Produktai skirti kompresorius (19)

More info More info More info More info More info 40bar PET Compressors Select the machine The AF 40 bar Piston Oil Free PET compressor Package Turn-key installations designed to meet the most stringent standards and conditions to ensure round-the-clock operation. Complete solutions from 225 to 3200 m³/H, electric motors from 45 to 550 kW. Features Benefits Intercoolers and separators Features Hot galvanized connection piping to aftercooler inlet. Air temperature indicator on connection piping. Spring loaded safety valve on separator upper head. Air pressure indicator on separator body. Air temperature indicator on separator body. Drain valve and automatic condensate trap on separator lower head. Benefits Optimized compressed Air Quality maximum. Cooling Efficiency at each compression stage. Air Dryer Features Stainless steel flexible connections from the galvanized air receiver to the 40 bar air dryer. Stainless steel dryer with integrated 1 micron filter, dew point alarm...

Schraubenkompressoren

Compressor P The COMPRESSOR P oils are specially formulated for the lubrication of reciprocating air compressors, as well as vacuum pumps. The special additives provide the Compressor P oils excellent anti-wear and anti-corrosion properties and thus provide reliable protection for the machine. COMPRESSOR P oils have a very good demulsibility, are hardly foaming and therefore resulting in high efficiency of the compressor or pump. Benefits: Prevents the formation of carbon deposits on the pistons, valves and in the pressures air lines Good resistance against oxidation High flashpoint Good resistance against wear and corrosion

Stainless steel refrigerated 40 bar air dryer with the plate heat exchanger, moisture separator, interconnecting piping and flanges, all made from stainless steel to prevent corrosion. Refrigerant gas is ozone friendly R134a or R404a. Dust pre-filter providing 1 micron filtration and integrated in the air dryer. Dew Point Alarm -option- displayed on compressor control panel and on dryer unit to help maintain the quality and security of the air supplied for blow moulding. Condenser is air cooled, but water-cooling is available on request for hot areas over 40°C. Coolant compressor is fully hermetically sealed with current and thermal overload protection. Pressure dew point is 3°C with 35°C compressed air inlet temperature. See our certifications

New high pressure pet range of compressors See our brochure Higher performance Model Capacity FAD m3/h Capacity CFM Motor Power kW L4 790 465 132 L4A 960 565 160 L5 1200 706 200 L5A 1500 883 250 L6 1760 1036 280 L6A 1940 1142 315 L6B 2170 1277 355 Capacity FAD, Free Air Delivery according to ISO 1217. 20 -40 bar nominal pressure, equipment up to 44 bar. Air quality according to ISO 8573-1 2.4.1 See our certifications. New design and development Increased internal volume in the interconnecting pipework with reduced pulsation losses. New separator and intercooler design, increased efficiency. New piston / Cylinder assemblies with reduced losses. New piston rings with optimized design, increased output capacity. Optimized package and coating, integrated equipements; drains, oil cooler… More volume for same power Increased High Pressure air capacity FAD. Decreased specific shaft power. Technical modification without prior notice.

Electrical connections between motor, control cabinet air dryer and water pump. Specific electric motors : protection degrees, IP23 or IP55. Efficiency class : IE1, IE2, IE3. Different optional voltage and frequencies, standard is 400V/3/50HZ or 60HZ +/- 10%. Other voltage is on request : 380V/3/50Hz or 60Hz, 575V/ 60Hz… Soft starter SIEMENS SIKOSTART. Standard is Star Delta starter, the optional soft starter is integrated in the main electrical control cabinet. The compressor is equipped with an electrical pre-lubrication oil pump for the crankcase. Air-conditioning for electrical control cabinet for inside temperatures exceeding 40 for soft starter & 45°C for standard electrical cabinet. The frequency inverter electrical cabinet is protected against high temperature through a different selection of internal components (powerblock…).

Complete HP range, capacities from 225 to 3200m³/h and more… See our brochure Model Capacity FAD m³/h Capacity CFM Speed rpm Motor Power kW MC244 225 132 600 45 CE 2A 312 184 485 55 CE 2B 390 230 650 75 CE 24A 510 300 570 90 CE 24B 600 353 670 132 CE 46 XS 750 441 340 132 CE 46 S 870 512 400 160 CE 46 A 1080 636 500 200 CE 46 B 1320 777 500 250 CE 6 1700 999 425 315 CE 68 A 2100 1236 480 355 CE 68 S 2300 1354 460 400 CE 68 B 2600 1529 520 450 CE 68 BES 2600 1529 430 450 CE 680 A 2900 1706 480 500 CE 680 B 3200 1872 540 550 Low speed and low energy consumption High energy efficiency : Longer component life, less friction, low speed : 340 rpm to 670 rpm. Less wearng parts as described above. Easy access on the machine for maintenance. Reliability and easy maintenance. Less time for maintenance, equals more. Easy and quick installation due to the use of anti-vibration mounts, no specific foundation is required : low investment costs for installation. Lowest maintenance...

OIL FREE 2 stage PISTON LOW PRESSURE Air Solutions More info More info More info More info More info More info More info Move your cursor over a bullet to get more info AF Piston Compressors : Simple and Robust DESIGNED FOR LONG LIFE and RELIABILITY Piston Rods are made of a high resilient stainless steel and chromium plated to provide a hard wearing surface. Cross heads The ratio between the connecting rod length and crank radius (nearly 5) and the large pressure lubricated area of the crosshead and guides ensures optimum life. Connecting rods The white metal connecting rod main bearings are inherently long life items. All bearings are pressure lubricated by a gear driven pump. Crankshaft Is supported by two self aligning bearings having two rows of generously dimensioned rollers to ensure perfect alignment. Connecting rods The white metal connecting rod main bearings are inherently long life items. All bearings are pressure lubricated by a gear driven pump. Cross heads The...

Electrical control panel for starting and capacity control of : the compressor, the air dryer, the cooling water system with pump when supplied. Cabinet made of 2mm enamelled plate, protection to IP54 hermetically sealed and containing: Main circuit breaker and fuses. Star delta starter for compressor. Fuses for auxiliary circuits. Safety device to prevent compressor starting against load. Microprocessor description overview Capacity control with fully automatic start and time delayed stop of the compressor. Monitoring of air an oil temperatures on each stage, as well as oil and air pressures. Safety controls. Memorised defect system. Service intervals for maintenance. Details of loaded and total running hours. Simple keypad operation. Multi language message displays. RS485 data communication line for remote control or monitoring. Diagnostics, reprogram, Analog, digital configuration… new model available 2009 sept. Main Selection Monitoring Start control Pressure...

HP- 40 bar air receiver options Standard (horizontal on the base-frame or vertical ) the HP- 40 bar air receiver is hot galvanised with accessories, including safety valve and Bekomat drain system. Depending on the location and country, the air receivers have to comply with the local codes and certifications. All Codes and certifications are available : CE-PED, ASME VIII, CRN for Canadia , TR CU suiting to Russia, Kazakhstan, Belarus, SELO code in China, South Korea 40 bar certification. NR13 for Brazil… HP – 40 bar piping and accessories 40 bar piping between the compressor, HP air receiver and the HP dryer flanges, supports, safety warrant and mounting accessories, shut off gates /40 bar stop valve is included in standard. Also available : – accessories for specific HP connection installation before the dryer ; elbow… HP- 40 bar air Dryer options Stainless steel condenser, dew point alarm, Bekomat draining system. Water cooled condenser is recommended for ambient temperatures...

UNE GAMME COMPLÈTE DE COMPRESSEURS SANS GRAISSAGE 8 bar et 10 bar La série OPC (Oil free Piston Compressor) est une gamme complète de compresseurs bi-étagés à pistons « oil free », sans graissage. Vitesse basse, deux étages, compresseurs à pistons, 2 cylindres refroidis par eau. Des pressions intermédiaires de 6 à 15 bar ( 8 et 10 bar) sont destinées à différents secteurs d’activité industrielle : alimentaire et boissons, pharmaceutique, industrie chimique ou automobile… Nos références à travers le monde sont continuellement en demande d’équipements bi-étagés 8 et 10 bar en complément à nos compresseurs 20-40 bar pour l’industrie de l’embouteillage PET. Applications pour lesquelles la fiabilité, la durée de vie, l’efficacité énergétique et une maintenance sous contrôle resteront toujours des critères déterminants pour le choix d’un compresseur à air sec.

L Range L Range infos CE Range CE Range infos

Scope of delivery Heat Recovery System 90°C including : Specific double cooler 2 nd and 3 rd stage. Special design for 1 st stage intercooler. Internally adapted water circuit. The compressor runs with a smaller water pump with frequency inverter,”VSD”. The compressor runs with a smaller separate water cooling system. External Heat Exchanger Kit for easy connection to the customer system. Features & benefits Features based on L 5 model /200 kW. Temperature : 30-35°C water in – between 85-90°c water out. Power : heat recovered @ 40 bar on load is ca.160 kW = ca.80% of the shaft power. Water : Available quantity of water for Heat Recovery is ca. 2 m³/hour water flow for L5 model. Due to HR a smaller separate cooling system is used for the complete compressor system. One year operation, 6000 running hours @ 0.05 € / kW Heat = 48.000 € savings. Scope of delivery Heat Recovery System 40°C including : External skid Heat Recovery System 40°C with stainless steel plate...

Spare parts kit. Optional spares kit are offered. Spare parts kit for 1st necessity, including one High Pressure valve of each type, a complete set of gasket and specific electrical device, sensors… Spare parts kit for 1st maintenance. Special tools. Transport & logisitics : Trucking, sea freight, FCA , FOB, CIF any optional prices following to INCOTERMS 2010. Packings. Packings are specifically engineered and prepared to suit a long-lasting protection of the compressor and its equipment throughout overseas shipping or simply road trucking. Packing consists of : thermo-welded protections to seaworthy wooden crate 4C, also preparation for container : ‘stuffing-lashing-securing’ – 40’’ High Cube and 20’’ Dry containers… Start up and commissioning. Installation & mounting supervising ,commissioning and training. Prior to all start up a commissioning PiCK list and commissioning preparation check list is communicated in order to facilitate the off-loading and positioning of the..

The 40 bar oil free PET compressor range from 225 m³/H to 3200 m³/H. AF suits to the basic ISO 8573 Class 1. rule, and in addition, offers a 40 bar stainless stell refregerative air dryer with 3°C dew point. The dryer is equipped with dew point alarm, integrated 1µ filter and integrated automatic draining system. Stainless steel condenser and optional additional active carbon filter will complete our standard 40 bar PET packages to supply to best air quality on the PET market. The 40 bar compressed air package is mounted on a base plate equipped with anti-vibration mountings and includes: electric motor – from 55 to 550 kW and V-belt transmission, V-Belt drive system complete with sheet steel guard and inspection door. The system allows the compressor speed to be adapted to give precisely the required Free Air Delivery. Standard range design for optimum efficiency. intercoolers between each stage and after-cooler. Three stage “L” cylinder compressor with : 3 micron air inlet...

Protection for hot temperatures Oil cooler – radiator for inside temperatures exceeding 40°C. This option comes along with the air-conditioning in the electrical control cabinet, the water cooled condenser for the HP Dryer. Specific selection of electric motor ; IP55 motor for hot and dusty environment, tropicalizing (see electrical options) Protection for cold temperatures Oil warming for inside temperatures between 1 and 5°C. Specific selections of cooling systems with protections items depending on site conditions (see separate cooling system options) Miscellaneous Condensate drain collector. Made from stainless steel, equipped with silencers and flexible rubber connections for collecting the condensates from the individual drains – Bekomat drain system used on the compressor, dryer – option- and receiver to simply be connected to the sewer ( flexible rubber hoses supplied suiting to a standard installation lay out – see the standard installation lay out drawing). Low sound...

Evaporative closed loop cooling towers : For temperatures above 32°C. Cooling capacities are selected to suit the local site wet bulb temperature, up to 30°C ( Wet Bulb ) to provide the most efficient cooling system. The tower and the water pump are controlled by the compressor’s electrical cabinet. Option : two speeds fan motor for winter and summer, antifreeze protections, tracing. Radiator cooling systems. Selected for maximum ambient temperatures up to 32°C, other selections accepting temporary heat peaks up to 36°C and 40°C during some hours per day. These specific versions are equipped with an automatic spray system with thermostatic control The radiator fans and the water pump are controlled by the compressor’s electrical cabinet. The water pump. is mounted on the compressor’s base plate. The cooling system, its functions (automatic spray system for radiators and antifreeze protections for cooling towers) and the water circulating pump are thermostatically monitored by...

AF COMPRESSORS est le leader mondial des compresseurs oil free PET Découvrez toute notre gamme de compresseurs à piston sans graissage.

Kolbenkompressoren