Produktai skirti perdavimo daviklis (13)

Ultraschallsensoren erfassen über Schallwellen berührungslos und verschleißfrei eine Vielfalt von Objekten. Es spielt keine Rolle, ob das Objekt durchsichtig oder undurchsichtig, metallisch oder nicht metallisch, fest, flüssig oder pulverförmig ist. Unsere Ultraschallsensoren werden in nahezu allen Bauformen, Reichweiten, Erfassungswinkeln und Ausgangsvarianten geliefert. Die Geräte sind überwiegend mit Temperaturkompensation, Störunterdrückung bei Fremdgeräuschen und einer Verbindungsleitung zur Selbstsynchronisation ausgestattet.

Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via EtherCAT. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. In the model series TRK absolute encoders, the EtherCAT interface is integrated according to IEC 61158-2 to 6 and encoder profile CiA DSP406. To achieve the SIL2 level, the TRK/S3 contains a redundant sensor system and additional internal monitoring mechanisms as well as safe communication via the FSoE (failsave over EtherCAT) protocol. The FSoE protocol is implemented according to the Safety over EtherCAT specification ETG.5100 version 1.2.0. Inkremental or absolute:Absolute Interface:EtherCAT FSoE Single- or Multiturn:Multiturn, Singleturn Design:58mm, 64mm, 65mm, 66mm, 90mm, 105mm, 125mm Special feature:SIL2/PLd Housing material:Aluminium, Stainless steel 1.4305, Stainless steel 1.4404 Code type:Binary Measuring range:10 measuring lengths in metres for the draw wire version. Possible values: 6 and 10,4096 revolutions Profile:FSoE, SIL2-certified Electrical connection:Kx: Cable, x: Length in m, M12 connector

Die IMG40A sind robuste Drehimpulsgeber mit Synchroflansch, die sowohl mit Gewindeschrauben als auch Spannpratzen montiert werden. Bis 3600 Impulse; 40mm Durchmesser, 6mm Achse, typisch IP67 Die IMG40A sind robuste Drehimpulsgeber für den industriellen Einsatz mit Synchroflansch, die sowohl mit Gewindeschrauben als auch Spannpratzen montiert werden können. Verschiedene Impulszahlen bis 3600 Impulse, 40mm Durchmesser, 6mm Achse, typisch IP67 Betriebsspannungen DC 5V oder 10-24V (auch 10 Volt Versorgungsspannung bei TTL-Kompatibilität), bis 3 Signal-Kanäle, bis 6 Ausgangssignale (3 + 3 invertierte Signale) verschiedene Stecker oder Kabelabgänge möglich Sonderbauformen auf Anfrage

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via Profibus-DP. Robust housing manufactured from seawater-proof aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal - sensor circuit consisting of ASIC with Hall elements - electrical connections via the connecting cap with threaded cable connections. The absolute encoders are designed for direct connection to the PROFIBUS-DP. The interface is implemented with the SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality in accordance with Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanicallly and electrically compatible with the electro-optical encoder CRD. Inkremental or absolute:Absolute Interface:PROFIBUS Single- or Multiturn:Singleturn Design in mm:58mm, 64mm, 65mm, 66mm, 90mm, 105mm, 125mm Housing material:Aluminium, Stainless steel 1.4305, Stainless steel 1.4404 Code type:Binary Measuring range:10 measuring lengths in metres for the draw wire version.Possible values: 6 and 10, 4096 revolutions Profile:Class 2 according to encoder profile No. 3.062

ransmission multitours absolue jusqu'à 4096 tours - Sortie des données ainsi que paramétrage et diagnostic via EtherCAT. Boîtier robuste en aluminium résistant à l'eau de mer ou en acier inoxydable - Arbre en acier inoxydable - Roulement à billes avec bague d'étanchéité d'arbre - Circuit capteur constitué d'ASIC avec éléments Hall - Raccordement électrique par connecteur M12 ou sortie de câble. Les capteurs rotatifs de la série TRK disposent de l'interface EtherCAT selon CEI 61158-2 à 6 et du profil de capteur CiA DSP406. En plus des capteurs redondants, le TRK/S3 contient des mesures de surveillance internes supplémentaires pour atteindre le niveau SIL2 ainsi qu'une communication sûre via le protocole FSoE (Failsafe over EtherCAT). Le protocole FSoE est conçu conformément à la spécification Safety over EtherCAT ETG.5100 Version 1.2.0. Incrémental ou absolu:Absolu Interface:EtherCAT FSoE Monotour ou multitours:Monotour, Multitours Diamètre du boîtier:58mm, 64mm, 65mm, 66mm, 90mm, 105mm, 125mm Caractéristique spéciale:SIL2/PLd Matériau:Aluminium, Inox 1.4305, Inox 1.4404 Type de code:Binaire Plage de mesure:10 longueurs de mesure en mètres pour la version tréfilée. Valeurs possibles : 6 et 10, 4096 tours Profil:FSoE, certifié SIL2

Une liaison mécanique positive entre l'arbre du client et l'arbre du capteur garantit que l'aimant de l'arbre du capteur reproduit exactement la rotation de l'arbre du client. Le TBN mesure un tour, soit un maximum de 16 384 pas. Le capteur rotatif TRN atteint une plage de mesure allant jusqu'à 4096 tours avec le réducteur absolu suiveur. Les valeurs de position et de vitesse (PDO - Process Data Object) sont émises via le protocole CANopen. Incrémental ou absolu:Absolu Monotour ou multitours:Multitours Interface:CANopen Diamètre du boîtier:58mm Matériau:Aluminium, Inox 1.4305, Inox 1.4404 Résolution:4096 pas/tour 12 bit, 8192 pas/tour 13 bit, 16384 pas/tour 14 bit Type de code:Binaire Plage de mesure:4096 tours Trajet du signal:CCW, CW Profil:CANopen C3 standard, version profil 4.0.2, CANopen catégorie 3 selon DIN EN 13849

A positive-locking mechanical connection between the cus-tomer’s shaft and the sensor shaft ensures that the magnet in the sensor shaft precisely reflects the rotation of the cus-tomer’s shaft. With the TBN model, one rotation (i.e. max. 16,384 steps) is recorded.With the subsequent absolute transmission, the TRN shaft encoder reaches a measuring range of up to 4096 rotations. The position and speed values (PDO - Process Data Object) are output via the CANopen protocol. Inkremental or absolute:Absolute Interface:CANopen Single- or Multiturn:Multiturn Design:50mm Housing material:Aluminium 3.2315, Stainless steel 1.4305, Stainless steel 1.4404 Resolution:4096 steps/revolution 12-bit, 8192 steps/revolution 13-bit, 16384 steps/revolution 14-bit Code type:Binary Measuring range:4096 revolutions Profile:Standard CANopen C3, Profil No. 4.0.2

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integrated absolute multiturn gearbox for the acquisition of revolutions - optional potting against water jets (IP 69K) - electrical connections via round plug M12x1 or lead exit. Inkremental or absolute:Absolute Interface:SSI Single- or Multiturn:Multiturn Design:50mm Housing material:Aluminium, Stainless steel Flange and shaft:Synchroniser flange Resolution:4096 steps/360°<) Code type:Binary, Gray (optional) Measuring range:4096 revolutions Electrical connection:Cable 1m, Device connector M12 x 1

A positive-locking mechanical connection between the cus-tomer’s shaft and the sensor shaft ensures that the magnet in the sensor shaft precisely reflects the rotation of the cus-tomer’s shaft. With the TBN model, one rotation (i.e. max. 16,384 steps) is recorded.With the subsequent absolute transmission, the TRN shaft encoder reaches a measuring range of up to 4096 rotations. The position and speed values (PDO - Process Data Object) are output via the CANopen protocol. Inkremental or absolute:Absolute Interface:CANopen Single- or Multiturn:Multiturn Design:42mm Housing material:Aluminium 3.2315, Stainless steel 1.4305, Stainless steel 1.4404 Flange and shaft:Synchro flange, shaft 6mm Code type:Binary Measuring range:4096 revolutions Profile:Standard CANopen C3, Profil No. 4.0.2

A positive-locking mechanical connection between the cus-tomer’s shaft and the sensor shaft ensures that the magnet in the sensor shaft precisely reflects the rotation of the cus-tomer’s shaft. With the TBN model, one rotation (i.e. max. 16,384 steps) is recorded.With the subsequent absolute transmission, the TRN shaft encoder reaches a measuring range of up to 4096 rotations. The position and speed values (PDO - Process Data Object) are output via the CANopen protocol. Inkremental or absolute:Absolute Single- or Multiturn:Multiturn Interface:CANopen Design:58mm Housing material:Aluminium, Stainless steel 1.4305, Stainless steel 1.4404 Resolution:4096 steps/revolution 12-bit, 8192 steps/revolution 13-bit, 16384 steps/revolution 14-bit Code type:Binary Measuring range:4096 revolutions Signal path:CCW, CW Profile:CANopen category 3, DIN EN13849, Standard CANopen C3, Profil No. 4.0.2

Recording of the angular position and revolutions by means of Hall sensors - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 and 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. To achieve the SIL2 level, the TRT/S3 contains addtitional internal monitoring mechanisms as well as safe communication via PROFIsafe. The PROFIsafe protocol is implemented according to the PROFIisafe Profile for Safety Technologie version 2.4 (PNO Order No. 3.192) Inkremental or absolute:Absolute Interface:PROFIsafe over PROFINET Single- or Multiturn:Singleturn Design:58mm, 64mm, 65mm, 66mm, 105mm Special feature:SIL2/PLd Housing material:Aluminium, Stainless steel Profile:PROFIsafe, SIL2

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 - 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. Setting the address, baud rate or terminating resistances is not necessary. A name, which is stored in the absolute encoder's non-volatile memory, is assigned via the PROFINET controller to address the device. Inkremental or absolute:Absolute Interface:PROFINET Single- or Multiturn:Multiturn, Singleturn Design:58mm, 64mm, 65mm, 66mm, 90mm, 105mm, 125mm Housing material:Aluminium, Stainless steel 1.4305, Stainless steel 1.4404 Resolution:4096 steps/360°<), 8194 steps/360°<) Measuring range:4096 revolutions, Revolutions length in meter for draw wire version Profile:Standard, PROFINET

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integrated absolute multiturn gearbox for the acquisition of revolutions - optional potting against water jets (IP 69K) - electrical connections via round plug M12x1 or lead exit. Inkremental or absolute:Absolute Interface:SSI Single- or Multiturn:Multiturn Design:42mm Housing material:Aluminium, Stainless steel Flange and shaft:Synchroniser flange Resolution:4096 steps/360°<) Code type:Binary, Gray (optional) Measuring range:4096 revolutions Electrical connection:Cable 1m