Produktai skirti gali (622)

The µCAN.4.ti-BOX features 4 inputs for measuring temperature sensors such as RTD and thermocouples with 400 Hz total sampling rate. The CAN interface supports the protocols CANopen and J1939.Temperature Thermo type J, K, N, R, T Temperature Thermo type J, K, N, R, T:Temperature Pt100, Pt200 (2- / 4-wire) Temperature Pt500, Pt1000 (2- / 4-wire):Accuracy +/- 0.1 K Resolution 16-bit (0.1 °C):Sampling rate 10 ms / 400 Hz Fieldbus CAN:Protocol CANopen / Raw CAN

The µCAN.4.ai-F1 is the versatile universal measuring module for analogue standard signals. The module is designed to measure +/- 40 V or -20…+20 mA signals at an overall sampling rate of 4 kHz. Strain gauge full bridge:Voltage +/- 60 mV Supply voltage 4.096 V:Accuracy 0.01 % (FS) Resolution 24-bit (0.01 µV):Sampling rate 1.25 ms / 800 Hz Parameterized via set-up software:Casing powder coated Fieldbus CAN:Protocol Raw CAN

The decentralized module µCAN.4.ao-BOX features four analogue outputs which optionally provide a voltage signal (+/- 10 V) or a current signal (0…20 mA). The CAN interface supports the protocols protocols CANopen and J1939. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz:Signal type freely configurable Fieldbus CAN:Protocol CANopen / Raw CAN / J1939

The µCAN.1.ti-BOX is the single channel solution for the acquisition of temperature signals. Resistance sensors as well as thermocouples may be connected to the module. The CAN interface supports the protocol CANopen. Temperature Thermo type J, K, L:Temperature Pt100 (2- / 4-core) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.1 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Fieldbus CAN:Protocol CANopen / Raw CAN

4-channel temperature acquisition module for PT100 or thermocouple with CAN - The µCAN.4.ti-F1 is the universal measurement module for mobile acquisition of temperature data. Depending on the module type, resistance sensors as well as any kind of thermocouple can be polled at an overall sample rate of 4 kHz. Temperature thermo type K:Temperature Pt100, Pt200 (2- / 4-wire) Temperature Pt500, Pt1000 (2- / 4-wire):Accuracy +/- 0.05 K Resolution 24-bit (0.001 °C):Sampling rate 1.25 ms / 800 Hz Parameterized via set-up software:Equipped with cold-junction compensation Casing powder coated Fieldbus CAN:Protocol Raw CAN

The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface. Voltage:± 10 V Current:0 mA - 20 mA Resolution:16-bit (1 mV / 1 µA) Sampling rate:up to 1 kHz Fieldbus:CAN classic / CAN FD Protocol:CANopen / CANopen FD / J1939

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Temperature Pt100, Pt200 (2- / 4-wire):Temperature Pt500, Pt1000 (2- / 4-wire) Accuracy +/- 0.5 K:Resolution 16-bit (0.1 °C) Sampling rate 10 ms / 100 Hz:Signal type freely configurable Operating temperatures -40…+85 °C:Power supply voltage 9…36 V DC Fieldbus CAN:Protocol CANopen / Raw CAN

CAN FD (CAN flexible data rate) is an expasion of the “classical” CAN bus (CAN classic) and is defined by the standard ISO 11898-1:2015. CAN FD facilitates not only sending of larger data volumes (payload): the limit of 8 bytes with CAN classic has been increased to 64 bytes with CAN FD. Also, it provides the possibility of a higher bit rate within the data phase, even going beyond the previous limit of 1 MBit/s.

The module µCAN.1.ti-SNAP is designed to acquire temperature signals via Pt100 or J, K and L type thermocouples. Temperature Thermo type J, K, L:Temperature Pt100 (2- / 4-wire) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.1 K (Pt100, Pt1000) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Signal type freely configurable:Protocol CAN / CANopen / Raw CAN

Kosmetikdose – Serie Wet & Dry ARTIKEL-NR.: 100.303 Bezeichnung: runde Dose mit flachem Deckel mit Sichtfenster und Spiegel, mit Zwischenboden Einsatzbereich: Kompaktpuder, Rouge, Make-Up Außendurchmesser: 73,0 mm Höhe: 19,0 mm Pfannendurchmesser: 60,0 mm Zubehör: Siebeinsatz Artikelnummer: 100.303 Bezeichnung: runde Dose mit flachem Deckel mit Sichtfenster und Spiegel, mit Zwischenboden Außendurchmesser: 73,0 mm Höhe: 19,0 mm Pfannendurchmesser: 60,0 mm Zubehör: Siebeinsatz

The µCAN.1.ai-BOX is a decentralized universal data acquisition module for analogue standard signals (current / voltage). The CAN interface supports the protocol CANopen. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.01 % (FS):Resolution 16-bit (1 mV / 1 µA) Sampling rate 20 ms / 50 Hz:Galvanically isolated fieldbus Feldbus CAN:Protocol CANopen / Raw CAN

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Voltage +/- 10 V:Accuracy 0.01% (FS) Resolution 16-bit (1 µA):Sampling rate 5ms / 200 Hz Operating temperatures -40…+85 °C:Operating temperatures -40…+85 °C Fieldbus CAN:Protocol CANopen / Raw CAN

The module µCAN.1.sg-SNAP is designed to acquire strain gauge measurement signals such as forces, torques, sequences and voltages and transfers them via CAN. Voltage 0…100 mV:Supply voltage 9.0 V Strain gauge full bridge:Sampling rate 20 ms / 50 Hz Accuracy 0.1 % (FS):Resolution 16-bit (1 mV) Fieldbus CAN:Protocol CANopen / Raw CAN

The transducer unit µCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors. The integrated CAN interface supports CANopen and J1939 protocols. Bit rate and node-ID may be set via DIP switches inside the device or via LSS. Temperature thermo type J, K, L, N, R, T:Temperature Pt100/Pt1000 (2-wire) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.2 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Sensor error detection:Protocol CAN / CANopen / Raw CAN / J1939

The µCAN.8.dio-SNAP is a freely configurable digital I/O module featuring 8 channels. Module ID and bit rate can be set via DIP switch or via CAN bus (LSS, CiA 305). The module supports the protocols CANopen CANopenFD and J1939. Digital input or output:Input or output freely configurable Output drivers can be supplied separately:Each output to be charged with max. 1 A Each output to be charged with max. 1 A:Fieldbus CAN / CAN FD Protocol CANopen / CANopen FD:Protocol CANopen / CANopen FD

The cable transmitter µCAN.1.sg-TRS is the universal data acquisition module for standard analogue full bridge strain gauge signals. The bridge is powered via the transmitter. The TRS family is ideally suited for being integrated directly in the measuring lines at a short distance from the sensor. Voltage ± 20 mV:Supply voltage 4.5 V Strain gauge full bridge:Accuracy 0.2% (FS) Resolution 16-bit (1 µV):Sampling rate up to 1kHz Fieldbus CAN classic / CAN FD:Protocol CANopen / CANopen FD / J1939

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Temperature thermo type K:Accuracy +/- 0.5 K Resolution 16-bit (0.1 °C):Sampling rate 10 ms / 100 Hz Sensor error detection:Equipped with cold-junction compensation Operating temperatures -40…+85 °C:Power supply voltage 9…36 V DC Fieldbus CAN:Protocol CANopen / Raw CAN

The modul µCAN.4.ao-SNAP features four independent analogue outputs which optionally provide a voltage or a current signal. The CAN interface supports CANopen and J1939 protocols. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz:Signal type freely configurable Fieldbus CAN:Protocol CANopen / Raw CAN / J1939

The µCAN.8.pwm-SNAP unit is equipped with 8 outputs which provide pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.) PWM output:Basic frequency 40 Hz … 5 kHz Mark-to-space ratio 0.0 % … 100.0 %:Each output to be charged with max. 1.4 A Fieldbus CAN:Protocol CANopen / Raw CAN

The cable transmitter µCAN.1.ti-TRS is designed for the acquisition of one temperature signal and its digitization for being processed via CAN bus. The TRS module is integrated directly in the measurement line at a short distance from the source to avoid interference effectively. Temperature Thermo type J, K, L:Temperature Pt100, Pt1000 (2-wire) Accuracy ± 0.5 K (Thermo):Accuracy ± 0.2 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate up to 1 kHz Fieldbus CAN classic / CAN FD:Protocol CANopen / CANopen FD / J1939

The µCAN.4.ci-BOX is equipped with 4 fast counters of up to 100 kHz. The CAN module acquires and processes the binary pulses and transmits them to a higher-level system. Counter input / frequency measurement:A/B signal Max. input frequency 500 kHz:High precision frequency measurement Signal type freely configurable:Up or down counter Fieldbus CAN:Protocol CANopen / Raw CAN

Ein CAN-Controller am Ausgang ermöglicht die Einbindung in das CANopen-Netz. Nach CANopen Application Layer and Communication Profile, CiA Draft Standard 301, Version 4.1 und nach „Device Profile for Encoders CiA Draft Standard Proposal 406 Version 3.0“ und CANopen Layer setting Services and Protocol (LSS), CiA DSP 305. Inkremental oder absolut:Absolut Schnittstelle:CANopen Single- oder Multiturn:Singleturn Bauform:42mm Gehäusematerial:Aluminium, Edelstahl Flansch und Welle:Synchroflansch Auflösung:4096 Schritte/360°<) Codeart:Binär Profil:CANopen nach CiA, DS 406 Revision 3.0 Elektrischer Anschluss:Kabel 1m