Produktai skirti duja produktai (153)

R404A is an HFC blend. It is a colourless, non-flammable gas mixture at atmospheric pressure with a slight odour. Supplied in low pressure cylinders. All fluorocarbon refrigerant gases contain one or more carbon and fluorine atoms and are organic compounds. Atoms of chlorine, hydrogen and bromine may also be present.

Débitmètres universels Les débitmètres à section variable VA 40 sont conçus pour mesurer le débit de gaz et de liquides. La version standard de l'appareil existe avec différents raccordements conformes aux normes. Le cône de mesure en verre, protégé par un manchon en métal avec ouverture permet une lecture du débit et une observation du produit faciles et directes. Sa conformité pour la mesure du débit de gaz conformément aux prescriptions de la fiche DVGW G260 a été certifiée par le laboratoire d'essais DVGW auprès du Gas-Fired Thermal Energy Institute (Essen, Allemagne). Fluide::pour gaz Technologie::à flotteur Autres caractéristiques::à tube de verre; en ligne Température de service:-20...+100°C / -4...+212°F Pression de service:jusqu'à 7/10 bars (en fonction de DN) Plage de mesure pour les gaz:de 7 à 310.000 l/h (air : 20°C, 1,013 bar) Limite supérieure de mesure pour les gaz:de 7 à 310.000 l/h (air : 20°C, 1,013 bar)

0203 micro - Table CNC Laser Machine The Wattsan 0203 micro is a tabletop laser machine designed for hobby and small-scale production. Compact and relatively light, this laser machine can be placed on a work surface or even a table and is ideal for use in workshops or garages. Engraving : wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, glass, stone etc. Cutting : wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber Laser machine Wattsan 0203 micro is equipped with a 40W laser tube. Tube service life = 1500h. Work area = 200 x 300 mm Tube power = 40W Max engraving speed = 700 mm Dimensions = 810 mm * 500 mm * 265 mm Net Weight = 38 kg

We also supply renowned customers on an international level with our products for conveying technology (gas and oil extraction) and their gear units. Here is an overview of our production possibilities: Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible We manufacture for different customers: railway, wind power, shipping, conveyor technology, industry and special machine construction. Production is carried out according to customer drawings and standards. Further information in the first interview. We look forward hearing from you.

Les systèmes de marquage avec un laser CO2 font partie des lasers à gaz. Le rayon laser est généré dans des tubes lasers fermés remplis de dioxyde de carbone. Le système REA JET CL est parfaitement adapté pour l'identification des emballages, du verre, du bois, des matériaux plastiques, du PVC, de l'aluminium anodisé, le décapage des peintures des surfaces ainsi que le marquage direct des produits alimentaires. Liberté absolue de conception des textes, graphismes et composition de caractères. Applications — Identification de verre, bois, caoutchouc, gravure et couleur de couverture des matériaux plastiques (automobile, produits médicaux, biens de consommation). — Marquage de boîtes pliantes et d'emballages (par ex. des secteurs pharmaceutiques, cosmétiques et produits alimentaires) — Substrats revêtus (par ex. aluminium anodisé) — Marquage direct des produits alimentaires — Identification de cartonnages et couleur de couverture au laser — Gravure en couleur miroir Classe de protection:IP 65 Unité laser:CL210, CL230, CL260 Puissance du laser:10W, 30W, 60W Longueur d'onde:9,3 µm, 10,2 µm, 10,6 µm Alimentation électrique:95-250 V AC (Autorange) 50/60 Hz Angle de faisceau émergent:Réglable en continu Distance par rapport au produit:100 mm - 300 mm Contrôle des miroirs:Digital Dimensions L x l x H (mm):787 x 137 x 180 / 898 x 137 x 180 Poids:14 kg / 18 kg / 25 kg

REFRIGERANT R134A disposable cylinder factory purity 99.9% R134a refrigerant gas..

Joints pour flexibles Butane / Propane En NBR ou en Viton® Conformes aux normes en vigueur (NF D36-125, NF D36-121, NF D36103,…)

* FriCon - gas dehumidification * Gas heaters * ActiCo - activated carbon filters * Gas compressors * Process gas heat exchangers

TS EN 676 + A2 çerçevesinde CE 1312 sertifikasyonu ile üretilen üflemeli tip Üret Gaz Brülörleri tek kademe, iki kademe ve oransal tiplerlerde üretilir. Özel olarak imal edilen türbülasyon sistemi sayesinde hem Doğalgazda hem de LPG ve Propan gibi dökme gazlarda mükemmel yanış sağlar. Üret gaz brülörleri yüksek verimli ve ekonomik olmasının yanı sıra gaz hava basıncı degişikliklerine voltaj degişimlerine son derece duyarlıdır. Kapasite aralığı haricinde gerçeklesen basınç ve voltaj hareketliliğinde gerekli emniyet sistemleri devreye girerek maksimum güvenlik sağlar. Brülörlerin üzerinde kullanılan ithal mamüller uluslararası tanınan A kalitededir. Yerli mamullerde ise TSE ve CE belgesi olanlar kullanılmaktadır.

Waschbürste mit Griff

Wanneer u een hoge stoomvraag heeft is het mogelijk om verschillende CERTUSS stoomketels in serie aan elkaar te koppelen. Een meervoudige stoominstallatie kan bijvoorbeeld bestaan uit twee elektrische stoomketels, maar ook uit 3 of 4 gasgestookte stoomketels. Mogelijk heeft u al een goedwerkende CERTUSS stoomketel, waarvan de stoomproductie niet meer toereikend is. In dat geval zou het creëren van een meervoudige stoominstallatie door de plaatsing van een tweede kleinere stoomketel een voordeligere investering zijn dan de vervanging door één grotere stoomketel. Wat zijn voordelen van een meervoudig stoomsysteem? Een van de voordelen van een meervoudige stoominstallatie is dat er een zeer flexibele stoomtoevoer mogelijk is. Zo kan door middel van een geïntegreerd systeem onderscheid worden gemaakt in basis en piek toevoer. Zo kunnen bijvoorbeeld twee stoomgeneratoren in een drievoudig systeem zorgen voor de basislast.

We are seller of oil and gas products. For any product or quantity please contact us asap.

Zubehör für Caravan-Tankflaschen Tankstellenverzeichnis/Europa Art.-Nr: 20039

Gas equipment designed for cooking, heating and hot water supply, including equipment as a part of combined devices Modular automatic burners (gasfired and combined) and gasequipment with modular automatic burners for cooking, heating and hot water supply Devices designed to be built in gasusing equipment and operated separately from equipment mentioned above including control, adjustment and safety appliances Steam boilers with steam pressure over 0,07MPa and hot water boilers with water temperature over 115 °С Equipment designed to be used in manufacturing processes at industrial facilities, except for the technical devices included in the list of gasusing equipment in which respect the requirements of TR CU 016/2011 are specified Equipment using gas as motor fuel Requirements of TR CU 016/2011 are set with regard to gasusing equipment listed in Annex № 1 to the Regulations.

UNIQUEMENT VENDU PAR PAQUET DE 100 UNITÉS INDISSOCIABLE Référence:M131F38

Gas-Pro of the company Crowcon is developed for protection in tight, dangerous areas. Gas-Pro offers display up to 5 gases in a compact, robust solution, which Resist tough areas and everyday use! Features of Gas-Pro Measurement up to 5 gases at the same time Clear dispay on top of the device, with two-coloured back lightening Internal pump (optional) Automatic, fail-safe detection of suction adapter Special mode for use before access Three-coloured safety- display Obvious alarm display: vibration alarm, signal tone >95dB and clearly visible red/blue LEDs Integrated, shock-proof casing with protection class IP65 & IP 67 against penetration of water and dust Suitable for use with newest gas test stations, for portable use, wall- or table assembly. Following gases can be measured (max. 5/device): Combustible gases (Ch4; 0-100%LEL) Chlorine (0-5 ppm) Carbon dioxide (0-5 vol.%) Carbon monoxide (0-500 ppm) Ozone (0-1 ppm) Oxygen (5-25 vol.%) Sulphur dioxide (0-10 ppm) Hydrogen...

OEM gaz ocak gruplama, gazlı ve elektrikli ev aletleri için parça üretimi.

Wir bieten Ihnen eine große Auswahl an technischen Gasen; Pfandflaschen, Kauf-/Tauschflaschen als Einzelflaschen oder Bündel in allen gängigen Größen

Wir führen verschiedene Produkte um das "Gas", ob Propangas, technische Gase, medizinische Gase oder auch nur um einen Luftballon zu schweben zu bringen. Bei uns finden Sie fast alles. Übersicht Unserer Produkte: Schutzgase : • Argon-Gemsiche • Stickstoff • Helium • Kohlendioxyd Edelgase: • Ballongas und Zubehör Kohlensäure: • für Haushalt, Gastronomie und Aquarien Medizinische Gase: • medizinischer Sauerstoff • medizinische Kohlensäure Propangas: • für Industrie, Haushalt und Freizeit • Staplergas (Treibgas) für Flurförderfahrzeuge Flaschensysteme: • Mietflaschensystem • Eigenflaschensystem • Pfandflaschensystem Gastechnisches Zubehör: • für Industrie, Handwerk, Haushalt und Freizeit Gasprüfungen: • nach DIN607 für Caravane und Wohnmobile

Gasverkauf von technischen, medizinischen- und Labgorgasen.

Gaswaschflasche 100 ml, komplett mit FritteP1.

NON STERİL SPANÇ Hidrofilize edilmiş, yüksek emici güce sahip ve pamuk ipliğinden üretilen gazlı bezin, kare ve dikdörtgen olarak otomatik katlama makinalarında katlanarak hazırlanan, yaraya yapılan operasyon sırasında temizlik ve doku üzerinde tampon yapmak için kullanılan tıbbi sarf malzemedir. Kenarlarından lifler vermeyecek şekilde cerrahi katlama biçimiyle katlandığı için, yarada oluşabilecek muhtemel enfeksiyon riskini azaltır. Hidrofil özelliği sayesinde kanamalara karşı yüksek emici özelliğe sahiptir.Non steril olarak üretilmekte olan gaz kompres ve spanç grubu, 5 cm x 5 cm – 7.5 cm x 7.5 cm – 10 cm x 10 cm– 8 cm x 18 cm ebatlarında 4, 8 ,12 ve 16 kat olarak hazırlanmaktadır. Müşteri talepleri doğrultusunda çeşitli ebat ve katlarda üretilmektedir. Ürünün röntgende görünebilirliğini sağlamak için, istek doğrultusunda radyopak iplikli olarak da üretilmektedir.

Immagina di poter abbattere i cattivi odori, in attività a rischio di fughe di gas tossici e in totale sicurezza. Ora puoi, ecco la mia soluzione!

Frästeilfertigung des Bauteils für die Montage von Gasturbinenschaufeln auf 5-Achsen Fräsmaschine. Komplettvermessung auf der 3-D Koordinatenmaschine.

You can choose the type and volume of the production system that suits your needs and application area’s specifications and customize the requested system according to your needs. OXY World PSA Oxygen Production system consists of a compressor, an air tank, a dryer, an oxygen generator, and an oxygen tank. The air, taken from the environment through the compressor, is stored in the air tank. The moisture in the air that passes from the air tank to the dryer is separated, this air is filtered in the active carbon tower, and dry air is delivered to the oxygen generator to obtain oxygen. When the dry air reaches the oxygen generator, it is separated through Zeolite and transformed into pure oxygen. Medisam Healthcare Systems, with its extensive experience spanning many years, advanced technical equipment, and a workforce of experts in the field, can manufacture oxygen systems of different specifications and sizes tailored to your hospital’s needs.

DLR manufactures high-temperature and high-pressure rubber seals and packers for the oil and gas (storage) industry for both wellhead or Christmas tree applications. We also manufacture vapour barrier materials that provide secondary sealing for large storage tanks to prevent vapour losses, along with packers for oil and gas applications. We combine our rubber compounding expertise with our precision rubber moulding capabilities to produce high-performance that withstand extremes of temperature and pressure to American Petroleum Institute (API) standards. And in an environment where safety is a paramount concern, our products can be relied upon.

Schutzgasanlagen und Zubehör

Ton Tank ISO Tank Packing R22 R134A R410A R404A R507 Refrigerant Gas Height:420mm Material:DC01 Diameter:241mm Capacity:13.3L Working Pressure:1.8Mpa Packing:carton size 24.5*24.5*42.5cm Thickness:1.0mm Weight:2.52kg Filling Gas:R22/R134A Dimensions:122 × 121 × 451 cm

Maintenance and repair work on the natural gas network is generally carried out with the pipeline being gas-free, so the relevant pipe sections are isolated by installing valve assemblies and the gas in the isolated section is vented to atmosphere. By using our mobile compressors – individually or in highly efficient parallel operation – the network operator can transfer the gas from the isolated pipe section to another part of the system so it does not have to be vented to atmosphere. Connection points for the mobile compressors are available e.g. in the area of the main line valves or can generally be retrofitted. It makes economic sense to transfer the gas to another as this guarantees responsible handling of this primary energy source and makes a substantial contribution to protecting the environment. Services offered: Pipeline recompression until lowest residual pressure < 3bar Reduction of methane emissions by up to 95% Responsible handling with primary energy

Flexible Fertigung im TM- (Transfer-Moulding), CM- (Compression-Moulding) und IM-Verfahren (Injection-Moulding).