Produktai skirti factori kabelių viela (3)

FOAM-SKIN-PE INSULATED, QUAD TWISTED, JELLY FILLED TELECOMMUNICATION CABLE Cable for outdoor application designed for high frequency XDSL-connections for blowing technique FILLING:petrol jelly OVERALL SHIELD, REINFORCEMENT:unshielded PRODUCT SUITABILITY:Telecommunication cable ladder:solid, bare copper wire Ø 0.6 mm Insulating sleeve:Foam skin PE Verseilung:Four cores each stranded to form star fours, star quads to form a cable core, a drain wire filling:Cable core filled with petrolatum, wrapped with plastic tape Mantel:PE, orange Moisture barrier:0.15 mm aluminum tape with polyethylene (0.05 mm) coated on both sides Conductor diameter:0,6 mm Conductor resistance:≤66 Ω / km Change in resistance:≤2 % Insulation resistance:≥5 GΩkm Operating capacity:≤55 nF / km Propagation speed (1MHz):≤60 % Ader / Ader:700 Veff/50Hz/1min Characteristic impedance (1-60 MHz):110 ±15% Ω

PE-INSULATED, LOCAL TELECOMMUNICATION CABLE WITH COPPER SHIELD In all kinds of operating premises (excepted locations with special protection demands - like in fire or highly combustible premises); e.g. for local area networks of the telecom, as station communication cables and for small telephone networks of industry, traffic and public utilities. FILLING:unfilled OVERALL SHIELD, REINFORCEMENT:copper braid or tape PRODUCT SUITABILITY:Telecommunication cable ladder:solid, bare copper wire Ø 0.8 mm Insulating sleeve:PE ( 2Y ) Verseilung:four cores to star fours each; Star quads stranded in layers to form a cable core umbrella:Wrapping with copper tape ( C ) Mantel:PE, black ( 2Y ) laying:Suitable for laying in earth, water, cable ducts, pipelines, etc. imprint:<Telephone receiver> <meter> Regulation:TLB X5019 (03.67) Conductor diameter:0,8 mm Loop resistance:≤73,2 Ω / km Insulation resistance:≥10 GΩkm Operating capacity (at f = 800Hz):≤55 nF / km Operating voltage:200 VAC Ader / Ader:500 V / 50Hz Core / screen:2000 V / 50Hz laying:-20 to +50 °C business:up to +70 °C

RAILFOOT CABLE, LOOSE TUBE CONSTRUCTION, METAL-FREE, WATERTIGHT, RODENT PROTECTION, ALUMINIUM-PE-COMPOSITE-LAYER SHEATH, STEEL WIRE ARMOURING The fiber-optic railfoot cable is designed for use in telecommunication systems. It can be laid directly on the rail foot or other areas subjected to vibrations and impacts, but is also suitable for fixed laying in cable ducts, conduits or direct burial. FILLING:dry filling / swellable materials OVERALL SHIELD, REINFORCEMENT:composite layer (L) round steel wires PRODUCT SUITABILITY:Railway cable fiber optic cable Fiber colors:red, green, blue, yellow Tube colors:first tube red, other tubes yellow Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – meter tube diameter mm:2,0 number of tubes:6 max. fibers / tube:4 max. number of fibers:24 tensile strength approx. N:3.500 weight approx. kg/km:310 outer diameter approx. mm:15,6 tensile strength:see above table specification:DB TL 416.0510 compressive strength (crush):3000 N/10 cm impact:25 Nm torsion:5 cycles ±360° kink, cable:The cable do not form a kink when a loop is drawn together to a diameter 12 times water penetration:No water on free end