Produktai skirti diržas (354)

FTW Scharnierbandförderer für Stanzautomaten, Pressen, Druckgusszellen, Schneidautomaten u. v. w. Anlagen für schwere, scharfkantige oder heiße Werkstücke in vielen Abmessungen

02.2011.01 - Kleine Riemenkrampe - verzinkt

Super Screw connectors are available in different versions of textile reinforced rubber abrasion resistant, heat resistant, oil and grease resistant, white FDA, self extinguishing, with textile on the running surface or in stainless steel. Screws are available in either galvanised or stainless steel. Super Screw connectors are inserted in the belt diagonally and from both sides. After the rubber layer is removed, the connector is installed using just a cordless screwdriver or, in underground mining, using a breast drill or pneumatic screwdriver. Super Screw® connectors are pre installed, depending on the belt width, in lengths up to 3,000 mm or in rolls up to 25,000 mm long. A variety of screws is also available for the initial installation of the connectors or as spare parts, plus various cordless screwdrivers, a pneumatic screwdriver, brace, PZ 2 or PZ 3 cross head bits and a magnetic bit holder.

Zur dosierten Steilförderung kommen im industriellen Bereich Bunkerförderer zum Einsatz. Das Fördergut wird vom Bunkerförderband auf die erforderliche Höhe zur Übergabe in vorhandene Zuführ- und Sortiermaschinen transportiert. Typische Anwendungen für Bunkerförderer ist z.B. der Transport von Pellets, Kapseln, Hülsen und Verschlusskappen. Die Experten der sfb Fördertechnik konfigurieren die Förderbänder gemäß den Anforderungen des Kunden, um den betriebsinternen Materialfluss optimal zu gestalten. Der Trichter ist standardmäßig aus Edelstahl, jedoch können Sonderausführungen nach Absprache gefertigt werden. Typisch für sfb Fördertechnik sind die zahlreichen Individualisierungsmöglichkeiten wie Gurt- und Stollentyp oder kundenspezifische Sonderausführungen. So kann z.B. über eine Niveaumessung am Trichter das Bunkerförderband ein- und ausgeschaltet werden. Des Weiteren sind für die Bunkerförderbänder Auslaufrutschen oder Abdeckungen mit Griffen und Sicherheitsschalter lieferbar.

The heat resistant wiper has been specially developed for hot goods and high ambient temperatures, as this wiper is absolutely heat resistant up to 270 degrees. Suitable for drying drums (e.g. in asphalt mixing plants and lime plants).

Bechtel also delivers the belt fasteners for installing your elevator belt. Available in different kinds of fasteners (normal, speedy or belt clamps) for all kinds of elevator belting. Model A&B Model Speedy Model 1,2,3

The heated scraper from FTK Förderband Technik Kilian GmbH is equipped with a heater and thermal oil, which prevents the material from freezing on the scraper, both the lower belt and the drum scraper. The heated scraper is particularly suitable for the cold season and at high minus temperatures.

Knocker rolls are used on the cleat belt in order to knock off adhering material. The Knocker roll is fitted in the inner belt near the drive pulley. Area of use cleat belts and badly damaged belts Knocker rolls are used when it is not possible to use conveyor cleaning brushes. They can also be used as combination together with a conveyor cleaning brush. Area of use:cleat belts and badly damaged belts

For the special requirements of your belt conveyor system, we manufacture for you drive pulleys, carrying idlers, throbbing drums, lift pulleys with or without internally located cone. With diameters up to max. 1,000 mm and lengths up to max. 4,500 mm, these are suitable for all types of belt conveyor system. All pulleys are turned cylindrically or spherically. The axle connections can be delivered in alternative designs with internal bearings, welded, with wedged connections or with clamping set shaft connections. Special designs such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be delivered upon request.

Continuous blasting – Excellent, highly automated processing The selected blasting medium is directed towards your workpieces at high speed using blast wheels. This ensures high blasting performance and optimum use of energy. Using this technology in a continuous process offers several advantages over batch processing: — Continuous workpiece feeding — Easy to integrate into production processes — Simplified parts flow That is why our continuous belt blasting units are frequently used to replace conventional batch systems. With their easy workpiece handling and excellent blasting results, they are even used as replacements for suspended-line systems. Type:troughed belt Applications:for metal,for bulk parts Other characteristics:continuous, conveyor

Metal connectors with self tapping screws are provided for the fast connection of rubber belts using a cordless screwdriver. FTK connectors are also available for round balers and in a special version for grape harvesting machines. Our steel connectors come in galvanised steel or non magnetic stainless steel. FTK connectors can be installed just using a cordless screwdriver because the screws are self tapping. No hole drilling is needed. FTK connectors are available with screws and connecting cables in lengths up to 3,000 mm, depending on belt width. A variety of connecting rods, lock washers and screws is also available for the initial installation of FTK connectors or as spare parts, plus various cordless screwdrivers, a pneumatic screwdriver, brace, PZ 2 cross head bits and a magnetic bit holder.

The drum plastic scraper is for use on light to heavy conveyor belt systems. High quality PU segments for particularly high time of exposure also suitable on spherically rotated drums high flexibility due to PU segments also specially suitable for reversing conveyors belt speeds up to 5 m/s especially for badly damaged belts and PVC belts well suited for use in narrow space conditions limiting damage to the belt longer life expectancy and therefore significant cost savings due to new type of segment shape elastic segments with permanently consistent contact pressure with compression springs (for the automatic regulation of the contact pressure) Areas of use:sand plants, gravel plants, clay plants, brick plants, asphalt-mixing plants and in the gypsum

de 330 - 3.937 mm La

FTK primary scrapers for pollution abatement in conveyor belt systems The primary scraper is used for light to heavy conveyor belt systems high tech hard metal for particularly high time of exposure also suitable on spherically rotated drums high flexibility due to PU hard metal segments also specially suitable for reversing conveyors belt speeds up to 5 m/s specially for extremely adherent materials or in difficult or narrow space conditions significantly improved cleaning performance limiting damage to the belt longer life expectancy and therefore significant cost savings due to special segment shape elastic segments with permanently consistent contact pressure with compression springs (for the automatic regulation of the contact pressure) Areas of use sand plants, gravel plants, clay plants, brick plants, asphalt mixing plants and in the gypsum, cement and glass industries etc Any products adhering to the belt reduce the life expectancy of the conveyor due to the heavy soiling. Areas of use:sand plants, gravel plants, clay plants, brick plants, asphalt-mixing plants and in the gypsum

Beim Kunststoffgliederkettenförderer handelt es sich um ein Förderband, bei dem das zu transportierende Gut auf einer Gliederkette (Modulband) getragen wird. Diese Fördertechnik wird in der Regel für den Transport von Stückgütern eingesetzt und zeichnet sich durch eine hohe Flexibilität aus. So können nicht nur horizontale, sondern auch vertikale und kurvige Transportstrecken bewältigt werden. Dank der beeindruckenden Variabilität lässt sich die Fördertechnik branchenübergreifend in den verschiedensten Bereichen einsetzen. Die Fördertechnik basiert beim Gliederkettenförderer im Wesentlichen auf kontinuierlich oder geregelt angetriebenen Gliederketten, welche aus Kunststoff hergestellt werden. Diese robust, einfach zu reinigen und zwei- oder dreidimensional beweglich. Auf diese Weise kann das Förderband ohne Unterbrechungen Kurven oder Steigungen bewältigen. Die Modulbandoberfläche kann vollständig geschlossen oder in verschiedenen Variationen durchlässig sein.

Optimale Bearbeitung mit hohem Automatisierungsgrad Strahltechnik bei Walther Trowal bedeutet Strahlen im Durchlauf seit über 20 Jahren und mehr als 85 Jahren Erfahrung in der Oberflächentechnik. Mithilfe von Schleuderrädern wird das gewählte Strahlmittel in hoher Geschwindigkeit auf Ihre Werkstücke gelenkt – und sorgt für hohe Strahlleistungen und eine optimale Energieausnutzung. Dabei bietet der Durchlaufbetrieb gegenüber dem Chargenbetrieb einige Vorteile: — kontinuierliche Werkstückbeschickung — einfache Integration in Fertigungsabläufe — erleichterter Teilefluss Deshalb ersetzen unsere Muldenband-Durchlaufstrahlanlagen häufig konventionelle Chargenanlagen. Und auch als Ersatz für Hängebahnanlagen kommen sie zum Einsatz – denn sie überzeugen durch einfaches Werkstückhandling und ein ideales Strahlergebnis. Typ:Muldenband Anwendungsbereiche:für Metall, für Schüttgut, Weitere Eigenschaften:kontinuierliche Bearbeitung, kontinuierlicher Durchlauf

The FTK curved scraper is for use on light to heavy conveyor belt systems. The curved solid carbide bar of Curved standard stripper has particularly in the center of the conveyor belt a high wiping effect and relieves the pressure on the outer edges. belt speeds up to 2 m/s with the mini model. belt speeds from 2 m/s upwards with the reinforced model. specially for use with extremely adhering and abrasive materials and damaged belts and having only a minimal installation height. Areas of use various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt mixing plants and in the gypsum, cement and glass industries etc. Any products adhering to the belt reduce the life expectancy of the conveyor due to the heavy soiling The consequences are usually expensive maintenance measures and production down times. The FTK Förderband Technik Kilian belt conveyor scrapers represent a cost effective development in the field of belt cleaning. Areas of use:various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt-mixing plants

The FTK Förderband Technik Kilian GmbH quick cleaning scraper is a special device to remove the scraper, whether drum scraper or lower belt scraper, from the conveyor belt as quickly as possible and to clean adhering materials. Tools are no longer required. Can be used, for example, in the area of ​​film and paper recycling. Can be carried out by untrained personnel in just a few steps and without tools.

Das Überbrücken von Höhenunterschieden und der Transport von Stückgüter gehört oftmals zu den Anforderungen in der Fördertechnik. Je nach Fördergut und Transportstrecke kommen unterschiedliche Lösungsansätze zum Einsatz. Winkelförderer in verschiedenen Variationen Durch den modularen Aufbau des Förderbands eignet sich der Winkelförderer hervorragend zur Integration in bestehende Maschinen oder als bewegliche Transporteinheit z.B. zur Befüllung von Containern. Das Winkelförderband oder das Z-Förderband kann in der Gurtvariante mit Stollen und Wellenkanten ausgestattet werden und somit den Materialfluss optimieren. Abhängig vom Fördergut eignen sich Winkelförderer mit Scharnierketten oder Kunststoffgliederketten, für die ebenso eine Vielzahl an Zubehör zur Verfügung steht.

reasonably priced alternative for the cleaning of belt conveyors in the lower belt can be used twice by simply turning the bar round end to end PU turning bar also specifically for PVC and other types of plastic belts

The FTK HM inner belt scraper is for use on light to heavy conveyor belt systems. High tech hard metal enables a particularly high time of exposure. The HM inner belt scraper prevents the material from settling in the inner belt between the belt and the drum and so damaging the drum. Belt speeds of up to 2 m/s with the mini model. Belt speeds from 2 m/s with the reinforced model. specially for use with extremely adhering and abrasive materials and damaged belts and having only a minimal installation height. Areas of use various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt mixing plants and in the gypsum, cement and glass industries etc. Any products adhering to the belt reduce the life expectancy of the conveyor due to the heavy soiling. The consequences are usually expensive maintenance measures and production down times. Areas of use:various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt-mixing plants

FTK Förderband Technik Kilian GmbH T bar scrapers are made of highly wear resistant polyurethane and are ideal for demanding applications in bulk, recycling and treatment technology. When the T bar scraper becomes worn, it can be turned simply and easily and can be reused several times over. A cost effective alternative to cleaning the return belt of conveyor belts Can be used three times by simply turning the PU T bar scraper end to end PU T bar especially for PVC and other types of plastic belts Areas of application:sand, gravel, clay, brick plants, asphalt mixing plants, plaster, cement, glass industry

Pull cords are used as actuators for operating pull rope emergency stop switches along conveyor belt systems. The pull cord and the accessories required for installation are functionally matched to the pull rope emergency stop switch, taking normative requirements into account. We therefore constantly carry out Pull cord, steel cable, 3mm or 5mm red PVC sheathed Various types of tension springs Anchor hook M10 Anchor hook M12 Anchor hook M8 Turnbuckle M6; 2 eyelets Turnbuckle M6; 1 hook / 1 eye Chain link 6 Eye bolt M12x60 * Eye bolt M12x200 * Eye bolt M12x60 * Clamp bracket, size. 3 5 Clamp egg shaped, size. 3 Clamp egg shaped, size. 5 Thimble Gr. 3 Thimble Gr. 5 Marking plate for rip cord Deflection pulley M10x60, pulley And much more

The FTK master cleaner scraper is for use on light to heavy conveyor belt systems. belt speeds up to 2 m/s with the mini model. belt speeds from 2 m/s upwards with the reinforced model. specially for use with extremely adhering and abrasive materials and damaged belts and having only a minimal installation height. Areas of use various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt mixing plants and in the gypsum, cement and glass industries etc. Any products adhering to the belt reduce the life expectancy of the conveyor due to the heavy soiling. The consequences are usually expensive maintenance measures and production down times. The FTK Förderband Technik Kilian belt conveyor scrapers represent a cost effective development in the field of belt cleaning. Due to the flexible mounting arrangements and the gentle but thorough cleaning, the FTK Förderband Technik Kilian belt conveyor scrapers lead Areas of use:various plants, e.g. for sand, gravel, recycling, compost, clay, brick, asphalt-mixing plants