Grout 6 SFR: Liejamas struktūrinis, armuotas, kontroliuojamo susitraukimo šaudomas betonas
Grout 6 SFR
Grout 6 SFR is a high-performance, self-levelling castable mortar, reinforced with Readymesh MM-150 steel fibres and 6 mm Readymesh PM-060 polypropylene microfibres. It boasts high flexural strength, excellent adhesion to concrete and steel, and shrinkage compensation. The aggregates have a maximum size of 6 mm. It is ideal for anchoring road joints, restorations, reinforcements, and seismic adjustments, providing ductility for medium-to-high thicknesses (5–20 cm) on structures made of reinforced concrete and masonry.
Structural restoration and adjustments, recovery and anchoring of road, motorway, airport joints, and critical area joints in general.
Application surfaces should be clean, free of dirt, crumbling and non-adhering parts, dust, etc., and adequately saturated with water until they reach the condition "saturated with dry surface". Proper roughening of the surfaces through scarifying, sandblasting, etc., is always necessary to achieve maximum adhesion values to the substrate. Optimal values are obtained with high-pressure hydro-scarification. Remove any exposed rebar that is undergoing disruptive oxidation or is deeply oxidized, cleaning the rust from the exposed rebar (by sandblasting or using abrasive brushes).
Pour about 2/3 of the mixing water into the mixer, add Grout 6 SFR and the remaining water; continue mixing until a homogeneous, lump-free mixture is achieved. The mixing water should be about 13%-15% by weight (3.5-4.5 litres per bag). Use casting procedures that ensure the absence of discontinuities and avoid the formation of air pockets.
For high anchoring sections, it is advisable to add Ghiaietto 6.10 (please refer to the appropriate technical data sheet for more information).
Packaging: 25 kg bag
Unit of Measure: €/kg