Produktai skirti cc150s fo 2v 2c (5)

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q4 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 1 kHz. The pulse energy is 2.5 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups. Wavelength:213 nm Pulse energy:2.5 µJ Peakpower:2.5 kW Pulse Width:1 ns Average Power:2.5 mW Repetition Rate:1 kHz Beam diameter:< 0.45 mm Spatial Mode:TEM00 Application:Holography, engraving, photo acoustics, LIBS, mass spectroscopy, photo luminescence

The teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. All standard units are equipped with an energy efficient constant heating control. Depending on the product version a flow rate measurement and control, whose actual value is indicated simultaneously with the actual and nominal values on the colour screen, is installed as standard or is optionally available. Temperature profiles are graphically indicated after selection of the corresponding menu function. On the start page useful functions like limit value monitoring, leak stop operation etc. can be selected. The proven teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. The 95°C series was extended by three versions with higher capacities. The models are designed for larger consumers; they have heating capacities from 18 to 36 kW, cooling capacities from 50 to 120 kW and pump flow rates from 110 to 170 l/min. Display:with touchscreen Type:circulating water Use:cooling,heating,for injection molding machines,process

24VDC / 5VDC 10A

Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-4622 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring low shear stress. It dispenses at a high precision the lowest volumes in microliter range. Due to its compact design small dimensions have been achieved. The pump is suitable for dosage of low viscosity liquids such as deionized water, watery solutions, methanol, solvents, oil and lubricants. Advantages Compact dimensions diameter 18 mm, length 88 mm Small dosage volumes, high flow rates smallest volume 2 µl – flow up to 72 ml/min High dosage precision precision CV 1 % at low volumes Long service life wear-resistant tungsten carbide Low pulsation delivery, low shear stress rotary micro annular gear technology Applications Analytical instrumentation Fuel cells Laboratory automation In vitro diagnostics Flow rate:1.2 - 72 (min. 0.012*)ml/min Smallest dosage volume:2µl Displacement volume:12µl Differential pressure range:0 - 5 bar (73 psi) Maximum inlet pressure:1 bar (15 psi) Liquid temperature range:-20 ... +60 °C (-4 ... +140 °F) Viscosity range:0.3 – 100 (max. 1,000*)mPas Precision CV:1% (Coefficient of variation CV) Velocity range:100 – 6,000 (min. 1*)rpm Fluid connection:manifold assembly Wetted parts:alloy C22 (2.4602) instead of stainless steel, ceramics instead of tungsten carbide; shaft seal: gra Motor:DC-motor with graphite brushes, assigned power rating 4.5 W, nominal voltage 24 V, digital magnet en Electrical connection:10-pole connector Dimensions (L x W x H):Ø 18 mm, length 88 mm Weight:approx. 100g Remarks:* depending on accessories, Customized solutions on request

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q1 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 20 kHz. The pulse energy is 0.05 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups. Wavelength:213 nm Pulse energy:0.05 µJ Peakpower:0.05 kW Pulse Width:1 ns Average Power:0.75 mW Repetition Rate:20 kHz Beam diameter:< 0.4 mm Spatial Mode:TEM00 Application:Holography, engraving, photo acoustics, LIBS, mass spectroscopy, photo luminescence