Produktai skirti pvc vario kabelis (2)

For lighting and power circuits while stationary laying in electric devices, for inflexible installation in electric devices, machinery, mechanisms and industrial machines for rated voltage up to 450V (for networks 450/750V) frequency up to 400 Hz or permanent voltage 1000V. Is used for laying in empty places of steel pipes and construction structures, where there are not frequent bends of the conductor. The conductor is flame retardant. The aluminum cores with section 1.5-4.0 mm2 inclusive are produced with PPV-1 and PPV-3 with 3,4 class flexibility, according to the standard Gost 22483-2012. Number of cores in the conductor 2,3Label attached to wooden drum or bundle (coils). An inscription is made on the cable: JSC Sakcable, cable brand, metric. STANDARD:GOST 6323-79 26445-85 31947-2012 FOREIGN ANALOGUE:GOST 6323-79 26445-85 31947-2012 | NYIFY IEC 60227 / DIN VDE 0250 Installation temperature:not less than -150C

The non-halogen elevated fire hazard cable is designed to transmit and distribute electricity to stationary devices at nominal voltages of 0.660 kW and 1 Hz at 50 Hz. In the air, with anti-ultraviolet radiation protection and where there is no danger of mechanical damage of the cable, as well as for low corrosion activity in the soil (in the trenches), but in a protective tube.Aluminum wires with a cross section of 2.5-50 mm2 are made with single wire first class flexibility up to 70-240 mm2 with twisted multi-wire wires with 2nd class flexibility, standard IEC60228: 2004. At the request of the customer, it is allowed to make multi-wire cross section 16: 50. The number of cores in the cable: 1,2,3,4,52,5-16mm2 450 m 25-70mm2 300 m 95-240mm2 200 m In case of delivery coils (“bundle”), the construction length is agreed with the customer. It is allowed to make cables of different construction lengths. STANDARD:DIN VDE 0276-604 FOREIGN ANALOGUE:31996-2012 Installation temperature:not less than -150C