Produktai skirti vakuumo kompresorius (70)

Suction capacity 100 to 28000 m³/h; Vacuum to 33 mbar abs.; Discharge pressure to 3.5 bar abs. The 2BE1 series of liquid ring vacuum pumps and compressors is one of the most successful liquid ring pumps worldwide. A great number of models are available. The 2BE1 covers a broad range of suction volume, vacuum and discharge pressure. The series is certified according to ATEX and proved itself in many challenging applications. Vacuum pumps and compressors of the 2BE1 series are used in almost all industrial applications.

100 - 3600 CFM / 170 to 6,100 m³/h The NASH SC can be found in countless industries, performing its duties. Available in nine models, the capacities of the NASH SC compressor range from approximately 100 CFM to 3,600 CFM and up to 25 PSIG. NASH SC compressors come in iron & stainless steel.

Suction capacity 125 to 1400 m³/h; Vacuum to 33 mbar abs.; Discharge pressure to 2.0 bar abs. The NASH 2BM1 magnetic drive pump series is capable of achieving volume flow rates of 125 to 1400 m³/h and vacuum of 33 mbar abs. Non-contact torque transmission is achieved by using a permanent magnetic drive system. The pump's inner working space is hermetically sealed from atmospheric conditions, eliminating any possibility of leakage. This seal is essential for demanding applications, such as processes that are required to meet the most stringent standards on environmental compatibility. ATEX applications are also possible, certifications are available.

15 - 140 CFM / 35 to 210 m³/h Designed from the ground up to meet the widespread needs of the process industry, the Vectra SX adds five models to Nash’s Vectra series in the 1 ½ to 10 HP range at 60 Hz (0.75 to 5.5 kW at 50 Hz), providing the right solution for small capacity vacuum pump requirements. Designed to use less energy and consume less operating liquid than competitive models, it is possible to save the user as much as 40% on power consumption and 50% on water usage.

1500 - 19000 CFM / 2,500 to 33,000 m³/hr Nash's 2BE3 & 2BE4 vacuum pump series offers capacities ranging from 1,500 to 19,000 CFM (2,500 to 33,000 m³/hr). Designed to operate in demanding environments like the paper, power, mining and chemical process industries, these pumps offer durability and reliability at a low cost of operation. Each model is equipped with an application-proven polyisoprene-lined body for added corrosion & erosion resistance. The unique inlet configuration allows for both top and side inlet arrangements to accommodate low headroom installations. In installations where space is limited, the top discharge capability of the 2BE4 allows the use of a top mounted discharge separator that saves floor space and eliminates the need for a trench. The pumps allow efficient operation over the entire vacuum range without the need to change the pump's internals. When equipped with a center shroud, split vacuum operation up to 12 in. Hg (400 millibar) differential can be achieved. Large inspection ports allow easy access to pump internals for inspection and maintenance. For more aggressive applications, stainless steel, stainless steel clad and epoxy coated components are available.

Sie benötigen eine Reparatur an Ihrer Vakuumpumpe oder Ihrem Kompressor schnell, kostengünstig und mit Gewährleistung?

Hocheffizientes Verdichteraggregat (einstufig) mit Riemenantrieb. Optional mit Voreinlassversion für hohen Unterdruck bis -850 mbar. Auch für Saug-/Druckbetrieb geeignet. Ölfrei nach Klasse 0. Extrem belastbar, langlebig und wartungsarm. Volumenstrom::120 bis 2.650 m³/h Unter-/ Überdruck::-850 mbar, Überdruck 3.500 mbar (g) Fördermedium::Luft, sowie neutrale, toxische, brennbare, explosive, korrosive Gase oder Mischgase

Trockenlaufende Drehschieber-Vakuumpumpen und -Kompressoren, Enddruck: 100 - 150 hPa (mbar)

Frischölgeschmierte Drehschieber-Vakuumpumpen, Enddruck: 0,5 hPa (mbar)

Universell einsetzbare Verdichterstufe mit Riemenantrieb. Ölfrei nach Klasse O, sehr energieeffizient und kompakt. Hohe Typenvielfalt in 7 Baugrößen. Volumenstrom::120 bis 2.650 m³/h Unter-/ Überdruck::-850 mbar, Überdruck 3.500 mbar (g) Fördermedium::Luft, sowie neutrale, toxische, brennbare, explosive, korrosive Gase oder Mischgase

Ölgeschmierte Drehschieber-Vakuumpumpen, Enddruck: 0,05 - 20 hPa (mbar)

Trockene Schrauben-Vakuumpumpen, Enddruck: 0,001 - 0,03 hPa (mbar)

Trockene Schrauben-Vakuumpumpen, Enddruck: 0,01 - 1,0 hPa (mbar) Enddruck: 0,01 - 1,0 hPa (mbar) Nennsaugvermögen 50 Hz: 110 - 2000 m³/h Nennsaugvermögen 60 Hz: 130 - 2500 m³/h Die trockenen COBRA Schrauben-Vakuumpumpen arbeiten hocheffizient in vielen industriellen Prozessen, bei denen Gase und Dämpfe zuverlässig und ohne zu verschmutzen gefördert werden. Zuverlässig und robust Eine hohe Flüssigkeits- und Partikelverträglichkeit wird durch das asymmetrische Schraubenprofil und den freien Gasaustritt ermöglicht. Beste Korrosionsbeständigkeit durch gleichmäßige Temperaturverteilung. Der exzellente Wirkungsgrad reduziert die thermische Belastung und erhöht die Lebensdauer. Anwendungsorientiert COBRA Industry Schrauben-Vakuumpumpen stehen in vielen anwendungsspezifischen Varianten zur Verfügung und können somit auf jeden Einsatzfall präzise abgestimmt werden. Außerdem sind verschiedene Ausführungen in ATEX-Zertifizierung erhältlich

This oil-free piston vacuum pump is equipped with a capacitor, a vibration absorber and a silencer. It provides a displacement of 123 l/min and reaches a maximal vacuum of 27 mbar (abs). Voltage (*) V:230 Frequency (*) Hz:50(60) Motor KW:0.53 suction capacity/displacement:123 Max. Vakuum / Max. vacuum mbar (absolute):27 Max. Stromverbrauch/Max. Current A:5.5 Weight kg:11.5 Sound emissions/noise level dB(A)/1m:59 Operating mode/duty cycle:S1 ~ 100% Dimensions (lxwxh)/Dimensions (lxwxh) mm:275 x 140 x 242

170 - 14000 CFM / 240 to 23,700 m³/h The NASH CL Vacuum Pump and Compressor product line is perhaps the most popular ever built. There are 12 different models, from the CL-200 through the CL-14000, with capacities ranging from 150 CFM to over 14,000 CFM. They can be found in many applications including: autoclaves, carburetor testing, chucking, condenser exhausting, container filling, cooking, deaerating, drying, eviscerating, exhausting, extruder venting, fiber setting, filtering, forming, gas stripping, molding, pickup and conveying, priming, slot extraction, and solvent recovery. All CL models are still available from Gardner Denver Nash, the original designer and manufacturer. Whether you have an existing CL pump running in your plant that is in need of service, repair, or replacement with a new or remanufactured duplicate CL pump, Gardner Denver NASH is there for all of the above. Gardner Denver Nash continues to manufacture and offer the CL to our customers.

Trockene Klauen-Vakuumpumpen und -Kompressoren, Enddruck: : 20 - 200 hPa (mbar)

Flüssigkeitsring-Vakuumpumpen und -Kompressoren, Enddruck: 33 - 130 hPa (mbar)

This oil-free piston vacuum pump is equipped with a capacitor, a vibration absorber and a silencer. It provides a displacement of 58 l/min and reaches a maximal vacuum of 27 mbar (abs). Voltage (*) V:230 Frequency (*) Hz:50(60) Motor KW:0.30 suction capacity/displacement l/min:58 Max. Vakuum / Max. vacuum mbar (absolute):27 Max. Stromverbrauch/Max. current A:1.7 Weight kg:8.4 Sound emissions/noise level dB(A)/1m:56 Operating mode/duty cycle:S1 ~ 100% Dimensions (lxwxh)/Dimensions (lxwxh) mm:240 x 134 x 198

Durch die Kombination von Rootsvakuumpumpen mit einer passenden Vorpumpen lassen sich unsere ZSCP Vakuumpumpstände an die unterschiedlichsten Anwendungsfälle anpassen.

Universell einsetzbare Verdichterstufe mit Riemenantrieb. Ölfrei nach Klasse O, sehr energieeffizient und kompakt. Hohe Typenvielfalt in 7 Baugrößen. Volumenstrom::770 bis 15.000 m³/h Unter-/ Überdruck::-850 mbar, Überdruck 3.500 mbar (g) Fördermedium::Luft, sowie neutrale, toxische, brennbare, explosive, korrosive Gase oder Mischgase

Rotary Vane air compressors and vacuum pumps are used in thousands of applications worldwide. Available in oilless, lubricated, motor-mounted, and separate drive styles, they offer a wide choice of capabilities.

Zweistufige ölgeschmierte Drehschieber-Vakuumpumpen, Enddruck: 6,7·10 -3 hPa (mbar)

Vakuumpumpstände für die Verfahrenstechnik zum Destillieren, Verdampfen, Trocknen, Evakuieren uvm. Wir analysieren Ihren Bedarfsfall und konzipieren den passenden Vakuumpumpstand auch in ATEX.

Suction capacity 125 to 1400 m³/h; Vacuum to 33 mbar abs.; Discharge pressure to 2.0 bar abs. The NASH 2BM1 magnetic drive pump series is capable of achieving volume flow rates of 125 to 1400 m³/h and vacuum of 33 mbar abs. Non-contact torque transmission is achieved by using a permanent magnetic drive system. The pump's inner working space is hermetically sealed from atmospheric conditions, eliminating any possibility of leakage. This seal is essential for demanding applications, such as processes that are required to meet the most stringent standards on environmental compatibility. ATEX applications are also possible, certifications are available.

Hochwirtschaftliches Drehkolbenverdichter-Aggregat mit Riemenantrieb und innerer Verdichtung bis 70 % Vakuum. Ölfrei nach Klasse 0. Absorptionsmittelfreier Druckschalldämpfer, niedrige Schallpegel. Reduzierte Wartungskosten und gesenkter Energieverbrauch für nachhaltig geringe TCO. Extrem zuverlässig und langlebig. Volumenstrom::110 bis 9.000 m³/h Unterdruck::-700 mbar Fördermedium::Luft und neutrale Gase

Gast diaphragm units require no lubrication making these units the perfect choice of installation for critical applications found in medical facilities, laboratory equipment, air sampling devices, portable gas detectors and dental equipment. With their outstanding performance, durability and flexibility, the varied range of Gast oil-less diaphragm air compressors and vacuum pumps are ideal for industrial applications too.

This oil-free piston vacuum pump is equipped with a capacitor, a vibration absorber and a silencer. It provides a displacement of 47 l/min and reaches a maximal vacuum of 107 mbar (abs). Voltage (*) V:230 Frequency (*) Hz:50(60) Motor KW:0.25 Ansaugleistung/Displacement l/min:47 Max. Vakuum / Max. vacuum mbar (abs):107 Max. Stromverbrauch/Max. Current A:1.7 Weight kg:6.8 Sound emissions/noise level dB(A)/1m:56 Operating mode/duty cycle:S1 ~ 100% Dimensions (lxwxh)/Dimensions (lxwxh) mm:181 x 134 x 198

High Capacity Monoblock Pumps Available in cast iron construction, the 2AV1 family provides capacities up to 600 m 3/h (360 CFM) in a compact monoblock design. When compared to conventional pumps, the 2AV1's monoblock design delivers the benefits of a simple, compact and economical installation. Since the pump and motor are integral and self supporting, there is no need for additional baseplates, couplings or guards, which add to the cost, complexity and overall size of the installation. We focused on durability and dependability when we developed these liquid-ring pumps. With a reinforced stainless steel shaft and sealed bearings, the 2AV1 can provide up to 20,000 hours of maintenance-free operation. The 2AV1 is expertly designed and manufactured to be quiet and vibration free. With sound pressure levels of less than 75 dBA, it complies with the strictest noise standards, eliminating the need for additional sound attenuating devices. Advantages at a glance Compact Rugged design for reliable operation and long service life Precision-balanced rotor 60hz Motors, UL recognized components Available from stock Low installation costs Easy to service Standard mechanical seal Reinforced stainless-steel shaft in the pump body Main Applications Plastics industry Chemical industry Medical technology Food and beverage industry General industry

This oil-free piston vacuum pump is equipped with a capacitor, a vibration absorber and a silencer. It provides a displacement of 149 l/min and reaches a maximal vacuum of 80 mbar (abs). Voltage (*) V:230 Frequency (*) Hz:50(60) Motor KW:0.53 suction capacity/displacement l/min:149 Max. Vakuum / Max. vacuum mbar (absolute):80 Max. Stromverbrauch/Max. current A:2.5 Weight kg:11.5 Sound emissions/noise level dB(A)/1m:59 Operating mode/duty cycle:S1 ~ 100% Dimensions (lxwxh)/Dimensions (lxwxh) mm:275 x 140 x 240

18 - 75 CFM / 30 to 127 m³/h Innovative and economical monoblock pumps The NASH 2BV7 pumps have been designed to provide superior performance for a wide array of applications. Available from 18 to 75 CFM (30 to 140 m³/hr), their high vacuum capability, extra water handling ability and compact size combine to make an ideal machine for industries like plastics manufacturing and medical technologies. Combining quality construction with reliability The simple construction and quality materials of the 2BV7 combine for an extremely reliable machine. Featuring a corrosion free compression chamber that includes a stainless steel body, shaft and port plate, these pumps provide excellent resistance to to corrosive and errosive media. Whats more, with the corrosion free materials, the one moving part (the rotor) is ensured to turn freely even after long periods of inactivity. For worldwide use and available for quick delivery. The 2BV7 is equipped with a very versatile motor that is ready to be installed nearly anywhere throughout the world. The motor includes wide voltage range capability, an IP55 enclosure and is suitable for 50/60 Hz service. It also comforms to international standards, including UL and CSA. Providing a motor designed for the global market ensures that the 2BV7 is available when you need it, whether here or abroad.