Polymer technological materials Strict QC test Less than 1% failure rate 12 Months Warranty

AG crystals are ultra-miniature SMD components specifically designed to provide 32.768kHz for real-time clocks. Their ultra-small size and rugged construction make them suitable for a wide range of applications including battery powered, hand-held equipment and any application requiring miniaturization Frequency 32.7680kHz (also 75kHz) Ultra-miniature size 7.0 x 1.5 x 1.4mm SMD Low mass and rugged construction Supplied taped and reeled Suitable for a wide range of real-time clock applications Nominal Frequency:32.7680kHz and 75.0kHz Calibration Tolerance:±20ppm of ±50ppm (standard) Load Capacitance:12.5pF standard or 7pF Equivalent Series Resistance 32.768kHz:65kΩ maximum 75.0kHz:30kΩ maximum Drive Level:1.0µW max, 0.5µW operating Parabolic Coefficient:-0.04ppm/°C2 maximum Peak Temperature:+25°C Shunt Capacitance (C0):0.8pF typical Motional Capacitance (C1):1.9fF typical Ageing:±3ppm /year max. at +25°C Insulation Resistance:500MΩ min. @100VDC Crystal Cut:X-Cut Operating Temperature Range:-40° to +85°C Storage Temperature Range:55°C to +125°C Reflow Soldering:10s max. @+260°C twice or <230°C for 3 minutes RoHS Status:RoHS Compliant, pB free Packaging:16mm EIA tape and reel 3000 pieces per reel

We provide ventilation with our own production of snail fans using polypropylene material. 2) DETAILS General Features: We provide ventilation with our own production snail fans using polypropylene material. Technical Specifications: Areas of Use:

96SMF and 98SMF, SMD 6 x 3.5mm, ultra-low profile, Monolithic Crystal Filter

A HC49 crystal with formed leads and clip for SMD application. Available in fundamental and 3rd, 5th 7th and 9th overtones. Close tolerances and specifications available. Low-cost, industry-standard crystal unit formed for SMD Available with close tolerances Frequency range 1.0MHz to 200MHz Specifications fully customisable Frequency Range:1.0MHz to 200MHz SL-Cut (<1.3MHz):from ±100ppm -10° to +60°C AT-Cut (>1.3MHz): from ±3ppm 0° to +50°C Shunt Capacitance (C0):4pF typical, 7pF maximum Load Capacitance (CL):Series or from 8pF to 32pF (Customer specified CL) Ageing:±3ppm maximum, 1st year, ±1ppm per year thereafter Drive Level:100µW typical., 500µW max Crystal Holder:Resistance-weld hermetic seal Supply format:Bulk pack or 'Ammo Pak' tape

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. LVDS 'F' Group characteristics. RoHS Compliant. TCXO with LVDS output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. Miniature 7 x 5 x 2.8mm ceramic SMD package Supply voltage 3.3 Volts Low cost, low jitter for general applications RoHS compliant 'F' Group characteristics. Frequency Range 38.880MHz to 432.0MHz. Product Series Code TCXO:EMF576D VCTCXO: VEMF576D Frequency Range:12.0MHz to 800.0MHz Output Waveform:LVDS Initial Calibration Tolerance:<±2.0ppm at +25°±2°C Standard Frequencies:(Partial list) 12.8, 16.0 19.44, 20.0, 25.0, 27.0, 30.0, 32.0 Frequency Stability (see table) vs. Ageing:±1.0 ppm max. first year vs. Voltage Change: ±0.3 ppm max. ±5% change Supply Voltage:+3.3 Volts Differential Output Voltage VOD:247mV min., 355mV typical; 454mV max., Output 1 - Output 2 Differential Output Error dVOD:-50mV min., 50mV max. Output Offset Voltage VOS:1.125V min., 1.200V typ., 1.375V max Offset Magnitude Error dVOS:0mV min., 3.0mV typ., 25mV max Rise and Fall Times:1.5ns typical Duty Cycle:50%±5% Start-up Time:5ms typical, 10ms max. Current Consumption:12MHz to 24MHz: <33mA max., 24MHz to 96MHz: <50mA max., 96MHz to 800MHz:<85mA max Output Load:50W from each load Drive Capability:100W between LVDS and Complementary LVDS Storage Temperature:-55° to +125°C Phase Jitter (RMS) (12kHz to 20MHz):0.4ps typ., 0.5ps max

Tape and reel specification for all CXSM SMD crystals.