Produktai skirti kompiuterinė atmintis (126)

SC20 est un module intelligent 4G Quectel, industriel haute performance, système d’exploitation Android, communication sans fil à courte portée, prise en charge GPS / GLONASS Mémoire de masse:8GB EMMC+1Gb LPDDR3 Alimentation:12V DC

Multi-Band LTE-Cat1 HSPA+/GSM/GPRS/EDGE GNSS Dimension : 30*30*2.9 mmSIM7600E : multi-band LTE-TDD/LTE-FDD/HSPA+ et gsm/GPRS/EDGE dans un type SMT qui prend en charge LTE CAT1 jusqu’à 10 Mbps pour le transfert de données downlink. Il a une forte capacité d’extension avec des interfaces riches, y compris UART, USB2.0, I2C, GPIO etc. Doté d’une capacité d’application abondante comme TCP/UDP/FTP/FTPS/HTTP/HTTPS/DNS, le module offre beaucoup de flexibilité et de facilité d’intégration pour l’application client Supply voltage range:3.4V~ 4.2V Operation temperature: -40℃ to +85℃ Dimension:30*30*2.9 mm Weight:5.5g

The AX99100 is a single chip solution that fully integrates PCIe 2.0 Gen 1 endpoint controller and SerDes with a variety of peripherals such as four High Speed Serial Ports, one Parallel Port, I²C Master, High Speed SPI, Local Bus (ISALike) , and GPIOs. It consists of four main configurations such as 4S (PCIe to Quad Serial), 2S+1P (PCIe to Dual Serial and Single Parallel), 2S+SPI (PCIe to Dual Serial and SPI), and LB (PCIe to Local Bus/ISALike) for different kinds of applications. The AX99100, in 68pin QFN, are available with RoHS compliant package and supports commercial grade operating temperature range from 0 to 70°C and industrial grade from 40 to 85°C. PCI Express Singlelane (X1) PCI Express Endpoint Controller with PHY integrated Compliant with PCI Express 2.0 Gen

SBC 3"5 4ème Génération Intel® Core™ Processor:4th Gen Intel® Core™ Memory:1 DDR3L SODIMM up to 8GB Expansion:2 Mini PCIe 1 SIM Display:2 DP 1 LVDS Storage:2 SATA 3.0 RAID 0/1 Features:2 LAN 3 COM 4 USB 3.0 2 USB 2.0 8-bit DIO 12V DC-in(HU551) 15~36V DC-in(HU553) DRAM device technologies:1Gb, 2Gb and 4Gb DDR3L DRAM technologies are supported for x8 and x16 devices, unbuffered, non-ECC Display ports:1 LVDS, 2 DP (default) or 2 HDMI* LVDS:NXP PTN3460, 48-bit, dual channel, resolution up to 1920x1200 @ 60Hz DP:resolution up to 3200 x 2000 @ 60Hz HDMI:resolution up to 4096x2304 @ 24Hz or 2560x1600 @ 60Hz HU553-N-4650U:19.68W with i7-4650U at 1.7GHz and 2x 4GB DDR3L SODIMM HU551 :309,931 hrs @ 25°C; 152,236 hrs @ 45°C; HU553 :305,338 hrs @ 25°C; 149,213 hrs @ 45°C Calculation model:Telcordia Issue 2, Method I Case 3 Environment:GB, GC – Ground Benign, Controlled DIMENSIONS:3.5" board

Carte concentrateur LoRa Gateway au format MiniPCIe Basé sur le SX1301 de Semtech Jusqu'à 10 voies de démodulation programmables en parallèle Compatible avec la spécifications Mini PCIe avec radiateur LoRaWan 1.0.2 Couvre les bandes EU433, CN470, EU868, US915, AS923, AU915, KR920, IN865 et AS920 Basé sur le processeur de bande de base SX1301 avec émulation de 49 LoRa démodulateur, 10 voies de démodulation en parralèlle. Supporte multi-channel (8 voies montantes / 1 descendante) 2 x SX125x Tx/Rx Tension de 3.3V compatible avec les cartes LTE MiniPCIe Puissance transmission Tx de 25dBm et sensibilité en réception de -139dBm @ SF12,BW 125KHz Interface SPI ou USB

Antenne 125kHz+13.56MHz pour module de base MultiTech TWN4As addition to our RFID modules we also offer compatible RFID antennas and RFID antenna kits. It is very easy to integrate or to test the performance of the TWN4 reader/writer modules with a suitable external antenna using various connectors (i.e. SMA, SMB, SMC, MCX (connector HF1) and UMCC/U.FL (connectors HF2). dimensions L x W x H : 33 x 30 x6 mm Connect of TWN4 MultiTech Core Module with appropriate UMCC antenna cable, 100mm, female to female for 13,56MHz, right angle dimensions L x W x H:33 x 30 x6 mm

The GS3441 is a highspeed BiCMOS integrated circuit designed to equalize and restore signals received over 75ohm coaxial cable. The device is designed to support SMPTE ST 424, SMPTE ST 292 and SMPTE ST 259, and is optimized for performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s. The GS3441 features DC restoration to compensate for the DC content of SMPTE pathological test patterns. The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected. It can be connected directly to the SLEEP pin to enable automatic powerdown upon loss of carrier. A voltage programmable threshold, which can be changed via the SQ_ADJ pin, forces CD high when the input signal amplitude falls below the threshold. This allows the GS3441 to distinguish between lowamplitude SDI signals and noise at the input of the device. The equalizing and DC restore stages are disengaged when the BYPASS pin is HIGH. No equalization occurs in Bypass mode.

The GS2971A is a multirate SDI integrated Receiver which includes complete SMPTE processing, as per SMPTE 425M, 292M and SMPTE 259MC. The SMPTE processing features can be bypassed to support signals with other coding schemes. The GS2971A integrates Gennum's adaptive cable equalizer technology, achieving unprecedented cable lengths and jitter tolerance. It features DC restoration to compensate for the DC content of SMPTE pathological signals. The device features an Integrated Reclocker with an internal VCO and a wide Input Jitter Tolerance (IJT) of 0.7UI. A serial digital loopthrough output is provided, which can be configured to output either reclocked or nonreclocked serial digital data. The serial digital output can be connected to an external cable driver. The device operates in one of four basic modes SMPTE mode, DVBASI mode, DataThrough mode or Standby mode.

Kit EVB intelligent pour tester les fonctionnalités de base sur smart module fr série SCxx Applicable Module LTE CAT-4 SC20 Key Features ● Two USIM interfaces ● Two UART interfaces ● Multiple audio interface ● USB interface ● Keypads and LED indication lightsEVB Kit Includes ● USB to UART converter cable X 1 ● USB cable X 1 ● RF cable X 4 ● Main antenna X 2 ● WiFi antenna X 1 ● GNSS antenna (passive) X 1 ● Earphone X 1 ● USB2.0 to RS232 driver and USB driver disk X 1 ● Li-polymer battery X 1 ● Bolts and nuts for fixing EVB X 1

Double mode « LoRa-Sigfox » ou « LoRa uniquement » module SMD The MM002-xx-EU is a family of long-range and low power wireless modules operating on ISM 868Mhz unlicensed band. With interferers’ robustness and low power consumption, it is the best solution for applications requiring long range, maximum battery lifetime and secure radio link. This module integrates a SX1272 LoRaTM transceiver from Semtech and a low power ARM Cortex M3 controller. Dimension:14,4mm x 26,4mm x 2,5mm Modulation :LoRa™ / SIGFOX™/ FSK

Ultra-compact LTE Cat M1/Cat NB2 moduleLTE Cat M1/Cat NB2 module with ultra-low power consumption Compact SMT form factor ideal for size-constrained applications with tight space Super slim profile in LGA package Integrated RAM and Flash in baseband chipset Comprehensive set of hardware-based security features Fast time-to-market: reference designs, evaluation tools and timely technical support minimize design-in time and development efforts Robust mounting and interfaces Fast time-to-market:reference designs, evaluation tools and timely technical support minimize design-in time

SG-310 Series Frenquency range:2 MHz to 80 MHz Supply voltage:1.8 V Typ / 2.5 V Typ / 3.3 V typ Function:Standby External dimensions:3.2 x 2.5 1.05 mm Output:CMOS

Module sans fil ultra-compact et fiable SIM8950, basé sur la plate-forme LTE multi-mode Qualcomm MSM8953. Module intelligent conçu avec des processeurs très puissants. Supply voltage range:3.4 ~ 4.4 V Operation temperature: -25℃ to +75℃ Storage temperature:-40℃ to +90℃ Dimension:44.1*45.6*2.8mm Weight:12.5g

Module NB-IOT Dimensions: 24 X 24 X 2.6mmLe module SIM7000E-N est un quad-band LTE-FDD NB-IoT dans un type SMT qui prend en charge LTE CAT NB-IoT jusqu’à 66 kbps transfert de données. Il dispose d’une forte capacité d’extension avec des interfaces riches, y compris UART, USB2.0, GPIO etc. Le module offre beaucoup de flexibilité et de facilité d’intégration pour l’application du client. Le package de SIM7000E-N est compatible avec SIM900 et SIM800F. Les commandes AT de SIM7000E-N sont pour la plupart compatibles avec SIM800F. Cela réduit également les investissements des clients, et permet un court laps de temps à la commercialisation. Il est conçu pour les applications qui ont besoin d’une faible latence, communication de données de débit moyen dans une variété de conditions de propagation radio. Supply voltage range:3.0V~ 4.3V, Typ: 3.8V Operation temperature:-40℃ to +85℃ Dimensions:24 X 24 X 2.6mm Weight:3.0g Power off:7uA PSM:9uA Note:* In Planning

The GS12281 is a lowpower, multirate, retiming cable driver supporting rates up to 12G UHDSDI. It is designed to receive 100Ohm differential input signals, automatically recover the embedded clock from the digital video signal and retime the incoming data, and transmit the retimed signal over 75Ohm coaxial cables. The 100Ohm trace input supports up to 17dB of insertion loss.The device supports SMPTE ST 20821 (12G UHDSDI), ST 20811 (6G UHDSDI), ST 424 (3G SDI), ST 2921 (HDSDI) and ST 259 (SDSDI). In addition to standard SMPTE rates, the device also supports retiming of DVBASI at 270Mb/s, MADI at 125Mb/s, and 10GbE. The two cable drivers have highly configurable preemphasis and swing controls to compensate for long trace and connector losses. Additionally, automatic and user selectable output slew rate control is provided for each cable driver output.

Quectel EM06 est une série de modules LTE Advanced CAT.6 optimisés spécialement pour les applications M2M et IoT Quectel EM06 is a series of LTE Advanced category 6 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 12 LTE technology, it delivers M2M-optimized speeds of 300Mbit/s downlink and 50Mbit/s uplink peak data rates. Designed in the M.2 form factor, EM06 is compatible with Quectel future Cat.9 module EM09, Cat.12 module EM12 and Cat.16 module EM16 , which will facilitate customers to migrate between different categories in the future. EM06 contains 4 variants (EM06-E, EM06-A, EM06-LA and EM06-APAC) which are designed for different target regions and nearly cover all the main stream carriers worldwide. EM06 supports Qualcomm® IZat™ location technology Gen8C Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning capability. Feature refinements:supports DFOTA*, eCall* and DTMF

Kit de démarrage pour le système M-501 sur le module Ethernet:1 x 10/100Mbps TTY:1 x RS-232 / 422 / 485 and 3 x RS-232 USB Host: 2 x USB 2.0 compliant GPIO: 32 pins, CMOS / TTL-level SD socket:1 Status LEDs:for power, Ethernet and TTY ports

TWN4 MultiTech 3 BLE est un nouveau lecteur compact, 50 x 35 mm seulement, HF + LF & BLE, avec antenne TWN4 MultiTech 3 BLE is new compact reader, 50 x 35 mm only, HF + LF & BLE, with antenna 50 x 35 mm only 125/134.2KHz, 13.56MHz Integrated LF & HF antenna OEM versiononly Micro USB Connector (optionally)

SC600T est la nouvelle génération de module Smart LTE Cat 6 multi-mode de Quectel avec Android 9.0 OS intégré. Basé sur qualcomm octa-core et processeurs haute performance 64 bits avec adrenoTM 506 GPU intégré, SC600T est conçu pour prendre en charge les performances de pointe, diverses fonctionnalités multimédias et quick charge 3.0 technologie. Il est idéal pour les applications industrielles et grand public avec des fonctions à haut débit de données et multimédia. SC600T est disponible en quatre variantes. SC600T prend en charge la technologie MIMO. L’utilisation de plusieurs antennes à l’extrémité du récepteur en même temps et sur la même bande de fréquence minimise considérablement les erreurs et optimise la vitesse de données. Principaux avantages ● Modem LTE Cat 6 prenant en charge l’agrégation du transporteur 2 x 20 MHz, avec une vitesse de téléchargement maximale pouvant atteindre 300 Mbps ● Couverture mondiale LTE, UMTS/HSPA+ et GSM/GPRS/EDGE

The EP103 LVDS transmitter supports transmission between the host and the flat panel display up to SXGA+ resolutions. The transmitter converts 3×10 bits of Low Voltage TTL data and 3 control bits into 4 LVDS (Low Voltage Differential Signal) data streams. At a maximum input clock rate of 135MHz, each LVDS differential data pair speed is 945Mbps, providing a total throughput of 3.78Gbps. The transmitter can be configured to input clock rising edge or falling edge strobe through an external pin. Support 10MHz to 135MHz clock rates for HVGA to SXGA+ resolution Up to 3.78Gbps bandwidth PLL requires no external components Cycletocycle jitter rejection 3.3V to 1.8V Low Voltage TTL tolerant Input Programmable data and control strobe select Power down mode supported LQFP64 package

Cliquer sur l'image afin de mieux voir

Module GPS/GNSS avec antenne à puce intégrée SIMCom presents a high performance GPS module accompany with GNSS antenna - SIM33ELA. This is a standalone GNSS module embedded a linear antenna . Designed with MTK’s high sensitivity navigation engine, it allows you to achieves the industry’s highest levels of sensitivity, accuracy, and Time-to-First-Fix (TTFF) with lowest power consumption. And with embedded antenna in SMT type, it is very easy to embed into customer’s application Mechanical data Dimensions:14*9.6*2.15 mm Mechanical data Weight:0.5g Electrical data Acquisition:25mA Electrical data Tracking:20mA Electrical data Backup:14μA Tracking: -165 dBm Reacquisition:-160 dBm Cold starts:-147 dBm Automatic Position3:2.5m CEP Speed4:0.1m/s Operation temperature:-40℃~+85 ℃

Multi-Band LTE Cat1/GSM + GNSS Dimension: 24*27*2.75mmThe SIM7500E is Multi-Band LTE-FDD/GSM module solution in a LGA type which supports LTE CAT1 up to 10Mbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, I2C, GPIO etc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application. Supply voltage range:3.4V~ 4.2V Operation temperature:-40℃ to +85℃ Dimension:24*27*2.75mm Weight:4.0g

Microcontrôleur à puce unique avec TCP/IP et 10/100M Fast Ethernet MAC/PHY (Caractéristiques 512K Flash, EMI, Local Bus, MII, 32GPIOs, LQFP128)The AX11015, Single Chip Microcontroller with TCP/IP and 10/100M Fast Ethernet MAC/PHY, is a SystemonChip (SoC) solution which offers a high performance embedded micro controller and rich communication peripherals for wide varieties of application which need access to the LAN or Internet. With builtin network protocol stack, the AX11015 provides very cost effective networking solution to enable simple, easy and low cost Internet connection capability for many applications such as consumer electronics, networked home appliances, industrial equipments, security systems, remote data collection equipments, remote control, remote monitoring and remote management. In addition to standalone application, the AX11015

UMTS & LTE EVB pour les concepteurs de développer des applications basées sur les modules Quectel UMTS & LTE et les modules Wi-Fi Applicable Modules ● UC20 ● UG35 - UG95 - UG96 ● EC25 - EC21 - EC20 - EC20 R2 ● FC20 - FC20N ● EG95 EVB Kit Includes ● USB to UART converter cable X 1 ● USB cable X 1 ● RF cables X 4 ● Main Antennas X 2 ● GNSS Antenna (passive) X 1 ● Wi-Fi Antenna X 1 ● Earphone X 1 ● USB 2.0 to RS232 driver and USB driver disk X 1 ● ALC5616 and TLV320AIC3104 codec boards X 2 ● Bolts and nuts for fixing EVB X 1 ● One page of instruction

Cliquer sur l'image afin de mieux voir

Microcontrôleur à puce unique avec TCP/IP et 10/100M Fast Ethernet MAC/PHY (Caractéristiques 128K Flash, 16GPIOs, LQFP80) The AX11001, Single Chip Microcontroller with TCP/IP and 10/100M Fast Ethernet MAC/PHY, is a SystemonChip (SoC) solution which offers a high performance embedded micro controller and rich communication peripherals for wide varieties of application which need access to the LAN or Internet. With builtin network protocol stack, the AX11001 provides very cost effective networking solution to enable simple, easy and low cost Internet connection capability for many applications such as consumer electronics, networked home appliances, industrial equipments, security systems

LTE CAT-M1(eMTC), module NB-IoT et GNSS The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike GSM900:2W DCS1800:1W Supply voltage range:3.0V~ 4.3V, Typ: 3.8V Operation temperature:-40℃ to +85℃ Dimensions:24 X 24 X 2.6mm Weight:3.0g Power off: 7uA PSM:9uA Sleep:1mA Idle:11mA

The EP103T LVDS transmitter supports transmission between the host and the flat panel display up to SXGA+ resolutions. The transmitter converts 25 bits (8bits/color, 2 dummy bits) of Low Voltage TTL data and 3 control bits into 4 LVDS (Low Voltage Differential Signal) data streams. At a maximum input clock rate of 135MHz, each LVDS differential data pair speed is 945Mbps, providing a total throughput of 3.78Gbps. The transmitter can be configured to input clock rising edge or falling edge strobe through an external pin. Support 10MHz to 135MHz clock rates for HVGA to SXGA+ resolution Up to 3.78Gbps bandwidth PLL requires no external components Cycletocycle jitter rejection 3.3V to 1.8V Low Voltage TTL tolerant Input Programmable data and control strobe select Power down mode supported

The AX88178 USB to 10/100/1000 Gigabit Ethernet/HomePNA/HomePlug controller is a high performance and highly integrated ASIC with embedded 40KB SRAM for packet buffering. It enables low cost and affordable Gigabit Ethernet network connection to desktop, notebook PC, and embedded system using popular USB ports. It has an USB interface to communicate with USB host controller and is compliant with USB specification V1.0, V1.1 and V2.0. It implements 10/100/1000Mbps Ethernet LAN function based on IEEE802.3, IEEE802.3u, IEEE802.3ab standards or HomePNA standard. It supports mediaindependent interface (MII) to simplify the design on implementing Fast Ethernet and HomePNA functions. It also provides gigabit mediaindependent (GMII) and reduced gigabit mediaindependent (RGMII) interface for interfacing with Gigabit Ethernet PHY. Single chip USB to 10/100/1000 Gigabit Ethernet and HomePNA and HomePlug Network Controller