Produktai skirti vb6 į c keitiklį (31)

Wire transducers series WPS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and two availble strokes: 2300 or 5000 mm. The housing is out of glass fiber reinforced nylon, whilst the wire consists of coated poliamide stainless steel. Strokes range:2300, 5000 mm Housing:Glass fiber reinforced nylon Wire:Coated poliamide stainless steel

für Schaltschrankeinbau Ausgang:0…10 V, 0…5 V, ±5 V, ±10 V, 4…20 mA, 0…20 mA Funktionen:Kabelbrucherkennung, Alarmausgang Einstellbarkeit:Offset, Verstärkung, Frequenz, Amplitude, Phasenkompensation Grenzfrequenz:300 Hz, optional 1 kHz Montageart:DIN-Schiene

Our enclosed module featuring an internal power supply and printhead driver board, enables communication between the DOD printhead technology and the MPERIA controller through an Ethernet connection. V-Links can be stacked and networked through MPERIA®, providing a flexible and scalable system for small or very large applications.

Type: BKO-NC6800 H51 PRE-AMP MHE 90K z.B. für Mazak Multiplex Type:BKO-NC6800 H51 Artikelnummer:5158530 AUSTAUSCHARTIKEL:Ja

dryve motor control system - select, click, control... Travel distances, positions, speeds, operating times - easily defined with the new igus® web-based control system for drylin® E linear systems. - No software or app installation necessary, fast commissioning - Control possible via smartphone (browser), tablet or laptop - Simple and intuitive user interface, control system set up in just a few minutes - Compatible with numerous industrial controllers (e.g. Siemens S7/Beckhoff) - For DC, EC and stepper motors - Cost-effective Protection class:IP30 Motor type:Two-phase stepper motor bipolar (ST), direct current motor (DC), electronically commutated motor EC

V.24/RS232C Übertrager mit ext. Versorgung

Das SYS TEC USB CAN Interface - USB-CANmodul2 ist eine galvanisch getrennte CAN Schnittstelle zum Anschluss von 2 high/low-speed CAN Kanälen über USB an einem PC.

Anbindung eines CAN FD-Netzwerkes an USB 2.0

Mobiles USB Messmodule mit integrierten Signalverstärkern im stabilen ALU Gehäuse mit Kunststoff-Stoßschutzkanten. • 8 analoge Messkanäle • Steckplätze für 5B Signalverstärker • Auflösung 16Bit • 250kHz Summenabtastrate • 4 digitale Eingänge, optoentkoppelt • 4 digitale Ausgänge, optoentkoppelt Die USB Analog IO Boxen sind mit den unterschiedlichsten Anschlussbuchsen lieferbar. Die integrierbaren Signalverstärker aus der 5B Moduls Serie sorgen für die galvanische Trennung der angeschlossenen Sensoren. Als USB Messkarte integrieren wir Produkte von BMC Messsysteme, Goldammer und National Instruments. So ist sichergestellt, dass unsere Lösungen ein Höchstmaß an Kompatibilität zu der von unseren Kunden verwendeten Software bieten.

vCPU 1 RAM 1 GB SSD 20 GB IPv4 OpenVPN

The decentralized module µCAN.4.ao-BOX features four analogue outputs which optionally provide a voltage signal (+/- 10 V) or a current signal (0…20 mA). The CAN interface supports the protocols protocols CANopen and J1939. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz:Signal type freely configurable Fieldbus CAN:Protocol CANopen / Raw CAN / J1939

The Industryline Extender over IP is the reliable and robust solution for 24/7 operation in industry. Power, Ground and Shield are separated. The Industriyline Extender can be operated directly in 24 Volt networks and has a range of 150m / 492 ft. at a resolution of 1920x1200 @60Hz and is available in copper as single version. The perfect tuning of kvm-tec video compression with a low latency allows a delay-free transmission of the signals. USB and video is transmitted via CAT5e/6/7 cable. With DVI extension without loss of quality, Full HD videos can be transmitted in real time. The transparent USB 2.0 interface already supports tablets and touch screens, sound modules, printers and much more in the standard version. The USB upgrade is available for memory sticks and USB hard drives. High reliability and robust design make the kvm-tec extender ideal for many industrial applications.

4-channel universal amplifier Scanning rate 20 kHz with 24 bit Supports more than 12 sensor types Ethernet, CAN

Inspection and testing devices from HEIDENHAIN HEIDENHAIN encoders provide all of the information needed for commissioning, monitoring, and diagnostics. For the analysis of these encoders, HEIDENHAIN offers the appropriate PWM inspection devices and PWT testing units. The PWM inspection devices, which are universally deployable, feature calibration capability and low measuring tolerances. Testing devices such as the PWT 101 provide fewer functions, have wider tolerances, and cannot be calibrated

The IP Redundancy / Converter connects WEYTEC products and third party devices that (only) have a single network interface to two different switches within the network. This opens up a wealth of possibilities to configure redundancy and increase operational availability. The IP Redundancy / Converter provides full flexibility to deploy both copper and fiber within the same solution. At a glance Redundancy for devices with single network interfaces Media converter between copper and fiber infrastructure Fully compatible and integrated with WEYTEC KVM products and solutions

A turn-key condition monitoring solution combining the versatility of ultrasound, the analytics of vibration, standard communication protocols and an embedded trending and analysis software. Vigilant Configure Vigilant to any Critical Asset Vigilant is a flexible data collection pod. Input any combo of eight ultrasound and vibration sensors and receive continuous feedback from your assets. 4 channels for Temperature, Tach and Pressure create an all-in-one solution for critical and guarded assets. Vigilant Highlights: - 8 channels (Ultrasound or Vibration) - 4 channels (Temp/Tach/Process) - Embedded data management software - Trends/Spectrum/Waveform/Waterfall - Open communications protocol - Static and Dynamic data Vigilant Permanent:Vigilant Mobility 8 high-speed (Dynamic) multipurpose analog inputs:Same function as Vigilant Permanent; 4 channels (Temp/Tach/Process);:Packaged in rugged, custom waterproof case; ICP power source available on all dynamic inputs;:Designed to travel to off-site assets; Ethernet TCP/IP communications;:Install on assets in alarm to closely monitor until planned shutdown.

Analoge und digitale I/O Module für Hutschinenmontage oder Verteilereinbau Anzeigemodule mit LEDs oder Klartext

cardPresso XXL card design software Upgrade The XXL version adds advanced features like MIFARE® DESFire® encoding, Web Print Server and Net License up to 16 PCs.

The CAN-EtherCAT gateway can link CAN modules with CANopen (CiA DS 301) or layer-2 (ISO 11898-1) implementation to a realtime EtherCAT network. The EtherCAT slave functionality is in accordance with ETG Modular Device Profile No. 5000. The module can also be configured as Ethernet switch port using the EoE protocol. Firmware updates are possible via web interface (EoE) or FoE (File access-over-EtherCAT). The CAN high speed (ISO 11898-2) compatible interface allows a maximum data-transfer rate of 1 Mbit/s. The 100BASE-TX EtherCAT interface is compatible to IEEE 802.3 and runs with 100 Mbit/s. The EtherCAT as well as the CAN interface are electrically isolated. Customization on Request.

Ürünlerin kalitesini ölçmek amacı ile yapılan LVD Alçak Gerilim Testi (Low Voltage Directive), Belirli Gerilim Sınırları Dahilinde Kullanılmak Üzere Tasarlanmış Elektrikli Teçhizat İle İlgili Yönetmelik (2006/95/AT) hükümleri gereğince yapılmaktadır ve uygun koşullar tespit edildiğinde bir kalite belgesi hazırlanmaktadır. Ürünlerin kalitesini ölçmek amacı ile yapılan LVD Alçak Gerilim Testi (Low Voltage Directive), Belirli Gerilim Sınırları Dahilinde Kullanılmak Üzere Tasarlanmış Elektrikli Teçhizat İle İlgili Yönetmelik (2006/95/AT) hükümleri gereğince yapılmaktadır ve uygun koşullar tespit edildiğinde bir kalite belgesi hazırlanmaktadır.

Veuillez trouvez ci-joint nos conditions générales de ventes

Tutti gli strumenti che hanno superato con esito positivo la verifica periodica sono contrassegnati tramite l’applicazione di una etichetta autoadesiva distruttibile con la rimozione, il cosiddetto “bollino verde”, che riporta la scadenza della Verifica Periodica della bilancia. Al centro del bollino è riportato l’Anno nel quale scade la verifica periodica mentre ai lati, su uno dei numeri da 1 a 12 è contrassegnato il Mese di scadenza tramite foratura.

Riparazione e revisione centralina Cpc3 Mercedes.

Komplex kommunikátor, mely megoldást jelent riasztórendszerek távfelügyeletre történő illesztésére, használható önálló átjelzőként, vagy akár IP alapú vezérlőmodulként, valamint lehetőséget nyújt riasztórendszerek távprogramozására és RS232 interfésszel rendelkező eszközök közötti kommunikáció biztosítására interneten keresztül. Az alapmodell funkcióin túlmenően a PRO változat alkalmazható informatikai rendszerekben routerfelügyelet ellátására, vagy akár IP alapú vezérlőmodulként IP kamera támogatással.

Kommunikationsmodule in unterschiedlichen Protokollvarianten für leistungsstarke Automatisierungsgeräte

Measuring Frequency with PPC-CAN-FR The PPC-CAN-FR can be used to connect frequency signals (e.g. from turbines, flow counters or tachometers) to the PPC-Pad or PPC-04-plus-CAN. The instruments can process sinus and rectangle signals from 1 Hz to 5 KHz with signal amplitude from 20 mV to 10 V. Configuration is possible via USB and PC software. Power Supply for External Sensors An external sensor can be supplied with 24 V using the PPC-CAN-FR. Analogue or CAN Output The PPC-CAN-FR can be connected either to an analogue input or CAN input.

"Para aplicações eletrônicas e espaciais que exigem baixa liberação de gases e condensáveis ​​voláteis mínimos para evitar condensação em dispositivos sensíveis. Para colagem ou vedação de elastômeros de silicone e alguns metais ou plásticos"

Das SYS TEC USB CAN Schittstelle - USB-CANmodul8 ist eine galvanisch getrennte CAN Schnittstelle zum Anschluss von 8 high-speed CAN Kanälen über USB.

vCPU 4 RAM 6 GB SSD 100 GB IPv4 Port 1 Gbps

The highly optimized KVM Extender over IP has a range of 150m/492ft at a resolution of 1920x1200 @60 Hz and is available in copper as single version. The perfect tuning of kvm-tec video compression with a low latency time enables a delay-free transmission of the signals. USB and video is transmitted via CAT5e/6/7 cable. Due to the DVI extension Full HD videos can be transmitted in real time. The transparent USB 2.0 interface already supports tablets and touch screens, sound modules, printers and much more. For memory sticks and USB hard drives the USB upgrade is included. High reliability and robust design make the kvm-tec Extender ideal for many applications. The kvm-tec feature "USB save" prevents the intrusion of viruses via the USB interface by deactivating mass storage devices. All upgrades such as USB memory, sound, RS232, analog VGA- as DVI transfer are already included.