Produktai skirti sūrį 1614 (32)

Standard disconnector for indoor use with endurance class M0 (till 1000 C-O) which is very easy and quick adaptable thanks to his easy modular design. This isolator is also available in combination with an earthing device, in 2- or 3- position execution, etc.

This compact indoor disconnector is designed by EME for MV applications where there is a special need for compact, solid and high endurance isolators. The MI-COMP is characterized by: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Compact contacts and blades in silverplated electrolytic cupper. High short-circuit withstand. Very compact thanks to special design of active parts. High endurance of contacts is assured by multiple inserts, up to 50.000 close-open cycles. Mechanical endurance class M2 (= min. 10.000 C-O) Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3-pole: also available in 1- or multiple pole version. On demand: mounting possible in each position. On demand: High Endurance (=HE) execution (>50.000 C-O) Below you'll find the different executions and accessories of the MI-COMP family:High Endurance MI-COMP with a higher lifetime of 50.000 - 250.000 C-O cycles, depending on the co

Outdoor earthswitch for wall-mounting, characterized by his hot dip galvanised chassis and insulators in porcelain or polymer.

The MV disconnector cabinets type IC are designed as envelope for EME disconnectors. They'll be built completely according customer wishes and can be equipped with separate LV control box, synoptic/signalisation panel on the door, etc.

This compact indoor disconnector is designed by EME for MV applications where there is a special need for compact, solid and high endurance isolators. The MI-COMP is characterized by: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Compact contacts and blades in silverplated electrolytic cupper. High short-circuit withstand. Very compact thanks to special design of active parts. High endurance of contacts is assured by multiple inserts, up to 50.000 close-open cycles. Mechanical endurance class M2 (= min. 10.000 C-O) Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3-pole: also available in 1- or multiple pole version. On demand: mounting possible in each position. On demand: High Endurance (=HE) execution (>50.000 C-O) Below you'll find the different executions and accessories of the MI-COMP family:Here you'll find a list of several accessories of the MI-family

Allround earthswitch for indoor use. The earthswitch is also available in a high endurance execution for applications up to 10.000 C-O, modular version, quick closing version, etc.

One pole on-load switch for indoor use.

The indoor disconnector EME type MI has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3 poles, also 1- or multiple pole version available. Below you'll find the different executions and accessories of the MI-UNEL family:MI-UNEL with built-on interlocked earth switch.

The one pole indoor used disconnector EME type MI-UI is based on the MI-UNEL family and has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Below you'll find the different executions and accessories of the MI-UI:MI-UI with motor drive L(ight). Complete integrated motor drive, available in several supply voltages, with a manual emergency control on the motor.

This compact indoor disconnector is designed by EME for MV applications where there is a special need for compact, solid and high endurance isolators. The MI-COMP is characterized by: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Compact contacts and blades in silverplated electrolytic cupper. High short-circuit withstand. Very compact thanks to special design of active parts. High endurance of contacts is assured by multiple inserts, up to 50.000 close-open cycles. Mechanical endurance class M2 (= min. 10.000 C-O) Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3-pole: also available in 1- or multiple pole version. On demand: mounting possible in each position. On demand: High Endurance (=HE) execution (>50.000 C-O) Below you'll find the different executions and accessories of the MI-COMP family:The standard execution of the family.

The one pole indoor used disconnector EME type MI-UI is based on the MI-UNEL family and has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Below you'll find the different executions and accessories of the MI-UI:2 MI-UI disconnectors mounted on 1 frame, the one above the other as an invertor-switch with a mechanical interlock between both.

Fuse holder for outdoor use, built according the IEC dimensions, available in 1- as well as 3-pole version, with or without signalisation contact, etc.

The one pole indoor used disconnector EME type MI-UI is based on the MI-UNEL family and has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Below you'll find the different executions and accessories of the MI-UI:Here you'll find a list of several accessories of the MI-family.

This compact indoor disconnector is designed by EME for MV applications where there is a special need for compact, solid and high endurance isolators. The MI-COMP is characterized by: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Compact contacts and blades in silverplated electrolytic cupper. High short-circuit withstand. Very compact thanks to special design of active parts. High endurance of contacts is assured by multiple inserts, up to 50.000 close-open cycles. Mechanical endurance class M2 (= min. 10.000 C-O) Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3-pole: also available in 1- or multiple pole version. On demand: mounting possible in each position. On demand: High Endurance (=HE) execution (>50.000 C-O) Below you'll find the different executions and accessories of the MI-COMP family:Changeover disconnector with 2 positions: closed pos.1 - closed pos.2. Often used for bypass appl

The one pole indoor used disconnector EME type MI-UI is based on the MI-UNEL family and has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Below you'll find the different executions and accessories of the MI-UI:Low-cost version of the standard MI-UI where the same active parts are used with a cheaper frame and shaft parts.

The EME on-load switch for indoor use type GP1 is designed to break currents up to 630A. This switch is also available in combination with an earthing device, capacitive insulators, etc.

The indoor disconnector EME type MI has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3 poles, also 1- or multiple pole version available. Below you'll find the different executions and accessories of the MI-UNEL family:The standard execution of the family. The one pole version of the family you'll find here...

This compact indoor disconnector is designed by EME for MV applications where there is a special need for compact, solid and high endurance isolators. The MI-COMP is characterized by: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Compact contacts and blades in silverplated electrolytic cupper. High short-circuit withstand. Very compact thanks to special design of active parts. High endurance of contacts is assured by multiple inserts, up to 50.000 close-open cycles. Mechanical endurance class M2 (= min. 10.000 C-O) Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3-pole: also available in 1- or multiple pole version. On demand: mounting possible in each position. On demand: High Endurance (=HE) execution (>50.000 C-O) Below you'll find the different executions and accessories of the MI-COMP family:3-position disconnector, available in 5 different configurations.

Fuse holder for indoor use, built according the IEC dimensions, available in 1- as well as 3-pole version, with or without signalisation contact, etc.

The indoor disconnector EME type MI has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3 poles, also 1- or multiple pole version available. Below you'll find the different executions and accessories of the MI-UNEL family:3-position disconnector, available in 5 different configurations.

contact us directly on: site@eme.be

(BR018) Fuse disconnector SPV-CF (BR016) Accessories (BR081)

The indoor disconnector EME type MI has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3 poles, also 1- or multiple pole version available. Below you'll find the different executions and accessories of the MI-UNEL family:Here you'll find a list of several accessories of the MI-family

This compact indoor disconnector is designed by EME for MV applications where there is a special need for compact, solid and high endurance isolators. The MI-COMP is characterized by: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Compact contacts and blades in silverplated electrolytic cupper. High short-circuit withstand. Very compact thanks to special design of active parts. High endurance of contacts is assured by multiple inserts, up to 50.000 close-open cycles. Mechanical endurance class M2 (= min. 10.000 C-O) Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3-pole: also available in 1- or multiple pole version. On demand: mounting possible in each position. On demand: High Endurance (=HE) execution (>50.000 C-O) Below you'll find the different executions and accessories of the MI-COMP family:MI-COMP with built-on interlocked earth switch.

The indoor disconnector EME type MI has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3 poles, also 1- or multiple pole version available. Below you'll find the different executions and accessories of the MI-UNEL family:Not found what you were looking for and/or you're looking for something very specifically like an appliance for marine-applications, specific corrosion environment, a switch with small breaking capacity, etc. Or contact us directly on; site@eme.be

The one pole indoor used disconnector EME type MI-UI is based on the MI-UNEL family and has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Below you'll find the different executions and accessories of the MI-UI:The standerd execution of the series.

Earthswitch for indoor use with fault making capacity (Ima) up to 157,5 kApeak

The EME on-load fuse switch for indoor use type GP2V is designed to break currents up to 630A. An intelligent system realises the 3-phase opening of the switch when one or more fuses have tripped. The switch can also be opened by means of a delayed under voltage release or trip coil, can be equipped with an earthing device, etc.

This compact indoor disconnector is designed by EME for MV power drive applications where there is a special need for compact, solid and high endurance isolators. This disconnector is available in combination with an earthing device, in 2- or 3- position execution, in high-endurance applications where up to 250.000 close-open cycles are requested, etc.

The indoor disconnector EME type MI has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Standard execution is 3 poles, also 1- or multiple pole version available. Below you'll find the different executions and accessories of the MI-UNEL family:The heavy variant of the standard MI-UNEL with currents from 2000A till 3600A