Produktai skirti priekai (11)

Questa unità è stata progettata e costruita per la protezione di postazioni di lavoro mobili o permanenti sul campo di battaglia o nella difesa di obiettivi sensibili, trasportabile per via aerea in quanto di peso e dimensioni limitate. Destinata alla protezione degli operatori armati. Fronte inclinato di 30 gradi con slot di 8 mm x 70 mm adatti per agganciare i pannelli laterali. Dimensioni dei pannelli laterali 1000 x 1000 mm base 900 mm ipotenusa 970 mm. Certificazione: Banco Nazionale di Prova per le Armi da Fuoco Portatili e per le Missioni Commerciali: - Prot. N°22/BAL-AG/vp 23 febbraio 2010. Resistori balistici per proiettili 5.56 x 45 SS109 + 7.62x51 Nato. Peso: 27,00 kg Ganci: SNAP A BAYONET Materiale: POLYETHYLENE HD

TABLETOP VACUUM PACKAGING MACHINE DZ 400 T WITH INCREASED TANK Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. The tank of increased sizes with rounded lid allows the packaging of products with maximum height of 180 mm and the vacuum pump with a capacity of 20 m3/h ensure high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 370 Chamber dimensions:mm 400x370x120/180(H) Vacuum pump:20 m³/h Working cycle:about 30 sec

The F series front mower, which is available with cutting widths of 1200, 1500, 1800 and 2350 mm, dumping side or rear position, can also be used with 12 to 60 HP tractors. This mower is available in 21 versions with a power takeoff of either 540 or 1000 rpm, although a 2000 rpm PTO can be requested for models F12 - F15 - F18 - F24. All 21 versions are fitted with axially adjustable hitches so that the mower can be attached to any tractor that has a front hydraulic lift system. The same features of versatility, simplicity, safety, toughness and ease present in the TC series also apply to the F series mowers. Front Mower with Turbine Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.

Struttura che permette di ampliare il fabbricato pre-esistente creando una copertura supplementare. Possono essere utilizzati in modo permanente o temporaneo, in questo caso è possibile poi ricollocarli in un’altra area del suolo aziendale.

TABLETOP VACUUM PACKAGING MACHINE DZ 260 T Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. This machine, with compact size, low consumption and a very short cycle time, is suitable for both the alimentary than for technical articles. The tank of modest size and the vacuum pump with a capacity of 8 m3/h. ensure high productivity. Sealing bars length:mm 260 Chamber dimensions:mm 385x282x100(H) Vacuum pump:8 m³/h Working cycle:about 30 sec

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data. Sealing bars length:mm 450 Chamber size:mm 466x405x117H Nr. gas nozzles for bar (only in the version with gas):2 Vacuum pump:20 m³/h Cycle time :24 seconds Air re-entry time:8 seconds

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP). Number of sealing bars:2+2 front-rear Sealing width:mm 3x2 (two 3 mm parallel seals) Length of sealing bars:mm 820 Chamber dimensions:mm 910x800x225 Useful chamber dimensions:mm 820x650x180H pump:100 m³/h Working cycle:25- 30 seconds

Unbreakable and professional containers used in food service and industrial. Colour Grey. Available with or without front door. Stackable and suitable for forks lift. Available in industry version (industrial gray) or food version (RAL 7001). Ideal for textile industry, pharmaceutical industry, metalworking, plastics processing and food industry. Easy to clean, does not absorb odors and moisture. Storable outdoors. Available with feet, runners or wheels. Are movable with pallet trucks and forklift. * Door Dimensions 782x40x236 mm h The Model 700 PLUS is available in: - Technical Grey - Food RAL 7001 - Standard without door opening (SP version) - With door opening (version PC) The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory. External dimensions:1200x1000x830 h mm Internal dimensions:1200x920x655 h mm Max capacity:680 dm3 Max load:600 kg Maximum range overlap:4000 Kg

CHAMBER VACUUM PACKAGING MACHINE DZ 410 T - VERTICAL Vacuum packaging machine for packaging in vertical envelopes containing coffee, rice, tea, powder products, fluid products, etc. The machine is built in stainless steel (AISI 304) and equipped with an electronic volumetric sensor with 3 programs digital panel. The compact size chamber and the vacuum pump with a capacity of 20 m3/h. ensure high productivity. Also available with filter for packing powdery products such as hazelnuts flour, milk powder and products with similar characteristics. The filter must be requested at time of order. The packaging machine is equipped with a painted wheeled support. Max thickness bag mm. 0.20 (0.8 total with bellows). By equipping the machine with jigs realized according to the specific dimensions of the product to be packaged, it is possible to obtain squared packs. The templates are not included with the machine. Sealing bar length:mm 400 Sealing width:mm 10 Chamber size:mm 400 x 85/180 x 350H Maximal product height:mm 300 Vacuum pump:20 m³/h Cycle Time:about 25 sec.

VACUUM PACKAGING MACHINES DZ 500 T - BIG CHAMBER Bench vacuum packaging machine with front sealing bar, made ​​of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that assures a steady control of vacuum. The bigger chamber with rounded lid allows the packaging of products with max. eight of mm. 180 and the vacuum pump from 20 m3 / h. ensures high productivity. Also available DZQ with gas inlet valve (modified atmosphere). Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 470 Chamber width:mm 500 Chamber length:mm 460 Chamber eight :mm 120/180 Vacuum pump:20 m³/h Working cycle:ca. 30 sec

Even better performance SIMPLER MAINTENANCE The MULTICUT has been awarded the European Community certificate of approval and complies fully with EC Machine Directives. Maintenance problems are trimmed to a minimum as the MULTICUT requires no more than the standard cleaning and checking operations for a traditional lawnmower. Since the MULTICUT can be folded each part of the device is easy to access, making maintenance even simpler. Before carrying out maintenance operations, always stop the tractor and release the universal joint; maintenance instructions are set out in the Operating, Maintenance and Safety Manual� which accompanies each Caroni device. MULTICUT: INCREASED PRODUCTIVITY The MULTICUT is manufactured using state-of-the-art design criteria and highly modern construction techniques. The device consists of three rear lawnmowers with vertical axes, of the TC series - width 1200, 1500, 1800 and 2400 mm - mounted on a single chassis which can be connected up to any tractor: from 30 up to 75 HP. A perfect combination of mechanical, hydraulic and production features which, at speeds of 10/15 km/h, reduces the number of cutting operations, work times and labour costs while making each lawnmower three times as efficient. Reduced operating times also result in lower fuel consumption and less pollution from the tractor. All these features are combined in a device which weighs from 950 up to 1300 kg. With an operating range from 3.60 up to 5.65 m, MULTICUT increases productivity and cuts the time and costs of maintaining sports fields, parks, fairways and large grassed areas in general, sectors for which it was specially designed. EXECELLENT PERFORMANCE ON ANY SURFACE Drive is transmitted by means of a universal joint to a fourwaybox and then by means of three more universal jointsto the three cutting devices which operate independently. Each lawnmower in anchored to the supporting structure individually by means of oscillating arms and is equipped with “extra wide� wheels. Since the lawnmowers operate independently they are able to follow the contours and irregular features of the land, cutting the grass evenly and accurately to heights of between 25 and 100 mm. EASY TO TRANSPORT The MULTICUT has a three cylinder hydraulic system designed to fold the three lawnmowers vertically when work is complete, reducing the width of the device to just 2.00 m - 2.20 m - 2.40 m, depending on the model. This makes it extremely easy to transport the MULTICUT by road. Two extra wide tyres and a hydraulic stop on each device increase safety and stability. Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost – not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.