Produktai skirti diržas (1493)

PVC conveyor belt 2-ply black mat

PU conveyor belt 1-ply white

PU V-belts run individually or alongside one another and convey products on slightly ascending or descending conveying systems without allowing the products being transported, e.g. boxes, tiles, glass slabs, cardboard articles etc., to slip. In addition, PU V-belts are used for driving live roller conveyors. Standard stock program: 75° Sh.A red 80° Sh.A transparent, FDA 80° Sh.A sky-blue, FDA 85° Sh.A green 90° Sh.A white Profiles 6x4 / 8x5 / 10x6 / 13x8 / 17x11 / 22x14 Smooth or notched

The KEIPER belt series RAPID conveyor and process belts is available in polyester, cotton or blended fabrics, with special coatings such as neoprene, silicone, non-woven fabric and many more, in a wide range of colors suitable for the specific application, and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Neoprene timing belts are manufactured in a sophisticated process with state-of-the-art production engineering. They are made of chloroprene with glass-fiber cords and protective fabrics on the carrying surface.The high-performance timing belts of the Premium Series were especially developed for heavy-duty and high-speed power transmission tasks. Improved materials and an optimized combination of materials provide even more performance.Profiles: MXL, XL, L, H, XH, XXH DXL, DL, DH 2M, 3M, 5M, 8M, 14M, 20M D5M, D8M, D14M 3MP, 5MP, 8MP, 14MP (Premium Series) S3M, S5M, S8M, S14M, DS8M Properties: Form-fit, synchronous running Longitudinal stability, negligible elongation Low noise and resistant to abrasion Maintenance-free Positional accuracy, isogonic Flexural fatigue strength High belt speed

The Keiper UNITRANS conveyor belt series can be fitted with numerous different entraining elements and tracking guides. Entraining elements are used for ascending or descending conveyor systems, linear movements and when lateral forces occur. With these elements it is easier to carry along, transport and place the products to be conveyed. Tracking guides are used to ensure directionally correct and stable guiding of the belt on the conveying system and to prevent the conveyor belt from running off. Conveyor belt entraining element or tracking guides made of PVC and PU in blue, white, green, petrol or transparent. V-shape, rectangular or block tracking guides. Smooth or notched design. Depending on the design, oil and grease resistant, with FDA/EU approval.

Keiper self-guiding PU track timing belts are made of abrasion-resistant polyurethane and high-strength steel cords or aramid cords and produced in open lengths. The V-guide is either integrated in the timing belt during production or welded into the belt later. These timing belts exhibit the same properties as standard timing belts. In addition, axial movements are prevented. Keiper self-guiding PU track timing belts are available as endlessly welded belts and cut goods, in almost any length and width. Properties and special features: Prevent axial movements V-profile guides can be combined with any tooth profile in all sizes Flanges are no longer required, the notched design of the V-profile guide gives rise to high flexibility Applications: Conveying and positioning applications with large center distances Applications, in which axial movement is a problem and flanges cannot be used.

Neoprene endless molded timing belts (form belts)  XL

Neoprene endless molded timing belts (form belts)  HTD 8M / 14M / 20M

Endless extruded round belts Our endless extruded round belts are ideal for low power requirements. They are elastic power transmission elements that do not need cost-intensive tensioning devices. In view of the special production process, they do not have any welding seams or terminal connections and run very smoothly. Moreover, they allow a minimum pulley diameter starting from 5.5 x belt diameter. Our types E80, V75, C70 and P82 are made of specially selected and dynamically tough materials. In addition, type E80 also is antistatic to a limited extent and has a resistance value of about 106 Ohm; thus, it is excellent for use in electronic devices and chip production. Available diameters: 1.8mm - 7mm Available lengths: 40mm – 1,610mm Temperature resistance: -20°C - +160°C Coefficient of friction: 0.35µ - 0.9µ* Maximum tension: >100N

Overview to the technical datas of KEIPER conveyor belt product range RAPID

PU conveyor belt 1-ply white

PU conveyor belt 2-ply light blue

germanGrip® Cera basic with CN Layer Specifications: Detailed profile: 20 x 20 x 4 mm Base-Rubber Characteristics: Density: 1.13 ±0.03 g/cm³ Hardness: 60 ±5 ° Shore A Tensile strength: ≥ 400 % Abrasion: ≤ 130 mm³ Available dimensions: Thickness: 12 mm Width: 385 mm Available length: 10 m Downloads: Technical Data Sheet germanGrip® Cera basic with CN Layer - English [PDF]

PVC conveyor belt 2-ply black, structure Gittergrip

PVC conveyor belt 2-ply light blue

PVC conveyor belt 2-ply light blue, structure

We use many different welding methods to produce endlessly spliced conveyor and process belts, always depending on the material and intended application. The endless splice punched finger splice stepped finger splice multilayered stepped splice conical splice The mechanical fastener Steelgrip fasteners, stainless steel Wire hooks, steel or stainless steel Polyester zip splice Self-lock fastener, stainless steel Plastic splice Nieka fastener Bonded wire hooks PVC/PU Minet fasteners

Keiper’s series of UNITRANS conveyor and process belts is available in 1-/ 2- or 3-layered polyester fabrics, with a PVC coating or PVC interlayer, and in a variety of colors depending on the application and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approval and compliance with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

PVC conveyor belt 2-ply white, structure Längsrille

PVC conveyor belt 2-ply light blue, structure Längsrille

Synchronising pulley AT-Profil metric pitch AT10

Synchronising pulley AT-Profil metric pitch AT20

KEIPER synchronising pulleys catalog

Synchronising pulley HTD-Profil metric pitch HTD14 for cylindrical bore

Synchronising pulley H-Profil imperial pitch H for cylindrical bore

Synchronising pulley HTD-Profil metric pitch HTD5 for cylindrical bore

Synchronising pulley HTD-Profil metric pitch HTD8 for cylindrical bore

Synchronising pulley HTD-Profil metric pitch HTD3 for cylindrical bore

KEIPER synchronizing toothed shafts can be made of such diff erent materials as aluminum, steel or stainless steel. The fact that they can be produced with all pitches and designed according to your specifications and drawing ensures optimal solutions for all applications and any loads. Our synchronizing toothed shafts work together optimally with our extensive and complete range of timing belts. Together they are a perfectly matched system for your application. We have a large range of standard pulleys on stock, which can be reworked according to your specifi cations within a short time (e.g. bores and machining based on your drawings). Special surface coatings, e.g. such as hard coating, anodizing, zinc coating or bronzing, improve corrosion and wear resistance.