Produktai skirti gali (72)

Cortec VpCI-377 Rust Prevention Spray is a top-tier solution safeguarding metal surfaces from corrosion. Outshining competitors, VpCI-377 harnesses Cortec's advanced Vapor Corrosion Inhibitor (VpCI) technology.Unlike traditional oil-based or desiccant sprays, VpCI-377 utilises chemically active compounds vaporising to form an invisible protective layer on all metal surfaces. This ensures comprehensive protection, even in hard-to-reach areas, and accommodates diverse metals like steel, copper, aluminium, and brass.Easy application, removability, and an eco-friendly water-based formula without harsh chemicals set it apart.Beyond rust prevention, VpCI-377 cleans, degreases, and inhibits mold/mildew.

Cortec VPCI 337 is een toonaangevende sprayformule voor roestremmers. Onderdeel van het Ecofog®-assortiment van biologisch afbreekbare vloeistoffen VPCI-337 is een dampcorrosieremmer op waterbasis die voornamelijk wordt gebruikt om voldoende corrosiebescherming te creëren in interne lege ruimtes. Deze formule vervangt in wezen alle verouderde metaalconserveringssystemen zoals stikstof- en droge-luchtdekking. De Dampfase-corrosieremmers (VPCI) in 337 zijn ontworpen om lege ruimtes in containers, tanks, exportkratten en andere behuizingen te vernevelen (of vernevelen). De VPCI-moleculen migreren weg van hun oorspronkelijke sproeipatroon om metalen oppervlakken in de omsloten ruimte te beschermen. Deze methode is een arbeidsbesparende techniek waarbij minimaal product wordt gebruikt om mogelijk grote volumes en ruimtes te beschermen. De 'waardevergelijking' betekent hier dat het gebruik van Cortec VPCI 337-producten op lange termijn zowel kosten- als tijdbesparingen oplevert.

Cortec VPCI 337 es una fórmula en aerosol inhibidor de óxido líder en el mercado. Parte de la gama Ecofog® de fluidos biodegradables VPCI-337 es un inhibidor de corrosión por vapor a base de agua que se usa principalmente para crear suficiente protección contra la corrosión dentro de los espacios vacíos internos. Esta fórmula esencialmente reemplaza todos los sistemas heredados de preservación de metales, como el nitrógeno y el aire seco. El Inhibidores de corrosión en fase de vapor (VPCI) en 337 están diseñados para empañar (o empañar) espacios vacíos dentro de contenedores, tanques, cajas de exportación y otros recintos. Las moléculas de VPCI se alejan de su patrón de pulverización inicial para proteger las superficies metálicas dentro del espacio cerrado.

Cortec VPCI® 414 is een op water gebaseerde, biologisch afbreekbare schonere ontvetter die ook tijdelijke coatings zoals Cosmoline ™, Cortec VPCI 368, VPCI 388, VPCI 389 en niet-siliconen gebaseerde wassubstanties verwijdert van metalen en geverfde oppervlakken. Functies Tijdelijke coatingverwijderaar voor zwaar werk Effectief als lichte vetverwijderaar Effectief als lichte olieverwijderaar Niet vlambaar Effectief toepasbaar bij kamertemperatuur. Dit vermindert de behoefte aan 'energieverbruikende' verwarmingstoestellen. VPCI 414 kan worden gebruikt in een verwarmd bad voor het verwijderen van zware koolwaterstoffen en resterende coatings. Viskeuze vloeistof die goed hecht aan plafonds en verticale oppervlakken Gebruiksklare formulering Effectief bij gebruik in lage concentraties Blijft werken en biedt corrosiebescherming, zelfs nadat onderdelen zijn gereinigd Kan zowel metaal in oplossing als boven de vloeistoflijn beschermen op koolstofstaal.

Cortec VpCI® 422 Rust Remover - 5 Gallon Drums. Cortec VpCI® 422 is a versatile rust-fighting solution packaged in convenient 5-gallon drums.Designed to tackle rust head-on, it not only effectively removes it but also shields metal surfaces from future corrosion.Key benefits include its ability to transform rust into a removable black coating while simultaneously forming a protective barrier. This water-based formula is safe, non-toxic, and non-flammable, making it suitable for various metals.Easy application through brushing, rolling, or spraying ensures wide-ranging use across industries like automotive, oil and gas, and construction.By converting rust into a stable iron oxide and leveraging Vapor phase Corrosion Inhibitors (VpCIs), Cortec VpCI® 422 offers long-lasting protection against harsh environments.

Cortec VPCI® 414 es un limpiador desengrasante biodegradable a base de agua que también elimina revestimientos temporales como Cosmoline ™, Cortec VPCI 368, VPCI 388, VPCI 389, así como sustancias de cera sin silicona de superficies metálicas y pintadas. Caracteristicas Removedor temporal de revestimientos para trabajo pesado Eficaz como desengrasante ligero Eficaz como removedor de aceite ligero No es inflamable Puede utilizarse eficazmente a temperatura ambiente. Esto reduce la necesidad de aparatos de calefacción que consuman energía. VPCI 414 se puede utilizar en un baño caliente para la eliminación de hidrocarburos pesados ​​y revestimientos residuales. Líquido viscoso que se adhiere bien a techos y superficies verticales. Formulación lista para usar Efectivo cuando se usa a bajas concentraciones Continúa trabajando y proporcionando protección contra la corrosión incluso después de limpiar las piezas

Hydrophobic means to repel water. Applying a hydrophobic coating to a surface can help the surface repel dirt and residue for easier cleaning. These types of coatings also have an oleophobic property, meaning that oil and grease is also repelled. Knight Optical provide Hydrophobic Coatings to wide range of protective windows made from materials such as BK7 or equivalent, UV Fused Silica or Borosilicate. Benefits for hydrophobic are that is: Optically Clear Easy-to-Clean Fingerprint and Smudge resistant The properties of the optical component itself remain unaltered meaning it does to hinder its current application or require a redesign. This coating would be a custom item and can be applied to most of our stock optical components. If you would like to discuss how a hydrophobic coating can enhance your application contact our technical sales team whom can assist. Read PDF for full specification

Knight Optical can offer Flashed Opal Diffusers for use within Photography. We supply a range of Flashed Opal Diffusers for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within photography and entertainment industries. Flashed Opal Diffusers alter the divergence of incident light. Opal diffusers are typically used in to diffuse the flash from cameras to prevent photos with harsh light and hard shadows to soften and improve the appeal of the image. Also used in traditional imaging techniques for the control of illumination. Opal diffusers are coated with For more information read PDF ….. Material::White-flashed opal Shape::Square Diffusers, Circular Diffusers Dimensional Tolerances::+/- 0.25mm

Enhance your lighting experience with our best-selling range of Energizer's LED lamps and fixtures for residential and commercial markets. Crafted with consumer satisfaction in mind, Supreme takes pride in its in-house design of visually appealing, vibrant, and informative retail packaging. Discover the remarkable efficiency and affordability of Energizer® LED lights, a reliable brand you can rely on, as a superior choice for lighting solutions. Order online with ProviderEurope.com. DDP. MOV €500. Free shipping orders over €1000. contact enquiries@providereurope.com to request a quote.

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read the PDF.. Typical specs::. Material::Optical Glass or Acrylic Overall Diameter Tolerance::+/-0.2mm Focal Length Tolerance::± <5% Surface quality::<60-40 Scratch/Dig Coating::Optional

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read PDF …. Material::Optical Glass or Acrylic Overall Diameter Tolerance::+/-0.2mm Focal Length Tolerance::± <5% Surface quality::<60-40 Scratch/Dig Coating::Optional

Knight Optical can offer Littrow Prisms for use within Laser Applications. We supply a range of Littrow Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Laser Applications. Littrow Prisms are used near the end of an optical cavity of a laser system to finely adjust the output frequency by changing the AOI of the prism. For more information read PDF … Material::SF11 or equivalent, F2 or equivalent, UV grade fused silica Dimensional Tolerances::+/- 0.2mm Angles::+/- 1 arc minutes Surface Figure::< 0.5 waves Surface quality::< 40-20 Scratch/Dig Coating::Antireflective < 0.2% @ 550nm

Knight Optical can offer Light Guides for use within the Cosmetics Industry. We supply a range of Light Guides for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within the Cosmetics Industry. Our Light Guides are the key element in cosmetic laser, or intense pulsed light (IPL) applications. IPL is a cosmetic application commonly used for hair removal. IPL application have requirements of different wavebands and so our custom light guides are available in a choice of materials and coatings to suit your waveband requirements. For more information read PDF… Material::N-BK7 or equivalent, Sapphire and UV Fused Silica Dimensional Tolerances::+/- 0.1mm Surface quality::< 40-20 Scratch/Dig Coatings::< AR Coatings available on request

Knight Optical can offer transmit and receive windows and mirrors for LIDAR systems using visible, NIR (0.9 to 1.5µm) and Mid-Waveband Infra-Red (MWIR, 3 to 5µm) light. Since the 1960s, scientists have used LIDAR (light detection and ranging) to study the atmosphere. Short pulses of laser light are used to detect particles or gases in the atmosphere, like a radar bounces radio waves off rain drops in clouds. A telescope collects and measures reflected laser radiation, like a radar dish collects the radar signal, leading to a profile of the atmosphere's structure along the path of the laser beam. Researchers can then determine the location, distribution, and nature of atmospheric particles and molecular species using an advanced LIDAR method called the Differential Absorption Lidar (DIAL) technique. Read PDF for more information Material::BK7, Borosilicate, Quartz, Fused Silica or Sapphire (AL2O3) Diameter Tolerance::+0.0/-0.20 mm Length/Width Tolerance::+/- 0.10mm Thickness Tolerance::+/-0.10mm Wavelength Range::0.17 – 5.5µm Transmission::Tavg=85% dependant on substrate thickness

Knight Optical can offer Cube Beamsplitters for use within the Scientific Industry. We supply a range of Cube Beamsplitters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in the scientific industry for use as components within spectrophotometers and interferometer. For interferometry, beamsplitters are used to separate light into two beams to compare a reference against a sample. Cube beamsplitters offer some advantages over plate beamsplitters in that they don’t suffer from ghost images and are easier to mount. For more information read PDF… Material::N-BK7 (or equivalent), UV Fused Silica Wavelength Ranges::Visible (400-700nm), NIR (630-1100nm), Telecom (1050-1700nm) Dimensional Tolerances::+/- 0.3mm Parallelism::< 3 arcminutes Surface quality::<40-20 Scratch/Dig Coating::AR coatings for application bandwidth on external surfaces

Knight Optical can offer Lithium Fluoride Lenses for use within UV Applications. We supply a range of lithium fluoride lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers using UV optics such as UV lasers. UV lasers are beneficial in some applications as opposed to longer wavelengths such as infrared or visible light as they do not heat the areas around the target. This allows the laser the cut materials by breaking atomic bonds, rather than melting the material. Due to the large band gap for Lithium fluoride, it’s crystals are more transmittive to short wavelength UV radiation than any other material and are ideal for use in X-Ray monochromators, as for use in VUV, UV, Vis and IR spectrums. For more info read PDF… Material::Lithium Fluoride (LiF) Shape::Spherical Lenses, Cylindrical Lenses Dimensional Tolerances::+/- 0.1mm Parallelism::< 3 arcminutes Surface quality::<60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

Binoculars and Periscopes invert an image to make an object appear closer. There are two types of prisms that can be used for binoculars: Porro and Roof Prisms. Porro prisms are used in a pair to create an optical path. The image would pass through the first prism and which then inverts the image, the second prism then flips the image, so it is making the distant object appear closer. Roof prisms work in a similar fashion however are one prism and this design performs in the same way. Used particularly for smaller compact spaces as there are aligned in one piece to its objective lenses. Knight Optical’s Porro and Roof Prisms are available from stock, manufactured from high quality BK-7 or equivalent. They are also available to custom specifications with our capabilities for the two types: •General Dimensions: 5mm to 300mm+ •Angular tolerance: <3arcseconds •Surface form: <1/10th wave @ 633nm •Surface quality: 10:5 •Coating options: AR or Mirror Read PDF for Info

Knight Optical can offer you stock and custom mirrors Plane Mirrors (general, λ/1 and λ/4 for use in Spectromters, in a range of materials such as BK7 or equivalent, Quartz, UV Fused Silica and many more. These are customisable to size and coating depending on what you are trying to achieve. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. The mirrors help produce high quality signals and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: Plane mirrors are used to transmit the signal from the light source to the receiver in the spectrometer, the higher the specifications of the mirror the better the signal for it to produce a better transmission or reflection curve that it relatively to the sample. For more information read PDF… Material::Soda lime float glass, white plate, BK7 or equivalent Diameter Tolerance::+0/-0.2mm Lengths/ width::±0.3mm (≤100mm), ±0.5mm (>100mm) Thickness::±0.25mm Surface quality::<60-40 scratch/dig for general purpose, <40-20 scratch/dig for λ/4 Flatness:: λ/4 for polished substrates Parallelism::<3 arcmin Coatings::• Enhanced aluminium 94%R for visible applications.

Knight Optical can offer Hot Mirrors for use in Heat-Sensitive Systems. We supply a range of hot mirrors for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specs. What’s more, our Hot Mirrors are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers working with Heat-Sensitive Systems. Hot Mirrors are designed to transmit visible wavelengths and to reflect heat, causing infrared wavelengths. Hot mirrors have a sharp cut-off between Infrared (IR) and visible because they have a dielectric coating that can be controlled for different AOIs (most commonly 0°). For systems that require heat shielding while still needing visibility, hot mirrors can be used. These can attenuate IR radiation and allow visible light, which permits your temperature-sensitive equipment to be visible. Material::Borosilicate Shape::Circular Mirror, Square Mirror Dimensional Tolerances::+/- 0.1mm Parallelism::< 5 arcminutes Surface Accuracy: :< 5(2) @ 633nm Surface quality::< 40-20 Scratch/Dig

Knight Optical can offer Heat Filters for use in Heat Sensitive Systems. We supply a range of heat Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Sensitive Systems. Heat Filters are designed to transmit visible wavelengths to absorb or reflect heat causing infrared wavelengths preventing it from reaching your system. Care has to be taken in the design of systems using heat filters. Absorptive blockers will heat up with use and could result in damage to the filter. Reflective blockers will redirect the heat to another location in your system. For more information read PDF …. Material::Schott KG1, Dielectric Coated Borosilicate

Knight Optical can offer Fire-Polished Aspheric Lenses for use within Optical Systems. We supply a range of Fire-Polished Aspheric lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Aspheric lenses are used to correct for spherical aberrations and can be as effective a multi-lens system while taking up less physical space and reducing weight and cost. As such these lenses are often used in military applications, such as night vision goggles or missile guidance systems For more information read PDF ….. Material::B270 or equivalent, Borosilicate Dimensional Tolerances::+/- 0.25mm Surface Quality: :< 60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

Knight Optical can offer KG1 Filters for use in Heat Sensitive Systems. We supply a range of KG1 Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Sensitive Systems. KG1 Filters are designed to transmit visible wavelengths to absorb heat causing infrared wavelengths preventing it from reaching your system. Care has to be taken in the design of systems using KG1 as the material is an absorptive blocker and will heat up with use. To help alleviate the heating issue, our KG1 filters are thermally toughened For more information read PDF ….. Material::Schott KG1 Shape::Circular Filter, Square Filter Dimensional Tolerances::+/- 0.1mm Parallelism::< 5 arc minutes Surface Accuracy: :< 5(2) @ 633nm Surface quality::< 40-20 Scratch/Dig

Knight Optical can offer Meniscus Lenses for use within Optical Systems. We supply a range of Meniscus lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Any spherical surface will introduce spherical aberrations to an optical system. Meniscus lenses are designed with the curvatures of the lens in mind to minimise these spherical aberrations. This effect is more noticeable with higher index glasses as spherical aberrations increase with the change in index. Meniscus lenses can be an effective compromise on cost and aberration when compared to using aspheric lenses or multiple lens. Fore more information read the PDF…. Material::N-BK7 or equivalent, UV Fused Silica, SF11 or equivalent Shape::Positive Meniscus, Negative Meniscus Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface quality::< 40-20 Scratch/Dig Surface Figure::< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required)

Knight Optical can offer Cylindrical Lenses for use within Optical Systems. We supply a range of cylindrical lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with optical systems. Cylindrical lenses are designed to light to a straight line, rather than a point. Cylindrical lenses are often used to change the profile of laser beams, for example to correct for astigmatism and elliptic shape in diode lasers or to generate lines from single mode lasers. For more information read the PDF… Typical specs::. Material::N-BK7 or equivalent, UV Fused Silica, SF11 or equivalent Dimensional Tolerances::+/- 0.1mm Shapes::Diameter/Rectangular, Convex/Concave Centering::< 3 arcminutes Surface quality::< 40-20 Scratch/Dig Surface Figure: :< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required)

KO can offer Metallic Neutral Density Filters for use in Photographic Applications. We supply a range of Metallic Neutral Density (ND) Filters for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specifications. What’s more, our Metallic ND Filters are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Our Metallic ND Filters reflect (with a metallic coating) light neutrally over a wavelength range (typically visual). They can be used to lower the intensity of light prior to the image plane. These are often used in photography, allowing photographers more flexibility with their setups to achieve desired effects. Often, an ND filter will be used in conjunction with a long exposure to prevent washed-out and overexposed images. They can also be used to add motion blur, reduce depth of field and to use a wider aperture. For more information read PDF… Shapes: :Circular Filters, Square Filters Dimensional Tolerances::+/- 0.1mm Flatness::< 5(1) @ 632.8nm Surface quality::< 40-20 Scratch/Dig

Knight Optical can offer custom Rod Lenses for use within Optical Systems. We supply a range of custom & stock Rod lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Rod Lenses are a special variant of cylindrical lenses so they focus light to a line. Rod lenses have an outside face that is polished and the ends are ground. Typical uses for rod lenses would be to generate a line image from a circular laser beam. Rod lenses can be cut at 45 degrees for use in beam steering and other similar applications. For more information read PDF ….. Material::N-BK7 or equivalent, Borosilicate, UV Fused Silica Shapes::Plane, 45° Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface quality::< 40-20 Scratch/Dig Surface Figure: :< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required) Mounting::Available on request

As well as Knight Optical’s Low GDD Ultrafast Laser Mirrors, we can also provide broadband and wide-angle alternatives to cover more of a range of applications. Our Wide-Angle Laser Mirrors optimised for the fundamental and second harmonic (SHG) emissions of Ytterbium (Yb) doped lasers including diode-pumped solid-state (DPSS) and fiber lasers, and therefore have a design wavelength of either 515nm or 1030nm. They exhibit > 99.9% reflection when used between 0 to 45°. The Broadband Laser Mirrors work from 700-900nm ideal for applications using a Ti:Sapphire laser, again demonstrating > 99.9% reflection within this wavelength range. Their key features include: •Ion beam sputtered (IBS) coating which is compact and durable. •Reflection > 99.9% within their design wavelength range. •Broadband laser mirrors work at 45° •Exhibit minimal group delay dispersion (GDD) to prevent pulse broadening •High laser induced damage threshold (LIDT) •Precision flatness and surface quality to Material::UV Fused Silica Diameter::+0/-0.1mm Thickness::+/-0.1mm Surface Quality S1:< 10/5 for 12.7mm/25.4mm diameters Surface Quality S2::< 80/50 Flatness Clear Aperture::80% or specified aperture Parallelism::< 5 arc mins Chamfer::0.1-0.4mm Coating S1::R>99.9% @ 700-900nm, AOI 45°, |GDD Rs| < 20 fs2

Knight Optical can offer dichroic bandblocking filters for use in Fluorescence Microscopy. We supply a range of dichroic bandblocking filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in fluorescence microscopy. Dichroic bandblocking filters are used to block a specific wavelength band and transmit the rest. Our Dichroic bandblocking filters are usually made for bands between 300-1200nm. Our dichroic filters are usually specced for a 0° AOI. Use at a 45° results in a CWL shift of around 35-50nm. They are used as beamsplitters in fluorescence microscopy to transmitting For more information read PDF…. Material::Borosilicate Dimensional Tolerances::±0.1mm Wavelength Range::CWL between 300-1200nm Wavelength Accuracy: :± 5nm Peak Transmission::> 95% out of band FWHM: :Dependant on type Surface quality: :< 40/20

Fanta Orange 24 x 330ml Bright, bubbly, instantly refreshing and great tasting! Fanta Orange is made with 100% natural flavours, fruit juice and is caffeine free. Serve ice cold for maximum refreshment. Keep one cold in the fridge. Contains 24 individual 330ml cans. Fanta Orange is a sparkling orange fruit soft drink. Made with fruit or fruit juice. With natural flavours. No artificial colours. This product is GMO, gluten and allergen free. This product is suitable for vegetarians/vegans.

Coca-Cola Original is a Sparkling Soft Drink with Vegetable Extracts and is perfect for refreshments. This product is GMO-free, gluten-free and allergen-free. It is suitable for vegetarians/vegans. Ingredients: Carbonated Water, Sugar, Colour (Caramel E150d), Phosphoric Acid, Natural Flavourings including Caffeine