Produktai skirti performatys (171)

The versatile model Saturn S6 is our best-selling and most extensible rotary ring stretch wrapper. The film reel is mounted on the ring, which rotates concentrically to the load going up and down depending on the wrapping cycle, so the load remains static. • High performance: Up to 120 pallets / h • Guaranteed savings of stretch film: 300 % film pre-stretching; 1 m of film becomes 4 m • Finishes without tails of film due to our efficient cut and welding device • Electronic and self-adjusting tension control depending on the profile of the load • Capable of applying bands (strips) at any height of the load • Possibility of wrapping at ground level • Possibility of applying efficient dustproof and rainproof wrappings

For industrial production and process technology The micro annular gear pump mzr-11507 is equipped with tungsten carbide rotors and bearings. Hard construction material and precision manufacturing techniques guarantee excellent dosage precision, high service life and wear resistance for low volume dosage of non-lubricating liquids. Driven by a high-power three-phase AC-motor the pump has a compact design and covers the flow range from 29 ml/min to 1152 ml/min. The mzr-11507 is suitable for continuous delivery and discrete dosage of low and high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel High-power motor AC-motor for use with external frequency... Flow rate:29 - 1,152 ml/min Displacement volume:192µl Differential pressure range:0 – 140 bar (2,030 psi) Maximum inlet pressure:10 bar (145 psi) Ambient temperature range:-20 ... +40 (-4 ... +104 °F)°C Liquid temperature range:-5 ... +60 °C (-20 ... +120 °C *) (+23 ... +140 °F (-4 ... +248 °F)) Viscosity range:0.3 – 150,000mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:150 - 6,000 rpm Fluid connection:3/8" NPT internal thread, lateral optional 3/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, alloy C276 (2.4819); static seals: FPM, optional: EPDM, FFPM Motor:AC-motor, IEC-Size 056, 4 poles, IP 55, rated voltage 240/400 V, rated frequency 100 Hz, 240 W Temperature protection:thermal contact (NC) Dimensions (L x W x H):303 x 110 x 171 mm Weight:approx. 9,300 g Remarks:* with optional heat insulation or heating module, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-2505 covers the flow rate range 0.0015 - 9 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2505 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.0015 - 9 ml/min (min. 10 µl/h *) Smallest dosage volume:0.25µl Displacement volume:1.5 µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 25,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor, 24 V DC, 44 W Controller:integrated 16-bit, microcontroller Interface:0-10 V, RS-232, 1 digital input/output Dimensions (L x W x H):140 x 45 x 65 mm Weight:approx. 780 g Remarks:*depending on accessories, Customized solutions on request.

Hydraulische Hebegeräte Serie JH-G plus EX JUNG Hebe- und Transporttechnik stellt innovative Maschinenheber her, die sowohl handlich als auch stark sind. Sie bieten Ihnen eine hohe Produktqualität bei praxisgerechtem, täglichem Einsatz. Eine hohe Schlagfestigkeit des Hydraulikhebers ist garantiert. Unsere Produktserie JH-G plus EX ist ohne integrierte Pumpeneinheit. •Reduzierte Reibung durch Gleitschuhe, die jeweils in ihrem Sitz beweglich sind. Es steht in jedem Betriebszustand eine erheblich größere Fläche zur Kraftübertragung zur Verfügung, als bei herkömmlichen Geräten. Vorteile dadurch sind geringer Verschleiß der Führungen und ein höherer Wirkungsgrad. •Niedrige Wartungskosten durch abnehmbare Hubeinheit und austauschbare Gleitschuhe. •Extrem leicht bei hoher Leistung durch hochwertige Materialien und innovative Konstruktion. •Die schwenkbare Lasche gewährleistet jederzeit eine optimale Anpassung an die Last. Stets sichere Standfestigkeit, auch in angehobenem Zustand. Traglast:20 t Hubhöhe:190 mm

The space-saving models Saturn S2 and Saturn S4 are stretch wrapping machines featuring a rotary ring design where the load remains static while the film reels rotate around the load. • Medium performance: Up to 70 pallets / h • Guaranteed savings of stretch film: 300 % film pre-stretching; 1 m of film becomes 4 m • Finishes without tails of film due to our efficient cut and welding device • Electronic and self-adjusting tension control depending on the profile of the load • Capable of applying bands (strips) at any height of the load • Possibility of wrapping at ground level • Possibility of applying efficient dustproof and rainproof wrappings Type:Rotary ring stretch wrapper

For industrial production and process technology The micro annular gear pump mzr-4005 covers the flow rate range 0.006 - 36 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-4005 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 143 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.006 - 36 ml/min (min. 10 µl/h *) Smallest dosage volume:1µl Displacement volume:6µl Differential pressure range:0 – 50 bar (725 psi) Maximum inlet pressure:5 bar (73 psi), (10 bar (145 psi) *) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 25,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):143 x 45 x 65 mm Weight:approx. 800g Remarks:* depending on accessories, Customized solutions on request.

Due to the individual speed control, the Roots pumps of the innovative HiLobe® series offer a nominal pumping speed range of 520 - 2,100 m³/h and can be perfectly adjusted to customer-specific requirements. In general, Roots pumps need a backing pump adapted to the gas flow and which is suitable for the application in order to operate. pumping speed range:520 – 2,100 m³/h Integral leak rate:1 · 10^-6 Pa m³/s Nominal power at maximum speed:2 – 3.5 kW

Der vollautomatische Drehring-Stretchwickler Saturn S8 ist unser schnellster Ringwickler für maximale Produktionsprozesse. Die Folie wird mittels Drehring um die Ladung gewickelt, während das Packgut statisch bleibt. • Maximale Leistung: Bis zu 160 Paletten / h • Garantierte Einsparung von Strechfolie durch 300 % ige Folienvorstreckung, d. h. aus 1 m Folie werden 4 m • Vollflächige Verschweißung der Folie am Ende des Wickelzyklus ohne abstehende Folienreste durch unser effizientes Schneid- und Verschweißsystem • Elektronische Regelung von Geschwindigkeit und Anlegespannung der Folienabwicklung je nach Profil des Packguts • Banderolenbildung oder Folieneinschnürung in jeder Höhe am Packgut möglich • Wickeln auf Bodenhöhe möglich • Zuverlässige staub- und regendichte Verpackung

For industrial production and process technology The micro annular gear pump mzr-2905 covers the flow rate range 0.003-18 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2905 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.003 - 18 ml/min (min. 10 µl/h *) Smallest dosage volume:0.5 µl Displacement volume:3 µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 50,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):140 x 45 x 65 mm Weight:approx. 780 g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-4605 covers the flow rate range 0.012-72 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-4605 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 143 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.012 - 72 ml/min (min. 10 µl/h *) Smallest dosage volume:2µl Displacement volume:12µl Differential pressure range:0 – 50 bar (725 psi) Maximum inlet pressure:5 bar (73 psi) Viscosity range:0.3 - 50,000 mPas Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Precision CV:< 1% (Coefficient of variation CV) Fluid connection:inlet 1/8" NPT internal thread, lateral Velocity range:1 - 6,000 rpm Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):143 x 45 x 65 mm Weight:approx. 800g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-7205 covers the flow rate range 0.048-288 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-7205 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable even for low viscosity liquids Compact dimensions length 156 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.048 - 288 ml/min Smallest dosage volume:30µl Displacement volume:48µl Differential pressure range:0 – 40 bar (580 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 – 50,000 (1,000,000 *)mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:1/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor, 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):156 x 50 x 69 mm Weight:approx. 1080g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-11508X1 is equipped with tungsten carbide rotors and bear-ings. Hard construction material and precision manufacturing techniques guarantee excellent dosage precision, high service life and wear resistance for low volume dosage of non-lubricating liquids. Driven by a high-power DC-motor the pump has a compact design and covers the flow range from 0.19 ml/min to 1152 ml/min. The mzr-11508X1 is suitable for continuous delivery and discrete dosage of high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel Dynamic precision motor brushless DC-motor with encoder Compact dimensions length... Flow rate:0.19 - 1,152 ml/min Smallest dosage volume:100µl Displacement volume:192µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:10 bar (145 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) (+23 ... +140 °F (-4 ... +302 °F)) Viscosity range:0.3 – 50,000 (100,000 *)mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:3/8" NPT internal thread, lateral; optional 3/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, alloy C276 (2.4819); static seals: FPM, optional: EPDM, FFPM Motor:brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm Positioning:1000 counts per turn, analog hall sensors Interface:motor cable length 2 m, 6-pole plug for motor winding, 12-pole plug for encoder and hall sensors Dimensions (L x W x H):265 x 100 x 109 mm Weight:approx. 4,500 g Remarks:* with optional heat insulation or heating module, Customized solutions on request.

Die platzsparende Modelle Saturn S4 ist ein Drehring-Stretchwickler, bei dem die Ladung stehen bleibt, während sich die Stretchfolienrolle um das Packgut dreht. • Mittlere Leistung: bis zu 70 Paletten / h • Garantierte Einsparung von Strechfolie durch 300 % ige Folienvorstreckung, d.h. aus 1 m Folie werden 4 m • Vollflächige Verschweißung der Folie am Ende des Wickelzyklus ohne abstehende Folienreste durch unser effizientes Schneid- und Verschweißsystem • Elektronische Regelung von Geschwindigkeit und Anlegespannung der Folienabwicklung je nach Profil des Packguts • Banderolenbildung oder Folieneinschnürung in jeder Höhe am Packgut möglich • Wickeln auf Bodenhöhe möglich • Zuverlässige staub-und regendichte Verpackung Typ:Drehring Stretchwickler

For industrial production and process technology The micro annular gear pump mzr-2905 covers the flow rate range 0.003-18 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures, compact design and an integrated microcontroller. The pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-2905 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High differential pressures achievable also for low viscosity liquids Compact dimensions length 140 mm, including controller Broad viscosity range methanol, water, solvents, adhesives, grease, gel Low pulsation delivery, low... Flow rate:0.003 - 18 ml/min (min. 10 µl/h *) Smallest dosage volume:0.5 µl Displacement volume:3 µl Differential pressure range:0 – 30 bar (435 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 - 50,000 mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:inlet 1/8" NPT internal thread, lateral Wetted parts:graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM Motor:DC-servomotor 24 V DC, 44 W Controller:integrated 16-bit microcontroller Interface:0–10 V, RS-232, 1 digital input/output Dimensions (L x W x H):140 x 45 x 65 mm Weight:approx. 780 g Remarks:* depending on accessories, Customized solutions on request.

Aussergewöhnliche Performance bei Säureanwendungen für die chemische Industrie. Es bietet gute mechanische Eigenschaften bei mittleren Temperaturen und Pressungen. Es ist eine wirtschaftliche Alternative in der Verwendung von modifizierten PTFE Materialie KLINGERtop-chem 2005 hat eine sehr gute Beständigkeit bei starken Säuren und ist geeignet für einen grossen Einsatzbereich in der chemischen Industrie.

Die platzsparenden Modelle Saturn S2 und Saturn S4 sind Drehring-Stretchwickler, bei denen die Ladung stehen bleibt, während sich die Stretchfolienrolle um das Packgut dreht. • Einstiegsleistung: Bis zu 45 Paletten / h • Garantierte Einsparung von Strechfolie durch 300 % ige Folienvorstreckung, d. h. aus 1 m Folie werden 4 m • Vollflächige Verschweißung der Folie am Ende des Wickelzyklus ohne abstehende Folienreste durch unser effizientes Schneid- und Verschweißsystem • Elektronische Regelung von Geschwindigkeit und Anlegespannung der Folienabwicklung je nach Profil des Packguts • Banderolenbildung oder Folieneinschnürung in jeder Höhe am Packgut möglich • Wickeln auf Bodenhöhe möglich • Zuverlässige staub- und regendichte Verpackung Typ:Drehring Stretch Wickler Funktionmodus:automatischer

For industrial production and process technology The micro annular gear pump mzr-7208X1 covers the flow rate range 0.048-288 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures. Driven by a high-power DC-servomotor the pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-7208X1 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1% at low volumes High differential pressures achievable even for low viscosity liquids Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel Compact dimensions length 211 mm Dynamic... Flow rate:0.048 - 288 ml/min Smallest dosage volume:30µl Displacement volume:48µl Differential pressure range:0 – 120 bar (1,740 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 – 1,000,000mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:1/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, 316L; static seals: FPM, optional: EPDM, FFPM Motor:brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm Encoder:1000 counts per turn, analog hall sensors Dimensions (L x W x H):211 x 84 x 93 mm Weight:approx. 2,100g Remarks:* depending on accessories, Customized solutions on request.

For industrial production and process technology The micro annular gear pump mzr-7208 covers the flow rate range 0.048-288 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures. Driven by a high-power DC-servomotor the pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-7208 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1% at low volumes High differential pressures achievable even for low viscosity liquids Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel Compact dimensions length 211 mm Dynamic... Flow rate:0.048 - 288 ml/min Smallest dosage volume:30µl Displacement volume:48µl Differential pressure range:0 – 150 bar (2,175 psi) Maximum inlet pressure:5 bar (73 psi) Liquid temperature range:-5 ... +60 °C (-20 ... +150 °C *) +23 ... +140 °F (-4 ... +302 °F *) Viscosity range:0.3 – 1,000,000mPas Precision CV:< 1% (Coefficient of variation CV) Velocity range:1 - 6,000 rpm Fluid connection:1/8" NPT internal thread, frontal Wetted parts:graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM Motor:brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm Encoder:500 counts per turn, type HEDL 5640 Dimensions (L x W x H):211 x 84 x 93 mm Weight:approx. 2100g Remarks:* depending on accessories, Customized solutions on request.

Hydraulische Hebegeräte Serie JH G plus JUNG Hebe- und Transporttechnik stellt innovative Maschinenheber her, die sowohl handlich als auch stark sind. Eine hohe Schlagfestigkeit des Hydraulikhebers ist garantiert. Unsere Produktserie JH-G plus ist mit integrierter Pumpeneinheit. •Reduzierte Reibung durch Gleitschuhe, die jeweils in ihrem Sitz beweglich sind. Es steht in jedem Betriebszustand eine erheblich größere Fläche zur Kraftübertragung zur Verfügung, als bei herkömmlichen Geräten. Vorteile dadurch sind geringer Verschleiß der Führungen und ein höherer Wirkungsgrad. •Niedrige Wartungskosten durch abnehmbare Pumpeneinheit und austauschbare Gleitschuhe. •Extrem leicht bei hoher Leistung durch hochwertige Materialien und innovative Konstruktion. •Die schwenkbare Lasche gewährleistet jederzeit eine optimale Anpassung an die Last. Stets sichere Standfestigkeit, auch in angehobenem Zustand. •Lasche im Gesenk geschmiedet, dadurch extrem schlagzäh. Traglast:6 t Hubhöhe:140 mm

Hydraulische Hebegeräte Serie JH G plus JUNG Hebe- und Transporttechnik stellt innovative Maschinenheber her, die sowohl handlich als auch stark sind. Eine hohe Schlagfestigkeit des Hydraulikhebers ist garantiert. Unsere Produktserie JH-G plus ist mit integrierter Pumpeneinheit. •Reduzierte Reibung durch Gleitschuhe, die jeweils in ihrem Sitz beweglich sind. Es steht in jedem Betriebszustand eine erheblich größere Fläche zur Kraftübertragung zur Verfügung, als bei herkömmlichen Geräten. Vorteile dadurch sind geringer Verschleiß der Führungen und ein höherer Wirkungsgrad. •Niedrige Wartungskosten durch abnehmbare Pumpeneinheit und austauschbare Gleitschuhe. •Extrem leicht bei hoher Leistung durch hochwertige Materialien und innovative Konstruktion. •Die schwenkbare Lasche gewährleistet jederzeit eine optimale Anpassung an die Last. Stets sichere Standfestigkeit, auch in angehobenem Zustand. •Lasche im Gesenk geschmiedet, dadurch extrem schlagzäh. Traglast:20 t Hubhöhe:190 mm

Hydraulische Hebegeräte Serie JH G plus JUNG Hebe- und Transporttechnik stellt innovative Maschinenheber her, die sowohl handlich als auch stark sind. Eine hohe Schlagfestigkeit des Hydraulikhebers ist garantiert. Unsere Produktserie JH-G plus ist mit integrierter Pumpeneinheit. •Reduzierte Reibung durch Gleitschuhe, die jeweils in ihrem Sitz beweglich sind. Es steht in jedem Betriebszustand eine erheblich größere Fläche zur Kraftübertragung zur Verfügung, als bei herkömmlichen Geräten. Vorteile dadurch sind geringer Verschleiß der Führungen und ein höherer Wirkungsgrad. •Niedrige Wartungskosten durch abnehmbare Pumpeneinheit und austauschbare Gleitschuhe. •Extrem leicht bei hoher Leistung durch hochwertige Materialien und innovative Konstruktion. •Die schwenkbare Lasche gewährleistet jederzeit eine optimale Anpassung an die Last. Stets sichere Standfestigkeit, auch in angehobenem Zustand. •Lasche im Gesenk geschmiedet, dadurch extrem schlagzäh. Weitere Eigenschaften:tragbares,hydraulisches Produktanwendungen:für Container,Schwerlast