Produktai skirti diržas (1215)

Silicone conveyor belt 1-ply white

PU timing belt T-Pitch T2,5 / T5 / T10

Silicone conveyor belt 1-ply light blue

KEIPER conveyor belts are made of fully synthetic polyester or blended fabrics and can be adapted for a specific purpose by means of different designs as well as appropriate coatings and surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitable for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

PU conveyor belt 1-ply white

Our endless turned round belts are wound either out of one homogeneous strand or one cord and spliced endlessly without thickening. For special applications, it is possible to vulcanize the inner splice or to make a special splice based on our in-house engineering methods. This increases the tensile strength by up to 60%. In elastic types, the core is welded. In view of their special structure, twisted round belts exhibit very quiet running properties, are extremely flexible and, thus, make possible very small minimum pulley diameters of 3x belt diameter. For several types, speed up to 70,000 rpm is possible; however, the speed of 60m/s should not be exceeded. Elastic types: PU, Vulkollan Semi-elastic types: PA.6, Set-Polyester, Nylon, HE Types with limited extensibility: Polyester, Nomex, Nomex-PTFE, Polyester-PTFE, Kevlar/Twaron, PA.6 anti-static, PBO

PVC conveyor belt 2-ply

Flat belt catalog

Neoprene endless molded timing belts (form belts)  HTD D5M / D8M / D14M

Polyester felt belt antistatic

Neoprene endless molded timing belts (form belts)  HTD 5M / 8M

Structure of germanBelt® fabric conveyor belts Fabric reinforcement: Our fabric conveyor belts are reinforced by 2-5 rot-resistant plies made of synthetic EP or PP fabric. These fabrics possess a good tensile strength/weight ratio, have excellent flexibility and troughability, low elongation, high impact resistance and good chemical resistance. Covers: The carcass of the fabric belts is protected by covers. Cover qualities or grades are characterized by the conveyor belts’ chemical and physical properties. Inclined systems require cleats or fabric conveyor belts with grooved surfaces. Cover thickness depends on the properties of the transported material and on loading conditions. Skim layers: Rubber skim layers in the fabric conveyor belt’s carcass provide excellent adhesion between the plies and efficient distribution of tension. They also absorb impact stress caused by dropping material.

Keiper belt coatings The coatings for timing belts, V-belts, flat belts and transport belts always are selected so that they are optimally suited for the product to be transported and/or the intended transport purpose. Many innovative and structural tasks, which may call for pacing, separating and positioning in the material flow, can be realized by adding profiles and entraining elements.

PU conveyor belt 2-ply white, fabric

germanWell® Corrugated Sidewall Conveyor Belts for Inclined Transport of Bulk Materials We use self-produced sidewalls with profile heights from 40 mm to up to 300 mm. In combination with our cleats, which we also manufacture ourselves, we can design and produce the optimal corrugated sidewall belt whatever the individual case. Our germanWell® corrugated sidewalls for sidewall conveyor belts are available in standard quality and in oil or grease resistant quality and with or without biased fabric. Please see our product brochure for more details on the germanWell® corrugated sidewall conveyor belt product range.

Round hook belts are the ideal solution for power transmission or conveying systems where several belts run on one shaft. Since they are easy to install, downtimes and maintenance costs can be reduced significantly. The hook belts only have to be inserted. Then the belt is joined to the hook and the second side of the hook is closed with pliers. Thus, there is no time-consuming and cost-intensive assembly work.

PVC conveyor belt 2-ply black mat

PU conveyor belt 1-ply white

PU V-belts run individually or alongside one another and convey products on slightly ascending or descending conveying systems without allowing the products being transported, e.g. boxes, tiles, glass slabs, cardboard articles etc., to slip. In addition, PU V-belts are used for driving live roller conveyors. Standard stock program: 75° Sh.A red 80° Sh.A transparent, FDA 80° Sh.A sky-blue, FDA 85° Sh.A green 90° Sh.A white Profiles 6x4 / 8x5 / 10x6 / 13x8 / 17x11 / 22x14 Smooth or notched

The KEIPER belt series RAPID conveyor and process belts is available in polyester, cotton or blended fabrics, with special coatings such as neoprene, silicone, non-woven fabric and many more, in a wide range of colors suitable for the specific application, and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Neoprene timing belts are manufactured in a sophisticated process with state-of-the-art production engineering. They are made of chloroprene with glass-fiber cords and protective fabrics on the carrying surface.The high-performance timing belts of the Premium Series were especially developed for heavy-duty and high-speed power transmission tasks. Improved materials and an optimized combination of materials provide even more performance.Profiles: MXL, XL, L, H, XH, XXH DXL, DL, DH 2M, 3M, 5M, 8M, 14M, 20M D5M, D8M, D14M 3MP, 5MP, 8MP, 14MP (Premium Series) S3M, S5M, S8M, S14M, DS8M Properties: Form-fit, synchronous running Longitudinal stability, negligible elongation Low noise and resistant to abrasion Maintenance-free Positional accuracy, isogonic Flexural fatigue strength High belt speed

The Keiper UNITRANS conveyor belt series can be fitted with numerous different entraining elements and tracking guides. Entraining elements are used for ascending or descending conveyor systems, linear movements and when lateral forces occur. With these elements it is easier to carry along, transport and place the products to be conveyed. Tracking guides are used to ensure directionally correct and stable guiding of the belt on the conveying system and to prevent the conveyor belt from running off. Conveyor belt entraining element or tracking guides made of PVC and PU in blue, white, green, petrol or transparent. V-shape, rectangular or block tracking guides. Smooth or notched design. Depending on the design, oil and grease resistant, with FDA/EU approval.

Keiper self-guiding PU track timing belts are made of abrasion-resistant polyurethane and high-strength steel cords or aramid cords and produced in open lengths. The V-guide is either integrated in the timing belt during production or welded into the belt later. These timing belts exhibit the same properties as standard timing belts. In addition, axial movements are prevented. Keiper self-guiding PU track timing belts are available as endlessly welded belts and cut goods, in almost any length and width. Properties and special features: Prevent axial movements V-profile guides can be combined with any tooth profile in all sizes Flanges are no longer required, the notched design of the V-profile guide gives rise to high flexibility Applications: Conveying and positioning applications with large center distances Applications, in which axial movement is a problem and flanges cannot be used.

Neoprene endless molded timing belts (form belts)  XL

Neoprene endless molded timing belts (form belts)  HTD 8M / 14M / 20M

Endless extruded round belts Our endless extruded round belts are ideal for low power requirements. They are elastic power transmission elements that do not need cost-intensive tensioning devices. In view of the special production process, they do not have any welding seams or terminal connections and run very smoothly. Moreover, they allow a minimum pulley diameter starting from 5.5 x belt diameter. Our types E80, V75, C70 and P82 are made of specially selected and dynamically tough materials. In addition, type E80 also is antistatic to a limited extent and has a resistance value of about 106 Ohm; thus, it is excellent for use in electronic devices and chip production. Available diameters: 1.8mm - 7mm Available lengths: 40mm – 1,610mm Temperature resistance: -20°C - +160°C Coefficient of friction: 0.35µ - 0.9µ* Maximum tension: >100N

Overview to the technical datas of KEIPER conveyor belt product range RAPID

PU conveyor belt 1-ply white

PU conveyor belt 2-ply light blue

Cleats with heights from 20 mm to up to 280 mm Corrugated Sidewall Conveyor Belts for Inclined Transport of Bulk Materials We produce cleats in 4 different designs: T, C or TC cleats as well as multi-part cleats. Our germanWell® cleats for corrugated sidewall conveyor belts are available in standard quality and in oil or grease resistant quality and with or without biased fabric. Please see our product brochure for more details on weights, dimensions and qualities.