Produktai skirti kompiuterinė atmintis (148)

Conseil de développement TWN4 MultiTech Nano avec des interfaces comme UART, USB, GPIO et SAM. The TWN4 MultiTech Nano is a device for reading and writing RFID transponders. It can communicate with a large number of transponder types in the frequency ranges of 125kHz, 134.2kHz and 13.56MHz. This development board allows evaluation of many important interfaces of the TWN4 MultiTech Nano, like UART, USB, GPIO and SAM. Package Contents: Development board TWN4 MultiTech Nano C1 orTWN4 MultiTechNano LEGIC 42 C1 Micro USB cable Lever for TWN4 MultiTechNano/Nano LEGIC 42 2 x sample tags 125kHz 2 x sample tags 13.56MHz

The AX88783 is a 2port Ethernet switch featuring a third port, 8/16/32bit NonPCI/SRAMlike host interface. The builtin switching fabric supports nonblocking wirespeed forwarding and offers an advanced switch feature set that includes tag/portbased VLAN, spanning tree, QoS priority management, rate control, port security, port mirroring, IGMP snooping, and MIB counters. ASIX's new ICs are targeted at performancesensitive embedded applications that need to support two Ethernet ports, typically one for a LAN port and one for a WAN port. Also, the AX88783 support HP AutoMDIX, which allows both the straightthrough and crossover cables to be directly connected to the device without end user's guesswork.

Cliquer sur l'image afin de mieux voir

A7670E

Émetteurrécepteur RS232 de faible puissance 5V 250Kbps (Caractéristiques 28 broches, avec réveil, oscillation de tension de sortie ±9V)The ZT230E series devices are +5V powered EIA/TIA232 and V.28/V.24 communication interfaces with low power requirements. These transceivers consist of combinations up to five line drivers, five line receivers and the proprietary switchcapacitor regulated voltage converters. The ZT211E and ZT213E/AE feature a low power shutdown mode which draws as little current as 1µA typical with receiver outputs tristated and in wakeup. These devices operate from a single +5V power supply at the guaranteed data rate of 250K bits/sec with enhanced electrostatic discharge (ESD) protection in all RS232 I/O pins exceeding ±15kV HBM Meets EIA/TIA232F and CCITT V.28/V.24

Équipement d’approvisionnement en énergie pour l’alimentation sur HDBaseT (PoH)

Contrôleur ethernet rapide 8/16 bits non PCI 8/16 bits 10/100M Contrôleur ethernet rapide 8/16 bits non PCI 8/16 bits 10/100M The AX88782 is a singlechip 2port 10/100M Ethernet Switch controllers featuring a 3port switching fabric with QoS priority management, three 10/100M MACs, two 10/100M PHYs, and 8/16bit NonPCI host interface. The AX88782 supports checksum offload engine and burstmode access making it easy to provide a high performance 2port Ethernet connectivity solution for any embedded MCU. The builtin switching fabric in the AX88782 supports nonblocking wirespeed forwarding and offers an advanced switch feature set that includes tag/portbased VLAN, spanning tree, rate control, port security, port mirroring, IGMP snooping, MIB counters and four priority queues for QoS functions including PortBased, 802.1p VLAN, IPv4 TOS and IPv6 COS to prioritize voice

The EP103B LVDS transmitter supports transmission between the host and the flat panel display up to SXGA+ resolutions. The transmitter converts 25 bits (8bits/color, 2 dummy bits) of Low Voltage TTL data and 3 control bits into 4 LVDS (Low Voltage Differential Signal) data streams. At a maximum input clock rate of 135MHz, each LVDS differential data pair speed is 945Mbps, providing a total throughput of 3.78Gbps. The transmitter can be configured to input clock rising edge or falling edge strobe through an external pin. The EP103B includes the following distinctive features Support 10MHz to 135MHz clock rates for HVGA to SXGA+ resolution Up to 3.78Gbps bandwidth PLL requires no external components Cycletocycle jitter rejection 3.3V to 1.8V Low Voltage TTL tolerant Input Programmable data and control strobe selectV Power down mode supported BGA package (4.5mm x 7mm)

Multi-Band LTE-Cat3 HSPA+/GSM/GPRS/EDGE GNSS Dimension:30*30*2.9 mm SIMCom présente un module sans fil ultra compact et fiable SIM7100E qui est basé sur qualcomm MDM9215 multimode LTE plate-forme. SIM7100E est un module complet de type TDD-LTE/FDD-LTE/WCDMA/GSM/GNSS SMT conçu avec des processeurs très puissants intégrant le noyau de l’application : Cortex™ A5(550MHz), trois cœurs QDSP6 (jusqu’à 500Mhz), permettant au client de bénéficier de petites dimensions et de solutions de produits rentables. Il dispose d’une forte capacité d’extension avec des interfaces riches, y compris UART, USB2.0, SPI, I2C, Keypad, PCM, etc. Avec des fonctionnalités d’application abondantes comme TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 et MMS, le module offre beaucoup de flexibilité et de facilité d’intégration pour les applications du client. Supply voltage range:3.4V~ 4.2V Operation temperature: -40℃ to +85℃ Dimension:30 X 30X 2.9 mm Weight:5.8g GNSS:gpsOne Gen 8B;standalone;assisted,XTRA;

The Quectel RG500Q is a series of 5G Sub-6GHz module optimized specially for IoT and eMBB applications. Adopting the 3GPP Rel. 15 technology, it supports both 5G NSA and SA modes. The integrated GNSS receiver greatly simplifies product design and provides quicker, more accurate and more dependable positioning capability. RG500Q-EA 5G NR:n41/n77/n78/n79 LTE-FDD:B1/B3/B5/B7/B8/B20/B28 LTE-TDD:B34/B38/B39/B40/B41 DL 4×4 MIMO 5G NR:n41/n77/n78/n79 LTE-FDD:B1/B3/B7 LTE-TDD:B38/B41 USB 2.0/3.1:Support Master and Slave Modes PCM:Digital Audio (U)SIM:1.8V/3.0V RESET_N:Reset the Module Main × 3, Diversity × 5 and GNSS Antenna Interfaces DTMF:Dual-tone Multi-frequency* DFOTA:Delta Firmware Upgrade Over-the-Air Ethernet*/Wi-Fi* Function through PCIe Interface GNSS:GPS/GLONASS/BeiDou/Galileo/QZSS Output Power:Class 2 for n41/n77/n78/n79 Output Power:Class 3 for LTE-FDD Output Power:Class 3 for LTE-TDD Consumption:TBD @Power off Consumption:TBD @Sleep Consumption:TBD @Idle MBIM Driver:Windows 10 USB Serial Driver:Windows 7/8/8.1/10, Linux 2.6/3.x/4.1~4.14, Android 4.x/5.x/6.x/7.x RIL Driver:Android 4.x/5.x/6.x/7.x NDIS Driver:Windows 7/8/8.1/10 ECM Driver*:Linux 2.6/3.x/4.1~4.14 Gobinet Driver:Linux 2.6/3.x/4.1~4.14 QMI_WWAN Driver:Linux 3.x (3.4 or later)/4.1~4.14 Protocols:PPP/QMI/TCP*/UDP*/FTP*/HTTP*/NTP*/PING*/ HTTPS*/SMTP*/MMS*/FTPS*/SMTPS*/SSL Supply Voltage:3.3V~4.3V, 3.8V Typ. Temperature Range:-40°C ~ +85°C

The SIM8200G is Multi-Band 5G NR/LTE-FDD/LTETDD/HSPA+ module which supports R15 5G NSA/SA up to 4Gbps data transfer. It has strong extension capability with abundant interfaces including PCIe, USB3.1, GPIO etc. The module provides much flexibility and ease of integration for customer's applications. SIM8200G adopts LGA form factor and the AT commands are compatible with SIM8300 series modules. This also minimizes the investments of customers and enables a short time-to-market. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for many applications. GNSS:GPS/GLONASS/BeiDou/Galileo/QZSS Supply Voltage:3.3V ~ 4.4V Operation temperature: -30℃ ~ +70℃ Dimensions :41.0*43.6.0*2.8mm Weight:11.17g Sub-6G:Uplink up to 1Gbps Downlink up to 4Gbps LTE Cat 20+:Uplink up to 200Mbps Downlink up to 2Gbps HSPA+:Downlink up to 42Mbps

Module combo LoRa & BLE 5.0 Supporte aussi les protocoles IEEE802.15.4g et Wireless M-Bus Ultra low power Taille de 15*23*2.5mm Le module LoRa RAK4600 embarque un micro-controlleur Nordic nRF52832 associé avec le composant SX1276 de Semtech. Compatible avec LoRaWan 1.0.2 et supporte le LoRa point à point LoRaWan 1.0.2 BLE 5.0 Output power up to 20dB (max) et 4dBm en BLE Taille de 15*23*2.5mm I/O ports: UART/I2C/GPIO Consommation en veille de 2µA Connecteurs antennes intégrés I/O ports:UART/I2C/GPIO

RX-8571LC Interface Type:I²C-Bus Interface (400 kHz) Operating voltage range:1.6 V to 5.5 V Wide voltage for timekeeping:1.3 V to 5.5 V Low backup current:220 nA / 3V (Typ.)

LTE CATM1/NB-IoT/GNSS Couverture mondiale 3GPP rel 14 Taille Ultra Compact 14.8x12.8x2.0mm UART, GPIO, PCM, SPI, I2C Power Save Mode(PSM) and Extended Discontinuous Reception(eDRX), SIM7090G can extend battery life to 10 years. • CAT-M, NB-IoT double mode • Support Bands CAT-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26 /B27/B28/B66/B85 • Support Bands NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28 /B66/B71/B85 • Dimensions: 14.8 X 12.8 X 2.0 mm* • Interfaces: UART, SIM card, PCM/I2S/SPI, I2C, GPIO, ADC, USB • Cat-M: Uplink: 1119Kbps Downlink: 589Kbps • NB-IoT: Uplink: 150Kbps Downlink: 136Kbps Dimensions:14.8 X 12.8 X 2.0 mm* Interfaces:UART, SIM card, PCM/I2S/SPI, I2C, GPIO, ADC, USB

SC20 fournit des débits de liaison descendants au maximum de 150 Mbps et des débits de liaison vers le haut de 50 Mbps basés sur le réseau LTE, et prend en outre en charge la communication sans fil via IEEE 802.11 a/b/g/n (IEEE 802.11 b/g/n pour SC20-CE/SC20-W par défaut) et BT4.1 LE (BT4.2 sur Android 7.1 ou versions ultérieures). Il est idéal pour les applications industrielles et grand public nécessitant un taux de données élevé et un accès internet haute vitesse. SC20 est compatible à l’arrière avec les réseaux EDGE et GSM/GPRS existants, ce qui garantit qu’il peut être connecté même dans des zones éloignées dépourvues de couverture 3G ou LTE. SC20 prend en charge la technologie MIMO (multiple-input multiple-output). L’utilisation de plusieurs antennes à l’extrémité du récepteur en même temps et sur la même bande de fréquence minimise considérablement les erreurs et optimise la vitesse de données. Prend en charge:Android OS, Wi-Fi, Bluetooth et GNSS dans un seul module

Quad channel serial digital video receiver for HD video surveillance and HDcctv applications Dual rate operation 270Mbps and 1.485Gbps Backwards compatible with HDcctv 1.0 and HDSDI Four independent receiver channels with high performance cable equalization, with support for 50/75Ω coaxial and twisted pair cable transmission Integrated High Definition Visually Lossless CODEC (HDVLC™) for extended cable reach 500m over 755 (5C) CCTV coax 300m over 753 (3C) CCTV coax 150m over Cat5e/6 UTP cable Serial digital loopthough output per channel Integrated audio deembedder for the extraction of up to 4 channels of I2S serial digital audio at 32kHz, 44.1kHz and 48kHz sample rates, per video channel Supports both 720p and 1080p HD formats 1080p 25/29.97/30fps 720p 25/29.97/30/50/59.94/60fps Four 8/10bit BT.1120 compliant output video interfaces, with embedded TRS and external HVF timing outputs

SC20 est un module intelligent 4G Quectel, industriel haute performance, système d’exploitation Android, communication sans fil à courte portée, prise en charge GPS / GLONASS Mémoire de masse:8GB EMMC+1Gb LPDDR3 Alimentation:12V DC

Multi-Band LTE-Cat1 HSPA+/GSM/GPRS/EDGE GNSS Dimension : 30*30*2.9 mmSIM7600E : multi-band LTE-TDD/LTE-FDD/HSPA+ et gsm/GPRS/EDGE dans un type SMT qui prend en charge LTE CAT1 jusqu’à 10 Mbps pour le transfert de données downlink. Il a une forte capacité d’extension avec des interfaces riches, y compris UART, USB2.0, I2C, GPIO etc. Doté d’une capacité d’application abondante comme TCP/UDP/FTP/FTPS/HTTP/HTTPS/DNS, le module offre beaucoup de flexibilité et de facilité d’intégration pour l’application client Supply voltage range:3.4V~ 4.2V Operation temperature: -40℃ to +85℃ Dimension:30*30*2.9 mm Weight:5.5g

Ultrium RW Data Cartridge, LTO Ultrium 5, 1.5 TB / 3 TB, compatible with HPE MSL2024, MSL4048, MSL8096, MSL6480 Marchio:HP Colore:blu OEM:C7975A EAN :0884962925348

The AX99100 is a single chip solution that fully integrates PCIe 2.0 Gen 1 endpoint controller and SerDes with a variety of peripherals such as four High Speed Serial Ports, one Parallel Port, I²C Master, High Speed SPI, Local Bus (ISALike) , and GPIOs. It consists of four main configurations such as 4S (PCIe to Quad Serial), 2S+1P (PCIe to Dual Serial and Single Parallel), 2S+SPI (PCIe to Dual Serial and SPI), and LB (PCIe to Local Bus/ISALike) for different kinds of applications. The AX99100, in 68pin QFN, are available with RoHS compliant package and supports commercial grade operating temperature range from 0 to 70°C and industrial grade from 40 to 85°C. PCI Express Singlelane (X1) PCI Express Endpoint Controller with PHY integrated Compliant with PCI Express 2.0 Gen

SBC 3"5 4ème Génération Intel® Core™ Processor:4th Gen Intel® Core™ Memory:1 DDR3L SODIMM up to 8GB Expansion:2 Mini PCIe 1 SIM Display:2 DP 1 LVDS Storage:2 SATA 3.0 RAID 0/1 Features:2 LAN 3 COM 4 USB 3.0 2 USB 2.0 8-bit DIO 12V DC-in(HU551) 15~36V DC-in(HU553) DRAM device technologies:1Gb, 2Gb and 4Gb DDR3L DRAM technologies are supported for x8 and x16 devices, unbuffered, non-ECC Display ports:1 LVDS, 2 DP (default) or 2 HDMI* LVDS:NXP PTN3460, 48-bit, dual channel, resolution up to 1920x1200 @ 60Hz DP:resolution up to 3200 x 2000 @ 60Hz HDMI:resolution up to 4096x2304 @ 24Hz or 2560x1600 @ 60Hz HU553-N-4650U:19.68W with i7-4650U at 1.7GHz and 2x 4GB DDR3L SODIMM HU551 :309,931 hrs @ 25°C; 152,236 hrs @ 45°C; HU553 :305,338 hrs @ 25°C; 149,213 hrs @ 45°C Calculation model:Telcordia Issue 2, Method I Case 3 Environment:GB, GC – Ground Benign, Controlled DIMENSIONS:3.5" board

Carte concentrateur LoRa Gateway au format MiniPCIe Basé sur le SX1301 de Semtech Jusqu'à 10 voies de démodulation programmables en parallèle Compatible avec la spécifications Mini PCIe avec radiateur LoRaWan 1.0.2 Couvre les bandes EU433, CN470, EU868, US915, AS923, AU915, KR920, IN865 et AS920 Basé sur le processeur de bande de base SX1301 avec émulation de 49 LoRa démodulateur, 10 voies de démodulation en parralèlle. Supporte multi-channel (8 voies montantes / 1 descendante) 2 x SX125x Tx/Rx Tension de 3.3V compatible avec les cartes LTE MiniPCIe Puissance transmission Tx de 25dBm et sensibilité en réception de -139dBm @ SF12,BW 125KHz Interface SPI ou USB

Antenne 125kHz+13.56MHz pour module de base MultiTech TWN4As addition to our RFID modules we also offer compatible RFID antennas and RFID antenna kits. It is very easy to integrate or to test the performance of the TWN4 reader/writer modules with a suitable external antenna using various connectors (i.e. SMA, SMB, SMC, MCX (connector HF1) and UMCC/U.FL (connectors HF2). dimensions L x W x H : 33 x 30 x6 mm Connect of TWN4 MultiTech Core Module with appropriate UMCC antenna cable, 100mm, female to female for 13,56MHz, right angle dimensions L x W x H:33 x 30 x6 mm

The GS3441 is a highspeed BiCMOS integrated circuit designed to equalize and restore signals received over 75ohm coaxial cable. The device is designed to support SMPTE ST 424, SMPTE ST 292 and SMPTE ST 259, and is optimized for performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s. The GS3441 features DC restoration to compensate for the DC content of SMPTE pathological test patterns. The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected. It can be connected directly to the SLEEP pin to enable automatic powerdown upon loss of carrier. A voltage programmable threshold, which can be changed via the SQ_ADJ pin, forces CD high when the input signal amplitude falls below the threshold. This allows the GS3441 to distinguish between lowamplitude SDI signals and noise at the input of the device. The equalizing and DC restore stages are disengaged when the BYPASS pin is HIGH. No equalization occurs in Bypass mode.

The GS2971A is a multirate SDI integrated Receiver which includes complete SMPTE processing, as per SMPTE 425M, 292M and SMPTE 259MC. The SMPTE processing features can be bypassed to support signals with other coding schemes. The GS2971A integrates Gennum's adaptive cable equalizer technology, achieving unprecedented cable lengths and jitter tolerance. It features DC restoration to compensate for the DC content of SMPTE pathological signals. The device features an Integrated Reclocker with an internal VCO and a wide Input Jitter Tolerance (IJT) of 0.7UI. A serial digital loopthrough output is provided, which can be configured to output either reclocked or nonreclocked serial digital data. The serial digital output can be connected to an external cable driver. The device operates in one of four basic modes SMPTE mode, DVBASI mode, DataThrough mode or Standby mode.

Kit EVB intelligent pour tester les fonctionnalités de base sur smart module fr série SCxx Applicable Module LTE CAT-4 SC20 Key Features ● Two USIM interfaces ● Two UART interfaces ● Multiple audio interface ● USB interface ● Keypads and LED indication lightsEVB Kit Includes ● USB to UART converter cable X 1 ● USB cable X 1 ● RF cable X 4 ● Main antenna X 2 ● WiFi antenna X 1 ● GNSS antenna (passive) X 1 ● Earphone X 1 ● USB2.0 to RS232 driver and USB driver disk X 1 ● Li-polymer battery X 1 ● Bolts and nuts for fixing EVB X 1

Double mode « LoRa-Sigfox » ou « LoRa uniquement » module SMD The MM002-xx-EU is a family of long-range and low power wireless modules operating on ISM 868Mhz unlicensed band. With interferers’ robustness and low power consumption, it is the best solution for applications requiring long range, maximum battery lifetime and secure radio link. This module integrates a SX1272 LoRaTM transceiver from Semtech and a low power ARM Cortex M3 controller. Dimension:14,4mm x 26,4mm x 2,5mm Modulation :LoRa™ / SIGFOX™/ FSK

Ultra-compact LTE Cat M1/Cat NB2 moduleLTE Cat M1/Cat NB2 module with ultra-low power consumption Compact SMT form factor ideal for size-constrained applications with tight space Super slim profile in LGA package Integrated RAM and Flash in baseband chipset Comprehensive set of hardware-based security features Fast time-to-market: reference designs, evaluation tools and timely technical support minimize design-in time and development efforts Robust mounting and interfaces Fast time-to-market:reference designs, evaluation tools and timely technical support minimize design-in time

SG-310 Series Frenquency range:2 MHz to 80 MHz Supply voltage:1.8 V Typ / 2.5 V Typ / 3.3 V typ Function:Standby External dimensions:3.2 x 2.5 1.05 mm Output:CMOS

Module sans fil ultra-compact et fiable SIM8950, basé sur la plate-forme LTE multi-mode Qualcomm MSM8953. Module intelligent conçu avec des processeurs très puissants. Supply voltage range:3.4 ~ 4.4 V Operation temperature: -25℃ to +75℃ Storage temperature:-40℃ to +90℃ Dimension:44.1*45.6*2.8mm Weight:12.5g