Produktai skirti membrana 8040 (4)

Armaproof Membrane Anti-cracking waterproof membrane to be laid before laying ceramic, natural stone and parquet coverings. In combination with the other products of the I.T.W.S (Integral Terrace Waterproofing System) system, it creates perfect and long-lasting waterproofing even on cracked, not perfectly cured or with possible vapor tensions due to residual humidity coming from the substrates. Crack bridging, vapor management and sound absorption are the distinctive characteristics of this innovative waterproof membrane. Armaproof Membrane is an innovative waterproof membrane formed by the union of two different non-woven fabrics, coupled with a polyethylene membrane. The deformability under stress of the membrane (crack-bridging) allows the compensation of potential tensions from hygrometric shrinkage and thermal deformation of the substrate, thus facilitating the management of contraction joints present in the substrate. The non-woven fabric of the upper surface (light color), in polypropylene, and that of the lower surface (dark color), in polypropylene/polyester, allow optimal adhesion of our cementitious adhesive Osmokoll Mono (certified adhesive C2TES1), recommended both for gluing the membrane to the substrate and for gluing tiles above the membrane. The special configuration, together with its material conformation, promote extremely resistant and durable chemical and mechanical adhesion of our Osmokoll Mono glue, among other things with glue consumption reduced by 30-40% compared to other systems on the market. The management of the steam potentially present in the support is also facilitated, which finds an outlet through the fibres of the non-woven fabric and the porosity of the adhesive. The special shape of the membrane is also highlighted in the extremely limited thickness, just 1.8 mm, which makes it extremely easy to handle, making it easier to install. Its sound-absorbing characteristics complete the characteristics of the Armaproof Membrane membrane, making it unique in its sector. The waterproofing system is completed with the Elastotex 120 Cloth elastic band, which is used across the area where two membranes meet and in the perimeter parts between the wall and the floor, in contact with columns, pillars, architectural elements protruding from the installation surface, drains, etc., gluing using Osmokoll Mono. Waterproofs any surface, both old and new, even if cracked or subject to dimensional movements caused by hygrometric shrinkage or thermal deformations. Waterproofing of internal and external surfaces with compensation of vapour pressure before laying ceramic tile, natural stone and parquet coverings for commercial/industrial uses (warehouses, shopping centres, food industries, canteens) and for civil uses (balconies, terraces, flat roofs). Large surfaces such as flat roofs or roof slabs. Check the adequacy of the mechanical performance and the surface consistency of the laying substrate. Check the anchoring and cleaning of old flooring by eliminating all potentially detaching substances, dirt, surface patinas. Check that the movements of the contraction joints and cracks in the substrate are ≤ 1.5 mm. Respect the structural movement joints (the membrane is able to compensate for the movements caused by the hygrometric shrinkage of the screeds, up to a maximum of 1.5 mm, but is not suitable for supporting the movements expected in the structural joints). In these cases, interrupt the membrane and connect its edges to the structural joint. Check with a carbide hygrometer that the residual humidity of the screed is less than 8%. In outdoor applications, in the event of rain in the days before laying the membrane, check with a carbide hygrometer that at least the first 2 cm of the top of the screed have humidity < 4%. Do not apply in the presence of stagnant water puddles. Use 1 m² of Armaproof Membrane for each m² of surface to be covered. Packaging: Roll of 15 m2 UM: €/m2

Die 1,02 mm starke Firestone PondGard® EPDM Teichfolie wird für den Einsatz in Gartenteichen produziert. Aufgrund der Zusammensetzung und des Herstellungsverfahrens ist bei Firestone PondGard® Teichfolien die Verträglichkeit für Wasserlebewesen und -pflanzen gewährleistet und durch das britische Water Research Centre zertifiziert. Firestone PondGard® EPDM Teichfolie 1,02 mm ist somit die erste Wahl bei der Teichabdichtung. Speziell für Garten-, Koi- und Schwimmteiche aus synthetischem Kautschuk hergestellt, weist PondGard® 1,02 mm EPDM Teichfolie eine hohe Dehnbarkeit sowie eine extrem hohe UV- und Ozonbeständigkeit auf. Die Materialeigenschaften erlauben Lebenserwartungen von über 50 Jahren laut SKZ (Süddeutsches Kunststoff-Zentrum, Würzburg). Gleichzeitig zeichnet sich die Firestone PondGard® EPDM Teichfolie durch geschmeidiges Verlegen auch bei tiefen Temperaturen bis zu -45 °C aus. Produziert in Bahnenbreiten bis zu 15,25 Metern Breite und 30,5 Metern Länge. Teichfolie:EPDM Dichtungsbahnen:PVC

DERIVADOS DEL FLUOR is a European leader in the manufacture of high purity fluoroboric acid, due to a long-standing track record in the production and delivery of this product across the world. Our supply principles for HBF4 focus on quality, service, and expertise: Our high purity synthetic fluoroboric acid has very low level of heavy metals, compared to by product options. Thanks to its very low impurity level, our Fluoroboric Acid is ideal for the most demanding applications. We have a highly flexible filling system, which enables us to offer a wide range of packaging solutions to our customers. Jerricans and IBCs are our standard formats. Our continuous production and robust inventory, together with our logistic service, make it possible to offer just-in-time delivery to our customers’ facilities across the world. Chemical Formula:HF Description:Corrosive liquid Appearance:Colourless liquid Identification CAS No:240-898-3 Identification EU No:16872-11-0 Identification UN No:1775 Purity:Fluoroboric Acid 49-51% Packaging:Jerricans, drums, IBCs Transport ADR:8 C1-II Transport RID:8 C1-II Transport IMDG:8 Transport OACI:8

Beschaffung von Bauteilen