Produktai skirti produkttesteris (6)

Without any doubt, the smallest high-pressure leak detector on the market up to 100 bar. Specially adapted for automatic, semi-automatic or manual operation, the F520HP has a comprehensive range of standard specifications as well as a complete package of options and accessories. Catheters, refrigeration parts, oil radiators, HP tubes and pipes, valves, hydraulic brakes Differential pressure decay leak measurement 1 measurement range (ΔP) F.S. : 5000 Pa 32 programs Languages (English + other one) Electronical pressure regulator 4 MPa Mechanical pressure regulator 8 MPa Weight :Approximately 7 Kg Dimensions:(WxHxD) 250x136x390 mm

Without any doubt, the smallest high-performance leak tester on the market. Specially adapted for automatic and semi-automatic test machine, the F26 Speed has a full range of specifications at a very competitive price. Blister, sachet, pneumatic and hydraulic fitting Leak testing by pressure drop (until 10 bar) Measurement ranges : (ΔP) P.E.: 500 Pa to 50 kPa 8 programs Networking several modules (via CAN) Set up on line via USB port Compact enclosure (h 163 x l 88 x P 85) Flexible mounting styles Integrated fill and dump valves Flexible communication formats : RS232, USB, Ethernet (For printer and PC) Environment : ROHS standard (Restriction of the use of certain Hazardous Substances) Weight :around 1.5Kg Voltage:24 V DC / 1.6 A Operating:+ 10°C at + 45°C Storage:0°C at + 60°C

Associated with the remote control RC6 mini, the F405 is an entry level leak detector allows basic leak testing at a very competitive price. AUTOMOTIVE Shock absorbers, gearboxes, tank caps, carburettors, non return valves, cylinder heads, filters, radiators, seals, cylinders, engine oil and water circuits.. DOMESTIC APPLIANCES Bottles, percolators, cookers, steam irons, ovens, washing machines… MEDICAL Catheters, dialysis equipment, micropipettes, plastic taps, drain bags, syringes, valves… PACKAGING Aerosol cans and valves, trigger pumps, ink cartridges, cosmestic bottles, food sachets Weight :5 Kg Dimensions:(WxHxD) 240x137x120.7 mm Operating:+0°C to +45°C (+32 °F to 113 °F) Storage:0°C to +60°C (32 °F to 140 °F)

On the basis of its well proven concept of production line QC Testers, ATEQ has developed a new leak tester designed for the specific requirements of high volume production of plastic parts. This instrument is used for the detection of localized moulding faults, insufficient membrane thickness, perforations, etc. This instrument has also proven to be effective on testing pouch battery cells. The IONIQ is based on discharge current measurement and is able to detect defects up to of 10µm. Battery pouch cells, plastic bottle caps, plastic packaging, plastic coverings The IONIQ measures the current flowing between a patented charged probe and a ground plate placed under the part to be tested. The IONIQ uses the % of the nominal voltage (which reflects the discharge current), measured on the part as PASS/FAIL level. In a PASS situation (fig 1) : No hole, no weak part, the IONIQ measures a high %. The measured voltage and the nominal voltage are virtually equal. Operating:+ 10°C at + 45°C Storage:0°C at + 60°C Dimensions:H x L x P = 136 x 250 x 255 mm Weight:8 kg

Without any doubt the smallest high pressure leak detector on the market. The F600 HP is equiped with the technical innovations of the 6 series and allows high pressure leak testing at a very competitive price. Catheters, refrigeration parts, oil radiators, HP tubes and pipes, valves, hydraulic brakes Pressure decay leak testing from 5 to 1000 kPa Range of measurement from 20 to 175 bar 128 programs Mechanical regulation 2 MPa/ 5 MPa/ 10.0MPa/ 17.5 MPa Electronic regulation 4 MPa Flow units (sccm, mm3/s, cm3/s, cm3/min, cm3/h…) Desensitized Test and others, depending on your applications Weight :7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

On the basis of its well proven concept of production line QC Testers, ATEQ has developed a new leak tester designed for the specific requirements of high volume production of plastic parts. This instrument is used for the detection of localized moulding faults, insufficient membrane thickness, perforations, etc. This instrument has also proven to be effective on testing pouch battery cells. The IONIQ is based on discharge current measurement and is able to detect defects up to of 10µm. Battery pouch cells, plastic bottle caps, plastic packaging, plastic coveringsThe IONIQ measures the current flowing between a patented charged probe and a ground plate placed under the part to be tested. The IONIQ uses the % of the nominal voltage (which reflects the discharge current), measured on the part as PASS/FAIL level. In a PASS situation (fig 1) : No hole, no weak part, the IONIQ measures a high %. The measured voltage and the nominal voltage are virtually equal. Operating:+ 10°C at + 45°C Storage:0°C at + 60°C Single phase:50/60 Hz – 45 W Weight:9.4 kg Dimensions:H x L x P = 250 x 250 x 60 mm