Produktai skirti performatys (307)

Axialkolben von Herzog Hydraulik bieten eine präzise und effiziente Lösung für die Energieübertragung in Hydraulikanlagen. Diese Bauelemente sind in der Lage, auch unter hohen Druck- und Belastungsbedingungen eine konstant hohe Leistung zu erbringen. Sie eignen sich besonders für mobile Maschinen, industrielle Anwendungen und Systeme mit hohem Leistungsbedarf.

BIEGLO offers PAI tubes from different PAI types, Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF), where each type is best suitable for a specific application. The unique performance of polyamide-imide (PAI) is the result of being transformed from a thermoplastic to a cross-linked thermoset during an extended curing process. Our PAI is processed by experienced engineers and offeres the best possible values a PAI product can have and it's suitable for many applications as gears, rollers, plasma chamber hardware and wafer contact fixtures.

Besonders leistungsfähiges und funktionelles Piqué- Poloshirt für Herren. Besonders leistungsfähiges und funktionelles Piqué- Poloshirt aus weichem, durch den Polyester-Anteil besonders pflegeleichtem und strapazierfähigem HAKRO®- Performance-Materialmix mikralinar®. Nackenband, 3-Loch-Knopf leiste mit extrahaltbar vernähten, bruchsicheren Knöpfen „Ton in Ton“ und einem Ersatzknopf. Leasingkoller zur einfachen Kennzeichnung und zwei praktische Aufhängebänder im Saum - für die problemlose Bearbeitung in der gewerblichen Wäscherei. Gewebtes HAKRO®-Performance-Necklabel aus hochwertigem Kettsatin mit ultraschallgeschnittenen Bandkanten für angenehmen Tragekomfort und HAKRO®-Performance-Flaglabel in der linken Seitennaht. • Material: Piqué aus 50 % Baumwolle und 50 % Polyester Artikelnummer: 816 Größen: XS-6XL Stoffgewicht: 200 g / m² Waschtemperatur: 60 °C

Product Features: • The MDF3 three phase drive filters are suitable for inverter / servo drives and high noise environments. • The MDF3 range of three phase high performance industrial filters are available in 8 current ratings, from 8 Amps to 150 Amps at three phase 440V, and have stud termination. • Primarily designed for use with motor drive inverters they are suitable for all applications without a neutral conductor where leakage current is not a limiting factor i.e. permanently wired-in equipment (3 wire systems). • All products are RoHS compliant and approvals held include UL and cUL.

Product Features: • The MIF range are single phase multi-stage filters offering very high performance, designed for use in a variety of industrial applications. • Single phase, 250V, these filters allow compliance with industrial and residential limits when screened motor cable is used. • Typical applications include motor inverter drives with long (above 50M) motor cable. • The MIF range of filters are compact and cost-effective and offer flexibility in mounting options ensuring minimal panel space solutions. Current ratings from 3 Amps to 23 Amps. • All products are RoHS compliant and approvals held include UL and cUL.

Product Features: • The IHF4 range is three phase and neutral filter offering medium performance and low leakage for general purpose filtering. • The IHF4 range are three phase and neutral high performance filters, available in seven current rating from 8 Amps to 100 Amps. • All products are RoHS compliant.

BIEGLO can organize the production of your PEEK finished parts according to your drawing and material specifications. We are happy to advise you and rely on parts of our international network for productions of parts. Due to the integration of raw material sources (granulate and powder) up to the application technology we can recommend you the suitable processing of PEEK. PEEK finished parts can be produced for a variety of applications, for examples, compressor valve plates, fittings or screws. Finished parts can be produced by turning, injection molding, CNC machining or in the 3D printer.

BIEGLO can offer a variety of PEEK compounds, both as raw material and as semi-finished product. PEEK compounds can be supplied with carbon or glass fibers as well as with PTFE and tribological compounds with a mix of PEEK, PTFE, carbon fibers and graphite. In addition, PEEK color compounds can also be supplied. PEEK-CF30 impresses with its outstanding mechanical and thermal properties. The carbon fibers provide increased stiffness, creep resistance and better thermal conductivity. Furthermore, PEEK-CF30 has exceptional resistance to hydrolysis in boiling water or hot steam. PEEK-GF30 impresses with its improved mechanical strength and high rigidity. In addition, the creep resistance and dimensional stability is increased. The glass fibers provide increased life in high static and high temperature applications over a long period of time. PEEK-GF30 does not dissolve in common solvents and resists high gamma rays.

BIEGLO offers PAI sheets from different PAI types, Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF), where each type is best suitable for a specific application. The unique performance of polyamide-imide (PAI) is the result of being transformed from a thermoplastic to a cross-linked thermoset during an extended curing process. Our PAI is processed by experienced engineers and offeres the best possible values a PAI product can have and it is suitable for many applications, such as gears, rollers, plasma chamber hardware and wafer contact fixtures.

The Dexnyl PEEK shrink tube provides a protective layer for sensitive or critical components as an alternative to traditional materials. PEEK shrink tubes are particularly effective in environments where extreme heat or cold, high pressure, or chemicals, water, or dielectric interference endangers wires and electrical components. BIEGLO can offer PEEK shrink tubing with a diameter of 0.965mm to 9.957mm. PEEK is a thermoplastic polymer that is commonly used instead of metal or other types of plastics. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals.

BIEGLO can offer PEEK granulates in various viscosities. It can be used for a variety of applications: semi-finished product extrusion, injection molding, compounding, filament and film extrusion, coatings. Our CoPEEK 012G is high viscous, unreinforced PEEK for extrusion and injection molding, thus it is the standard type for the production of semi-finished products. CoPEEK 021G is medium viscous, unreinforced PEEK for injection molding. But it can also be extruded for the production of films and filaments. CoPEEK 085G is low viscous, unreinforced PEEK for the extrusion of films and filaments. It is also used as the basis for compounds and composites. CoPEEK 125G is very low viscous, unreinforced PEEK for the injection molding of thin-walled, complex components. It is also suitable for the production of highly filled compounds.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide sheets. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. In line with different requirements of the industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide sheet can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries.

BIEGLO offers recycled PEEK as granules. This R-PEEK is produced in Europe and offers a very good cost position compared to virgin material. At the same time, BIEGLO is doing something good for the environment in terms of sustainability. PEEK as a high performance thermoplast keeps its properties throughout the recycling process. PEEK-residues do not end up in an incineration plant, but are being recycled in a quality assured way. Besides selling recycled PEEK as granules, we are always interested to buy your sorted, clean and dry PEEK wastes in all forms. If you have any PEEK waste, please do not hesitate to contact us.

Product Features: • With very high differential and common mode attenuation, Roxburgh's RES90 filter range is will suited to both everyday and less common applications. • The multi-stage ECM filter has been developed for easy chassis ratings and they are readily available from UK stock. • Featuring excellent attenuation performance this series is suitable for noisy applications where increased filter performance is required. • All products are RoHS compliant and approvals held include UL and cUL.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000 product line semi-finished products. Our polyimide semi-finished products meet the highest demands of various industries, such as the aerospace or the automotive industry. The polyimide semi-finished products are available as solid rods or sheets. Tubes can be produced as short, direct formed pieces. Polyimide semi-finished products are available in various compounds, for example with PTFE or graphite for better coefficients of friction. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.

The Dexnyl PEEK tubes can be an intelligent solution for round and hollow pieces. They are mostly extruded or compression molded. But BIEGLO GmbH offers also injection molded PEEK tubes and spin casting PEEK tubes in long and short length and special thin wall tubes. Parts made-up of our PEEK offer excellent hydrolysis and electrical insulation. PEEK is the ideal replacement for metal and other plastics due to its high temperature resistance of up to 240°C , excellent chemical and wear resistance. Our range of PEEK tubes starts with 25mm up to 1.480mm (external diameter); 20mm up 1.300mm (internal diameter). Our PEEK tubes are also available made of compounded PEEK.

Product Features: • The RES80 multi-stage EMC filters from Roxburgh have been designed to deliver high performance for a variety of uses. • This includes for both common applications and for those situated in noisy environments where increased filter performance mat be mandatory. • Featuring high differential mode and high common mode attenuation, this series has good low frequency attenuation. • These general purpose filters are suitable for a broad range of applications including noisy environments where increased filter performance is required. • All products are RoHS compliant and approvals held include UL and cUL.

Polyetherimide is an amorphous thermoplastic and part of the polyimide family. It has excellent dimensional accuracy over a wide temperature range and has low thermal expansion. BIEGLO's sales portfolio for PEI contains rods from 8mm to 100mm. The most common applications of PEI are in the food and beverage industry, pharmaceutical and electronics industry as well as precision engineering.

Product Features: • The IHF range is a single phase general purpose filter offering medium performance and meets the IEC requirements of 3.5mA leakage current. • All products are RoHS compliant.

BIEGLO offers high temperature resistant and flame retardant fibers. The application is similiar to meta-aramid, but PI fibers have its own advantages. The long-term service temperature is 260℃. The decomposition temperature is 560℃. The LOI is 38%, it means it is non-flameble fiber. The Dexnyl Polyimide fibers are applicable in many products, but they are used best in niche-applications with extreme standards for the material: 1- FR Protective clothing: e.g. military fligth clothing, flame resistand underwear, firefighter uniform etc. 2- High temperature filtration and industrial insulation: e.g. dedusting filtration for cement factories, steel or powder plants, air filtration for painting area operated at more than 300°C . 3- Composite material: taking advantage of insulation, flame retardance and high emperature resistance, chopped fiber can be used as reinforced material.

Polyetherimide has recently joined the BIEGLO portfolio. Our sales portfolio for PEI contains rods and sheets from 8mm to 100mm diameter. As well as, PEI thin films below 1mm thickness. The maximum width is 1200mm for sheets and film. Polyetherimide is an amorphous thermoplastic and part of the polyimide family. It has excellent dimensional accuracy over a wide temperature range and has low thermal expansion. PEI is naturally flame retardant and has a fire rating of UL94 V-0. The most common applications of PEI are in the food and beverage industry, pharmaceutical and electronics industry as well as precision engineering.

Product Features: • The RES70 selection are multi-stage EMC filters which are manufactured to supply high differential mode, high common mode and high frequency attenuation. • Available from UK stock, they are appropriate for everyday applications as well as applications situated in considerably noisy environments. • Designed for quick and easy chassis mounting, these general purpose filters are suitable for a broad range of applications where increased filter performance is required. • All products are RoHS compliant and approvals held include UL and cUL.

Sustainability is an important part of BIEGLO GmbH where we assist our customers to get rid of the scrap their processing produces, try to support the environment and foster the economic sustainability. Based on the specialization of our company, we focus only on high performance polymers; especially PEEK. We collect scraps and meet our recycling partners needs. We have a wide range of PEEK scraps in differnt forms, such as shavings, regrind and small parts. If you are interested in buying those scraps, please do not hesitate to contact us. On the other hand, if you have PEEK scraps that you want to sell, kindly send us the details of the material.

BIEGLO offers PAI rods from different PAI types, Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF), where each type is best suitable for a specific application. The unique performance of polyamide-imide (PAI) is the result of being transformed from a thermoplastic to a cross-linked thermoset during an extended curing process. Our PAI is processed by experienced engineers and offeres the best possible values a PAI product can have and it is suitable for many applications as gears, rollers, plasma chamber hardware and wafer contact fixtures.

PEEK is the ideal replacement for metal and other plastics due to its high temperature resistance of up to 240°C , excellent chemical and wear resistance. The Dexnyl PEEK rods of BIEGLO offer resistance to elevated temperatures, radiation and chemicals. Their dimensional stability and mechanical strength are second to none. Our PEEK has an excellent hydrolysis and electrical insulation. BIEGLO offers natural, colored and tribological modified PEEK with superior sliding properties and abrasion resistance. We offer a wide range of PEEK rods diameter starting at 6mm to 100mm. Our PEEK rods are also available made of compounded PEEK.

Product Features: • The KMFV is a range of 600V, high performance three phase industrial filters and are designed for industrial applications within harsh environments such as the petrochem industry. • The KMFV range of high voltage, three phase industrial mains filters and are designed for use in industries such as mining and renewable energy. • Current ratings 6A to 320A for use on a 600V power supply (Canada). • Current ratings 420A to 820A for use on a 690V power supply. • This range is three phase from 6 Amps to 820 Amps and is economically priced, lightweight, side mounting and has IP rated terminal blocks. • Designed to meet UL 1283 and EN 133200 these filters will enable end users to meet EN 55011A and EN 55022B legislation. • All products are RoHS compliant and approvals held include UL and cUL.

The Dexnyl PEEK filaments of BIEGLO is a high performance product made by melt spinning. Semicrystalline PEEK has high tensile strength, it is exceptionally resistant to chemicals and can withstand extreme temperatures. These features ensure a longer product life, lower maintenance costs, less machine downtime and wider material design options compared to steel or aluminum parts. PEEK filaments can be used very well for 3D printing. Printing with PEEK requires 360 ° C to 380 ° C. So far, only specially modified 3D printers are able to achieve this heat. Sliced ​​woven and/or unidirectional fibers significantly reinforce matrix material and are a popular additive for composites. PEEK filaments are also used on musical instruments, rackets and wide or narrow woven straps, filtration mesh fabrics and sewing threads. Due to their low weight and high temperature resistance, PEEK filaments are popular in many other industies, such as automotive and aerospace industries.

BIEGLO offers polyimide tubes with inner diameters starting from 2mm and going down to 100 micron. Our polyimide tubing are mainly used in the medical industry for catheters or neurovascular applications. Dexnyl polyimde tubings are extruded from thermoplastic polyimides and offer excellent pushability and tractability as well as ultra-smooth surface and transparency. USP class VI (USP 6) compliance is of course a given.

Reparatur - Adamol 1896 Hochleistungsschmierstoff 300ml

PAI material considers the most efficient fusible thermoplastic in terms of temperature resistance, chemical resistance and mechanical stress. Its mechanical strength at 205 °C surpasses many engineering plastics at room temperature. BIEGLO offers PAI finished parts of the following types: Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF). Each type is best suited for a particular application. Polyamide-imide can be used for a lot of appliations like gears, rollers, plasma chamber hardware and wafer contact fixtures. In addition, PAI material is ideal for high-temperature thermal insulators, burn-in test sockets, valve seats, fasteners, mechanical connections, rollers, labyrinth seals, drive wheels, valve plates, vanes and support gaskets.