Produktai skirti arba (58)

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

These winches are used for both hoisting and pulling of loads. They are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven spur gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings....

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...

Magnets for recycling separate ferrous and non ferrous metals from waste streams or bulk streams. For the elimination of impurities from raw materials or recovery of valuable metals from product streams. An overband magnet effectively and quickly separates high volumes of iron or steel and hangs above a flat or trough-shaped conveyor belt. This type of magnet is self-cleaning and continuously draws Ferro parts from a material flow. he iron removal efficiency of overband magnets ranges from 70 to 90%. This depends on magnet design, product flow and placement. We also manufacture Eddy current separators which remove non-ferrous metal particles, such as copper and aluminium, in a continuous process. For the recovery, recycling or removal of metals.

ur automatischen Aufnahme, Platzierung oder Positionierung von Stahlobjekten mit begrenztem Gewicht. Alle Handling-Magnete können ein- und ausgeschaltet werden und verfügen über eine Gewindebohrung zur Befestigung an einem Roboter. Dies ist eine effiziente Alternative zu einem herkömmlichen Robotergreifer. Anwendung: im Bereich Blechhandling für die Prozessautomatisierung, in automatischen Produktionsanlagen sowie für Pick-and-Place-Robot

Befestigungsmagnete sind einzigartige Systeme zum Aufhängen, Verbinden, Halten, Positionieren oder Befestigen von Produkten. Sie können auch als Wandmagnete oder Deckenmagnete verwendet werden.

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

These winches are used for both hoisting and pulling of loads. They are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven spur gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings....

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

Les plots et crochets magnétiques sont des systèmes magnétiques compacts avec une seule surface d’attraction. Ils ont une gaine en acier, en laiton, en acier inoxydable ou en plastique. La gaine en acier empêche la dispersion du champ magnétique et augmente la force magnétique de la surface d’attraction. La gaine, ou le pot, offre également une meilleure résistance à la corrosion et aux produits chimiques. La température de fonctionnement maximale varie de 60 à 450 °C. Nous fournissons des pots magnétiques en néodyme, en samarium-cobalt, en AlNiCo et en ferrite. Consultez notre gamme ci-dessous.

Les aimants de manutention conviennent à la prise, à la pose ou au positionnement automatisé d'objets ferromagnétiques en fer, acier ou autres d'un poids limité. Tous les types d’aimants de manutention peuvent être activés et désactivés et sont dotés d'une interface à trou fileté pour fixation à un robot. Ceci fait qu’ils sont souvent une alternative efficace pour les pinces de robots traditionnelles. Application : l’automatisation de processus pour la manipulation de tôle dans les lignes de production automatisées, les robots et les systèmes pick-and-place. Exemples : récupérer des tôles dans des presses ; positionner des axes dans une ligne de production ; extraire un par un (désempilage) des produits des caisses ; assembler de composants en acier ; souder avec des robots de soudure.

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

These loose sheets of stone paper are a nice addition to your current MOYU collection, or ideal for trying out stone paper for the first time. Available in blank and lines version.

Red cabbage, after the core has been removed, you can choose to have the cabbage halved or quartered. Like this, you can immediately use the cabbage for further preparations, such as raw vegetable salads. Content:15 kg. Packaging:EPS-H Source:NL

Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches TL = spur gear winches Version coding: D = cable drum for 1 cable 2D = cable drum for 2 cables GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

Les séparateurs à courant de Foucault, ou séparateurs non-ferreux, séparent les métaux non magnétiques (non ferreux). Ils purifient des flux importants de vrac et/ou séparent des métaux non-ferreux pour la réutilisation. Les séparateurs à courant de Foucault connaissent de nombreuses applications. Ils peuvent traiter de grandes quantités parce que le convoyeur à bande sépare et évacue automatiquement et en continu les métaux non-ferreux. Pour une bonne séparation il est important que le matériau soit acheminé de manière égale, à l'aide d'une goulotte vibrante ou d'un convoyeur à bande, par exemple. Ainsi, le produit est répartie de façon uniforme sur la bande, formant une monocouche : cela signifie que l'épaisseur de couche acheminée est à peu près aussi épaisse que la plus grosse particule, et qu'il n'y a donc pas de particules se trouvant l'une sur l'autre. Ceci est particulièrement important avec les petites tailles de fractions.

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

These winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The worm gear winches are equipped with a load pressure brake. This brake holds the load at...

These loose sheets of stone paper are a nice addition to your current MOYU collection, or ideal for trying out stone paper for the first time. Available in blank and lines version.

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two...

KEY FEATURES Robust and lightweight aluminium structure Top quality fabric materials All weatherproof Fully closable (sidewalls) Multiple anchoring options Fits on Layher stages TÜV certified Fast and easy installation Customizable Digitally printable cover Endless connectable Multiple mounting options up to 100 kg All weather proof -30 to +70

Every owner likes to give his or her pet something special, a treat. Whether this is on a daily basis or only every once in a while, it should be as tasty as possible, every single time. And when we are into it anyway, this delicious snack better have a nice shape, and be healthy and natural as well. A variety of tasty, yet healthy base raw materials, such as fruit or vegetable pulps, alfalfa or grass hay, complimented with real fruit or vegetable chunks, herbs or other tastemakers, make a mean snack for all animal species. Pick one or more of our standard snacks, or come up with a desired recipe of your own, we will make it into a guaranteed success. Contact us to see what we can do!

The new generation of temperature logger is on the market: the Emerson TXi Labels Temperature Loggers. The Emerson TXi Labels temperature recorder uses the latest and innovative temperature sensor. This sensor ensures that the sensor does not need to be calibrated, thus maintaining accuracy ARTICLE CODE:4003 SKU:TC06D-PAK00 Lengte:57mm Breedte:45mm Hoogte:2mm Gewicht:4 gram Measuring range temperature:-30C - +40C

Pot magnets and magnetic hooks are compact magnet systems with a single attracting surface. They have a steel, brass, stainless steel or plastic shell. The steel shell prevents dispersion of the magnetic field and increases the magnetic force of the attracting surface. The shell - or pot - also provides better corrosion and chemical resistance. The maximum operating temperature ranges from 60 to 450 °C. We supply pot magnets made of neodymium, samarium cobalt, AlNiCo and ferrite