The AWALIFT 4/2 achieves a discharge head of up to 55 mWS, and is also available in the AWALIFT 4/2x2 version. This variation achieves a discharge head of up to 110 mWS. An opening of just 2 x 2 m is required for installation; once installed, the exterior dimensions of the system are 4.5 x 3.5 m. Different motor variations allow the system to be precisely adapted to your particular needs. The impellers are adjusted to the specific requirements. Draining towns with up to about 5600 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system. Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 150 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

Collaboration avec des restaurants, des cavistes et d'autres partenaires commerciaux pour la promotion et la distribution des vins.

20,00 x 10,00 x 3,00 x 3,00 mm - 100,00 x 50,00 x 6,00 x 6,00 mm, DIN EN 10279 (DIN 1026), Abnahmeprüfzeugnis nach DIN EN 10204 / 3.1, AD 2000 - W2 / W10 4,00 - 6,00 m Werkstoffe: 1.4301/1.4307/TP304/TP304L 1.4571/ TP316Ti 1.4401/1.4404/TP316/TP316L 1.4541 / TP 321 1.4305 /TP303

Anfix es una plataforma de gestión empresarial y contable en la nube diseñada para facilitar el día a día de pymes, autónomos y profesionales contables. Con una interfaz intuitiva y herramientas avanzadas, Anfix permite gestionar la contabilidad, facturación y finanzas de forma eficiente y segura desde cualquier lugar. Entre sus principales características, destaca la automatización de tareas repetitivas como la creación de facturas, la conciliación bancaria y la generación de informes financieros, lo que ayuda a ahorrar tiempo y reducir errores humanos. La plataforma está diseñada para cumplir con las normativas fiscales y ofrecer información actualizada en tiempo real, lo que permite a los usuarios tener un control total sobre sus ingresos y gastos. Además, Anfix proporciona herramientas para la colaboración con contables, facilitando el intercambio de información y simplificando la comunicación en el proceso de gestión contable. Con su enfoque en la simplicidad y la flexibilidad, Anfix se ha convertido en una solución ideal para aquellos que buscan mejorar la eficiencia de sus procesos contables y administrativos, sin complicaciones técnicas. En resumen, Anfix combina tecnología y experiencia para ofrecer una solución integral de gestión empresarial en la nube, ayudando a las empresas a tomar decisiones informadas, optimizar sus recursos y crecer con confianza.

Schluss mit Kaltakquise: Vorqualifizierte, kaufbereite B2B-Leads ab morgen in Ihrem Kalender! Stellen Sie sich vor, Ihr Vertrieb bekommt täglich exklusive Termine mit den entscheidenden Köpfen Ihrer Zielgruppe – ganz ohne Akquise-Stress. Wir liefern Ihnen qualifizierte Verkaufschancen direkt auf dem Silbertablett, damit Sie sich nur noch auf den erfolgreichen Abschluss konzentrieren.

Assist è il software gestionale dedicato alle aziende che si occupano dei servizi di installazione, assistenza tecnica, manutenzione e riparazione su impianti e macchinari. La relativa APP sviluppata per piattaforme Android e iOS consente di gestire in mobilità - anche offline - le attività dei tecnici per la produzione del rapporto di intervento digitale e la raccolta di tutti i dati necessari alla contabilizzazione degli interventi. Assist è in grado di integrarsi con sistemi gestionali di terze parti e - tramite API - ha sviluppato numerosi connettori per servizi esterni. Il sistema si presenta come una piattaforma solida, integrata ed adattabile nel suo utilizzo.

Solvent

ZTrad è una suite di prodotti per automatizzare le traduzioni di files Autocad/Microstation, immagini, e documenti tecnici office o Pdf. ZTrad per Autocad, Microstation ed immagini è il tool cat numero 1 in italia

El TPV más completo Adaptado a tu establecimiento Agilizamos el día a día de miles de empresas, automatizando tareas cotidianas de ventas, stocks, pedidos, empleados, arqueos e informes. Miles de establecimientos confían en SMtpv.

Als Spezialist für eingebettete Systeme verfügen wir über große Erfahrung im Bereich der Firmware-Entwicklung und Firmware-Erstellung für diverse Controller und Prozessoren

The STRATE AWALIFT 80 is the system preferred for draining single- and two-family homes where the drainpipe is below the backwater level (acc. to DIN 1986-100) and the houses cannot be drained using natural gradient. DIN EN 12056-4 specifies the backwater level here as being the road surface of the connection point to the public sewage system. The AWALIFT 80 was specially developed as a small system for building services engineering (max. 12 residents). This means that for the first time, demanding users now have a sewage pumping station available in patented and tried-and-trusted separator technology, which employs polymer components throughout. And the separator system effectively prevents pump blockage. Area of use Single-family homes (e.g. toilet, shower, bath, sink, washing machine etc.) Basement flats Party rooms in the basement Two-family homes etc. Product features Sewage Pumping Station AWALIFT 80 after DIN EN 12056-4 Suitable for faecal wastewater

The AWALIFT 0/2 double installation with proven STRATE system conforms to the requirements of DIN 1986-100 and DIN EN 12056-4. The installation forms a closed, gas and odor-tight system that fulfills the highest requirements for hygiene and safety. The system can also be installed directly in the basement; no excavation is required. If it is installed outdoors, however, using a STRATE AWALIFT shaft is recommended. Larger buildings, industrial companies, individual streets Where the reserve pump has to guarantee fail-safe operation e.g. in restaurants and public buildings Facilities that cannot be drained using natural gradient As protection from backwater damage Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Two non-return valves AWASTOP DN 100 K Two pressure pipe gate valves DN 100 Tank:G-AI Si12 (Alu 230) Coating:Acrylic combination paint coating

An especially large system with six pumps and a tank content of 26.0 m3, a system power of 800 m3/h and a weight of approx. 6.3 t can reliably handle drainage for a city with up to 37,000 residents. The unique pump controls achieve a discharge head of 40 mWS, while the AWALIFT 10/6x2 version boosts this discharge head to 80 mWS. Proven components, such as our separator, separating flaps, level controller, etc. are used in this system as well. Draining towns with up to about 37,000 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with six separator systems Six centrifugal pumps and motors according to type and operating location required Twelve pump gate valves Six STRATE non-return valves One Y-pipe DN 300 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The AWALIFT 2/2 penta is available in two power levels. The first option offers system power of - up to 25 m3/h for up to 1200 residents and - up to 36 m3/h for up to 1700 residents Despite their small size, the wastewater pump stations offer all the advantages of the AWALIFT series: - our trusted bulk materials collecting chamber system, dry set-up, and thanks to their good power levels, they can move wastewater across long distances. Different motor variants allow the system to be precisely adjusted to your needs. Area of use Draining small towns with up to about 1200 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type

This sewage pumping system can be used for districts with up to 3700 residents and it offers a discharge head of up to 80 mWS. The expanded version, the AWALIFT 3/2x2, even offers a discharge head of up to 120 mWS. Accessories, such as a smart pump controller, a basement drainage pump, pipelines and a variety of flanges within a single building, and much more are available for purchase on request. Draining small towns with up to about 3700 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 125 Two pressure pipe gate valves DN 125 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The STRATE AWALIFT 100 is the system preferred for draining storeys, houses and plots of land below the backwater level in accordance with DIN 1986-100, i.e. for properties that cannot be drained using natural gradient. DIN EN 12056-4 specifies the backwater level here as being the road surface of the connection point to the public sewage system. Single-family homes (e.g. toilet, shower, bath, sink, washing machine) Basement flat Party rooms in the basement Two-family homes Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4 Tank:G-Al Si12 (Alu230) Coating:Acrylic combination paint coating

The AWALIFT 5/2 achieves a discharge head of up to 50 mWS, and is also available in the AWALIFT 5/2x2 version. This variation achieves a discharge head of up to 100 mWS. Different motor variations allow the system to be precisely adapted to your specific needs, and the impellers are adjusted to the operating point. This system is used for drainage in towns with up to 7,000 residents. Draining towns with up to about 7000 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system. Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 150 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The AWALIFT 0/1 requires a space of just 1200 mm x 1200 mm or d=1500 mm. Thanks to its unique design, it can be installed in even non-standard installation areas. A variety of available motor power levels make it suitable for use in a wide range of applications. Multi-family homes Facilities that cannot be drained using natural gradient As protection from backwater damage Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4 Tank:G-AI Si12 (Alu 230) Coating:Acrylic combination paint coating

The AWALIFT 1/2 is used primarily in municipal applications for draining large properties. It is a fully automated, floodable sewage pumping system with a proven separator system for up to 750 EW. Alternating two pumps provides a high level of operational reliability. There is no need to provide reserve pumps. This system also has a gas and odor-tight tank, the surface of which is coated with high-quality corrosion protection. •Larger buildings, industrial companies, individual streets •Facilities that cannot be drained using natural gradient •As protection from backwater damage •Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with two separator systems Two rotary pumps and motors according to type and operating location required Two non-return valves AWASTOP DN 100 K Y-pipe DN 100 Two pressure pipe gate valves DN 100 Level measurement LGA certified according to DIN EN 12050-1 /. -4 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The AWALIFT 74/2 double installation provides improved operational reliability, since the pumps alternate to pump waste water (which has already been separated from bulk materials) from the separator. Bulk materials are first pumped into the pressure line, then the line is flushed with pre-cleaned water from the tank. Multi-family homes Where the reserve pump has to guarantee fail-safe operation e.g. in restaurants and public buildings Facilities that cannot be drained using natural gradient As protection from backwater damage Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with separator system Two centrifugal pumps and motors according to type and operating location required Two non-return valves AWASTOP DN 100 K Two pressure pipe gate valves DN 100 Level measurement LGA certified according to DIN EN 12050-1 /. -4 Tank:G-AI Si12 (Alu 230) Coating:Acrylic combination paint coating

With our trusted separator system, suitable for up to 29,000 residents at a system power of 600 m3/h. The base version, the AWALIFT 9/4, achieves a discharge head of 40 mWS, and the expanded version AWALIFT 9/4x2 achieves 80 mWS. Smart pump controllers are available as accessories, and are specially adapted to your system and your specific needs. The impellers are adapted to the operating point to achieve optimal performance. Draining towns with up to about 29,000 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with four separator systems Four centrifugal pumps and motors according to type and operating location required Eight pump gate valves Four STRATE non-return valves One Y-pipe DN 300 Four pressure pipe gate Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The AWALIFT 6/2 is designed for up to 9,300 residents, and is able to provide drainage for small towns. The proven separator system is also used in this size, and the systems are installed dry. System operation and maintenance are very user-friendly. The pump controls are designed according to the user's needs and mounted in an external cabinet. Additional accessories are available for this system, please submit your inquiry. Draining towns with up to about 9300 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 200 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The AWALIFT 1/2 penta offers lots of power while requiring very little space. The system is installed directly at the shaft wall; this configuration significantly reduces the required shaft diameter. In addition, the 1/2 penta offers our trusted separator system. The use of two pumps ensures a high level of operational reliability. Large system capacity despite small space requirements: The system is set up directly at the shaft wall This makes a small shaft diameter possible Larger buildings, industrial companies, individual streets Facilities that cannot be drained using natural gradient As protection from backwater damage Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two non-return valves AWASTOP DN 100 K Y-pipe DN 100 Two pressure pipe gate valves DN 100 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The AWALIFT 2/2x2 wastewater pumping system is suitable for towns with up to approx. 2800 residents. The system can achieve a discharge head of up to 120 mWS, thanks to the parallel operation of two pumps. An adapted, intelligent pump controller handles control, ensuring almost fault-free operation. Draining small towns with up to about 2800 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems 2 x 2 centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 100 Two pressure pipe gate valves DN 100 Level measurement Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The AWALIFT 2/2, with a system power of 60 m3/h raw wastewater, is suitable for towns with up to 2800 residents. The separator system offers a clean solution, since the container is gas and odor-tight. Different motor variations allow the system to be individually adapted to on-site conditions. AWALIFT systems can also move wastewater over long distances. Draining small towns with up to about 2800 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 100 Two pressure pipe gate valves DN 100 Level measurement Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The STRATE AWALIFT 74/1 is used primarily for draining floors, multi-family buildings and properties above the backflow level in accordance with DIN 1986-100, e.g. for properties that cannot be drained via a natural slope. DIN EN12056-4 establishes the upper edge of the street at the connection point to the public sewer system as the backflow level. Two-family homes Facilities that cannot be drained using natural gradient As protection from backwater damage Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4 Tank:G-AI Si12 (Alu 230) Coating:Acrylic combination paint coating

With a diameter of 2.5 m and a height of 3 m, the tank and separator system is equipped to reliably drain wastewater for a small city of up to 18,600 residents. In addition, the tank offers a gas and odor-tight seal. Three pumps provide good operational reliability; maintenance work is easy to complete thanks to dry installation. Draining towns with up to about 18,600 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with three separator systems Three centrifugal pumps and motors according to type and operating location required Six pump gate valves Three STRATE non-return valves One Y-pipe DN 250 Three pressure pipe gate valves DN 250 Level measurement Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

The STRATE AWALIFT 1/2x2 is used in many applications that require small quantities of waste water to overcome a high discharge head. With a capacity of 15 m3/h, the system is suitable for up to 750 EW. The system can be adapted to your individual needs through the use of different motor variations. Drainage of small towns with up to about 750 residents that cannot be drained using natural gradient. Drainage with larger pumping heads and longer pressure pipes As an intermediate pumping station within a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features The tank with two separator systems Four centrifugal pumps ST (M)65/80, motors according to type and operating location required Four pump gate valves One Y-pipe Two STRATE non-return valves Two gate valves Level measurement LGA certified according to DIN EN 12050-1 /. -4 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

This AWALIFT is also available in an extended design, the AWALIFT 7/3x2, which achieves a discharge head of 92 mWS, while the AWALIFT 7/3 achieves a discharge head of 46 mWS. We offer everything from a single source, from planning to installation. STRATE project engineers are experienced in turning your specialized requirements, such as conveying wastewater over large distances and high discharge heads, into first-class process solutions. Our patented separator system makes it possible to connect two circulating pumps in series.Tank: S235JR (St37-2) Draining towns with up to about 16,300 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with three separator systems Three centrifugal pumps and motors according to type Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis

Anywhere small quantities of wastewater need to overcome a high discharge head is the perfect application for the flattened version of the AWALIFT 2/2, with a shape that makes it a good space-saving option. It also offers our proven bulk materials collection system and is installed dry. The system controls are individually adjusted and installed in a switch cabinet outside of the shaft. Draining small towns with up to about 1700 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves Two pressure pipe gate valves DN 100 One Y-pipe DN 100 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis