Selezione automatica della gamma, tensione della prova selettiva da 1 V… 1000 V, interfaccia RS232 (IEEE-488) CARATTERISTICHE Gamma di resistenza da 1 kΩ… 100 TΩ Gamma corrente da 0.1 PA… 1 mA Autorange Verifichi la tensione selettiva da 1 V… 1000 V Limiti l'indicatore I risultati di misura conservabili sul flash esterno del USB guidano Interfaccia RS232 (USB ed Ethernet facoltativi) Tipo di quadrante:digitale Mobilità:da banco

Dymax UV and visible radiometers are easy to operate and allow operators to monitor and document a UV/Visible light curing process. Features: - Helps lightcuring system maintain consistent intensity and dosage levels - Provides a worker friendly lightcuring process by measuring stray or reflected energy - Measure the light intensity transmission rate through the substrate to ensure an effective cure

Das UV-Messgerät KUV 2.4 WR ist zur Kontrolle von UV-Sensoren in Wasserdesinfektionsanlagen vorgesehen. Esist als robustes Handgerät ausgeführt und ermöglicht die vor Ort- Überprüfung und Korrektur von Anlagensensoren. Der entsprechende Vergleichssensor wird anstelle des Anlagensensors verwendet oder in ein separates Tauchrohr eingesetzt. Das Messgerät erkennt den richtigen Vergleichssensor, zeigt diesen im Display an und übernimmt dessen Kalibrierwerte. Darüber hinaus kann ein zu überprüfender, digitaler Anlagensensor der Typenreihe SUV 19 zusätzlich angeschlossen und mit dem Vergleichssensor überprüft werden. Über das Gerätemenü ist eine Korrektur bzw. Anpassung des Anlagensensors auf Basis des Vergleichssensor-Messwertes möglich. Das Messgerät ist batteriebetrieben, besitzt eine zweizeilige LCD-Anzeige, die neben anderen Informationen die Bestrahlungsstärkein Wm-2 anzeigt. Die vier Messbereiche werden automatisch umgeschalten. Mit den drei Tasten ist das Gerät leicht bedienbar.

The UVpad is the world‘s thinnest spectral measuring and autonomous UV radiometer. It combines scientific measurement technology with a compact and user-friendly instrument. With its innovative measuring principle, it doesn't use optical filters. UV light is spectrally detected and analyzed in the UVpad. Thus, measurements are traceable to national standards. Since it works without a filter, it is particularly suitable for the measurement and comparison of different lamps. All measurement data are displayed on the device immediately; 50 measurements are stored in the UVpad and can be read via USB. The supplied PC software evaluates the irradiance intensity profiles measured separately for UVA, UVB, UVC, and VIS. Spectrum and measurement data can be exported and saved. Optionally, UV systems can be optimized due to saved operating functions such as, for example, the absorption spectra of photo initiators. Thus, the operation costs can be reduced and the product quality can be ensured. Dimensions:160 x 100 x 14,4 mm³ Weight:~ 375 g Operation temperature:10 -70 °C Battery:internal LiIon accu Memory:50 measurements

Sicherheitstester sind unverzichtbare Prüfgeräte bei der Herstellung von Produkten, die einen Netzanschluss besitzen.

This radioactivity detector is the one to choose if you need to make precise measurements concerning protection of the environment and our health. Using this radioactivity detector you can detect the slightest X and GAMMA rays plus BETA particles in the environment and food (e.g. game animals). It beeps for each detection and an acceleration of these beeps indicates how close the radioactive source is. The 3 figure display is in mRem/hour (from 0 to 999).

Iskrobezpieczny (IS – Intrinsically Safe) dozymetr osobisty PED-IS (Personal Electronic Dosimeter – Intrinsically Safe) jest prosty w użyciu nie tylko dla doświadczonych radiologów ale również dla tych którzy nie zajmują się pomiarem dawki promieniowania na co dzień. Jest bezpieczny nawet w warunkach potencjalnego wybuchu, niezwykle odporny a przy tym wiarygodny, idealny do użytku w trudnych warunkach. Dozymetr PED-IS mierzy zarówno dawkę jak i moc dawki promieniowania rentgenowskiego.

Portables Spektralphotometer mit Kugelgeometrie und vertikaler Bauform

Spektralradiometer für die hochgenaue Bestimmung der Lichtfarbe und andere radiometrische Messung im UV und IR Bereich.

Die HT1000 und die HT2000 haben zahlreiche Anwendungsmöglichkeiten in der metallerzeugenden und der metallverarbeitenden Industrie, in der Versorgungsbranche, in der Erdöl-, der Chemie- und der Automobilindustrie sowie in Luft- und Raumfahrt. Aufgrund ihrer geringen Größe und der einfachen Einhandbedienung eignen sie sich ideal zum Testen großer und schwerer Schmiede- und Gussteile, wie Stahlwerkswalzen und Turbinengehäuse. Mit diesen kleinen und mobilen Prüfgeräten können Einzelteile einer großen Baugruppe getestet werden, ohne dass sie zerlegt werden muss. Die Geräte können in beliebiger Richtung eingesetzt werden und erfordern nur eine kleine Oberfläche, um schnelle und präzise Messungen durchzuführen.

Digital-Anemometer inkl. Lufttemperaturmesung HTA105 wurde für die Luftgeschwindigkeitsmessung entwickelt. Zur Auswahl stehen europäische oder angelsächsische Messeinheiten. Das Hitzdrahtanemometer führt Messungen mit einer ausziehbaren Teleskopsonde durch, die dank ihrer eingebauten Sensoren auch Temperatur- und Feuchtigkeitsmessungen durchführen kann. Weitere Funktionen umfassen die Messung des Luftvolumenstroms (CMM- und CFM-Parameter) sowie die Berechnung von Durchschnittswerten in Volumen und Zeit. Die HTA105 verfügt zusätzlich über einen internen Speicher, der mit den Funktionen MAX/MIN und Data HOLD die Messergebnisse der Luftgeschwindigkeit speichern kann. Es ist mit einem hintergrundbeleuchteten Doppel-Display und automatischer Abschaltung ausgestattet, um die interne Akkulaufzeit zu sparen.

Gamma di radiometri UV della EIT Instrument Market, strumenti per misurare l'energia UV e per stabilire la durata della lampada UV. Power Puck II, UVICURE Plus, Power Map, Microcure, sensori UV in linea.

Die Lichtmühle ist ein kleines Sonnenkraftwerk im edlen Glasdesign. Stehend.

Compacts Les dynamomètres DYNAFOR font appel à une technologie avancée en matière de miniaturisation électronique. Le poids et les dimensions extérieures ont pu être réduits d'une façon substanielle, et les appareils se présentent sous une forme compacte et très maniable.Deux alésages, destinés à recevoir les manilles, sont prévus à chaque extrémité. L'affichage digital par cristaux liquides est très lisible; les chiffres ayant sur la plupart des modèles une hauteur de 25 mm. Fiables Robustes, précis (env. 0,3% pour la plupart des modèles courants), sûrs (essayés à 2 fois leur charge nominale et conçus avec un coefficient de sécurité 5) les appareils DYNAFOR sont particulièrement stable dans le temps et peuvent être utilisés entre -10° et +50°C. La plupart des modèles sont étanches à l'eau de pluie. Leur poids réduit, leur faible encombrement et leur prix les rendent tout à fait compétitifs, comparés aux

Termometro digitale

Il calibratore portatile KAL 84, alimentato a batteria, è una combinazione fra trasduttore e misuratore di pressione. Lo strumento consente di controllare e calibrare con facilità sensori di pressione ed altri misuratori di basse pressioni. L’elevata precisione, l’eccellente riproducibilità e la particolare robustezza lo rendono uno strumento ideale per l’impiego in laboratori e per interventi del servizio di assistenza tecnica. Grazie alla calibrazione opzionale in mmHg è particolarmente indicato per l’impiego conforme alla direttiva sui prodotti medicali per i controlli metrologici (p.es. per sfigmomanometri, pompe da infusione e pompe aspiranti). Campo di misura:0 .. 100 Pa - 0 .. 100 kPa (o 0 .. 300 mmHg o 0 .. 750 mmHg) Accuratezza di misura:± 0,2 % oppure ± 0,5 % FS

Selección automática de la gama, voltaje de la prueba seleccionable a partir de 1 V… 1000 V, interfaz RS232 (IEEE488) CARACTERÍSTICAS Gama de la resistencia a partir de 1 kΩ… 100 TΩ Gama actual a partir de 0.1 PA… 1 mA Autorange Pruebe el voltaje seleccionable a partir de 1 V… 1000 V Limite el indicador Los resultados de la medida almacenables en flash externo del USB conducen Interfaz RS232 (USB y Ethernet opcionales) Sistema de visualización:digital Movilidad / instalación:de sobremesa

40 years of UV experience and consistent product development enable the optimal performance and intuitive operation of the RMD Touch laboratory radiometer. This incorporates the latest technologies such as capacitive touch displays, precision ADCs, data storage, remote update capability and much more. This makes the RMD Touch one of the most powerful multichannel radiometers on the market with superior features such as highest accuracy, reliability and modular extensions. The RMD Touch allows simultaneous measurement of multiple sensors, recording of irradiance and dose. Each sensor channel contains a high-precision 24 bit ADC and a multi-stage amplification to achieve a wide dynamic range of up to 7 orders of magnitude. The measurement of all channels is performed simultaneously. Sensor spec:24 bit, full digital Sensor connections:2 Display:capacitive touch display Dimensions:185 x 251 x 100 mm Mains connection:100 - 240 V, 50/60 Hz

The RMD radiometer is one of the latest developments from Opsytec Dr. Gröbel GmbH. This easy-to-use radiometer is based on more than 30 years of experience in all areas of irradiation and illuminance measurement. It features a wide dynamic range and extremely low noise. For this purpose, the sensor already contains a multi-stage amplification, an extremely precise analog-to-digital converter and a temperature sensor. The memory contained in the sensor contains all sensor identifications and the calibration history. This allows several ultraviolet sensors and visible sensors to be used on the Radiometer RMD. A wide range of sensors is available for a wide variety of production and control processes. Two sensors can be read out simultaneously. Sensors for the evaluation of erythema-weighted radiation and multi-channel sensors are also available. The measurement data are clearly displayed on the graphic display. Spectral range:UVA, UVA+, UVBB Resolution:0,001 µW/cm² Dimensions:Ø 40 mm, h 35 mm Weight:160 g Connecting cable:2 m

Xenon excimer lamps enable new, resource-saving and more efficient production possibilities. They are used in the field of surface treatment for matting, cleaning, surface activation or to save photoinitiators. For this purpose, the narrow-band spectrum around 172 nm is usually used to irradiate under inert gas conditions. Then the high photon energy is sufficient to split almost all organic compounds. The measurement of 172 nm (VUV) is an important component for process control and optimization. With the tinyTracker 172 we offer a calibrated band radiometer which is suitable for use in an inert atmosphere. The tinyTracker 172 is absolutely calibrated and measures the irradiance and irradiation dose of xenon excimer lamps directly at 172 nm. Due to its particularly flat design, the tinyTracker172 can be guided through the irradiation channels of UV belt dryers and other industrial equipment. Measuring range:0-200 mW/cm² Resolution:12 bit Recording time:up to 3 hours Sampling frequency:1 - 100 Hz, adjustable Photo detektor:GAP

The industrial spectroradiometer iSR900 is an autonomous and high-resolution measuring system for fast and precise measurements in the UV, visible spectral range and IR. The spectroradiometer consists of an array spectrometer without moving parts and a silicon detector with 2048 pixels. The spectral resolution is 0.44 nm. The iSR900 is combined with an SMA-905 quartz light guide and our radiometric measuring heads for irradiance and illuminance measurement. The iSR900 is factory calibrated to PTB. A DAkkS test in our accredited laboratory is optionally available. The iSR900 thus allows accurate spectroradiometric measurements for the evaluation of irradiance and illuminance. The low-scatter design achieves high sensitivity in the UV range. Control and data evaluation take place in the iSR900 so that only a USB or RS485 / RS232 interface is required for the evaluation. With trigger input and output the iSR900 is ideal for automated measurements. Trigger:I/ O, rear connection Dimensions:250 x 320 x 100 mm Gewicht:3,5 kg Supply voltage:230 V, 50 Hz Power:< 25 W

UV-Referenzmessgeräte sind zur Überprüfung von UV-Anlagensensoren zur Trinkwasserdesinfektion vorgesehen. Das MUV 2.4 WR ist als robustes Handgerät ausgeführt und kann mit Referenzsensoren nach DVGW- Arbeitsblatt W 294-3 und ÖNORM M5873 ausgestattet werden.

The German Technical and Scientific Association for Gas and Water (DVGW) and the Austrian standardization committee have defined the requirements for UV water disinfection systems with UV low-pressure lamps in DIN 19294-1:2020-08. This also specifies the design, function and opening angle of DVGW reference radiometers. The previous technical rule W294-3 and ÖNORM 5873 continue to apply to devices for drinking water disinfection with medium-pressure lamps. The sensors are inserted into a pressurized water-tight measuring window tube, which enables simple and reproducible replacement of the sensors. With an aperture angle of 160°, our sensors are suitable for precise radiometric measurement of UVC irradiance in UV water disinfection systems. We offer these with reference radiometer RMD. The RMD as DVGW reference radiometeris one of the latest developments from Opsytec Dr. Gröbel GmbH. Spectral range:240 - 290 nm Measurement range, typ.:0 - 200 W/cm² Resolution:0,001 µW/cm² Dimensions:Ø 20 x 60 mm Weight:160 g

Fuente de calibración de la alta precisión DIGISTANT® para el voltaje, la corriente y los termopares, para la prueba y la calibración exactas y para el control de procesos, de la exactitud básica el 0.005%, del interfaz RS232 o IEEE488 CARACTERÍSTICAS Corriente de alta precisión y ± de la fuente del voltaje 52 mA, ± 30 V Opción: ± 22 mA, ± 60 V La simulación de la precisión para todo el termopar convencional mecanografía (opcional) Límite el 0.003% Rdg del error. El estándar con RS232 y el IEEE488 interconectan, USB y Ethernet (opcionales) “FREGADERO actual” La unidad de la calibración de la precisión combina alta exactitud, estabilidad de largo plazo baja de la deriva, de poco ruido y superior con funcionalidad múltiple y la operación simple. El almacenaje múltiple de las rampas, de Δ+/Δ-, y setpoint hace la operación del dispositivo más fácil para el usuario. Magnitud física:de temperatura, tensión, corriente Opciones:de proceso,de precisión

The radiometer RM-12 is a precise, hand-held device for measuring irradiances and illuminances. Due to the sensor-integrated electronics, different sensors for UV and visible spectral ranges can be measured with the respective sensors. Sensors evaluating biological effects of irradiation are also available. The integrated diffuser serves to provide the cosine correction that is necessary with non-perpendicular irradiation. The sensors are calibrated with traceability to the PTB; after being calibrated, they are supplied with a factory calibration certificate. Repair and spare parts service is, of course, available for many years. The sensors can be supplied with different measuring ranges. APPLICATIONS: Measurement of UV lamps, UV LEDs, and light sources Controll of UV irradiation Measurement of job security due to artificial optical radiation Photometric measurements Measuring range:0 - 199 mW/cm² Resolution:10 lx Dimensions:160 x 85 x 35 mm Weight:300 g Battery lifetime:up to 50 h

This radioactivity detector is the one to choose if you need to make precise measurements concerning protection of the environment and our health. Using this radioactivity detector you can detect the slightest X and GAMMA rays plus BETA particles in the environment and food (e.g. game animals). It beeps for each detection and an acceleration of these beeps indicates how close the radioactive source is. Model: Audible Radiometer FY-II Origin Code: 009

Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization creat

Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization creat

Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization creat

This radioactivity detector is the one to choose if you need to make precise measurements concerning protection of the environment and our health. Using this radioactivity detector you can detect the slightest X and GAMMA rays plus BETA particles in the environment and food (e.g. game animals). It beeps for each detection and an acceleration of these beeps indicates how close the radioactive source is. Model: Audible Radiometer FY-II Origin Code: 009