Produktai skirti kiti (3)

Grūdų konteinerių krautuvas ZZ-120 - Greitai krauna grūdus, granules ir kitą biriąsias krovinius į bet kurį konteinerį ir vagoną

Grūdų konteinerių krautuvas ZZ-120 - Greitai krauna grūdus, granules ir kitą biriąsias krovinius į bet kurį konteinerį ir vagoną

Loader ZZ-120 loads any kind of grain, granules, pellets, etc. in any wagons and containers. Loader capacity up to 120 tons per hour. The flight range of the grain is up to 20 meters, the height is up to 9 meters and is regulated in 1 second. Grain loader ZZ-120 can rotate around 360 degrees. This allows you to load grain and other bulk cargo into wagons and containers of any length and height. The ZZ-120 grain loader consists of a trimmer with a support and an electric motor, a special trimmer pipe and a control panel. Electricity consumption for loading 1 ton of grain is only 0.046 kWh. A frequency converter can be additionally mounted in the control panel, which provides additional opportunities for regulating the range and height of the flight of grain. Unlike FulFiller container loading system, there is no need to hook the ZZ-120 grain loader directly onto the container itself using a forklift. Performance, tons per hour:up to 120 Mass, kg:297 Capacity, kWt:7,5
Aliuminio chlorohidrato tirpalas 40% CAS_12042-91-0

Aliuminio chlorohidrato tirpalas 40% CAS_12042-91-0

Aluminium chlorohydrate is a group of specific aluminium salts; it is widely used in deodorants, antiperspirants,and as a coagulant in water purification. In water purification, it is effective to destabilize and to remove suspended materials compared to other aluminium salts such as aluminium sulfate, aluminium chloride and various forms of polyaluminium chloride and polyaluminium chlorisulfate. Synonyms: Aluminum Hydroxychloride, Aluminum Chloride, Aluminum Chlorohydroxide. CAS No: 12042-91-0.
Liejimas - Liejinių gamyba LAP metodu iš aliuminio, cinko ir kitų žemai lydančių lydinių

Liejimas - Liejinių gamyba LAP metodu iš aliuminio, cinko ir kitų žemai lydančių lydinių

Production of castings by the LAP method from aluminum, zinc and other low-melting alloys on machines with a cold horizontal pressing chamber with locking force from 250 to 420 t / s, weighing from 0.050 kg to 6.0 kg. Production of castings by casting into metal reusable molds (chill molds) of aluminum alloys, on chill machines with manual and hydraulic drive, the mass of castings from 0.050 kg to 6.0 kg.