Produktai skirti arba (9)

Industrial mezzanines are self-supporting steel structures consisting of columns, main beams and secondary beams. The best solution to multiply the internal space of your warehouse, they are perfect for archiving or storing materials and any type of finished product or merchandise. Metalcoop industrial mezzanines are made to a customized design for each customer and for each project a specific structural calculation is made that takes into account the load capacity requested by the customer and any other needs (manoeuvring space, characteristics of the room, intended use), adjusting the lengths of the beams, the height and the position of the columns. All connections are bolted and no welding is required on site, therefore the structures are completely removable and repositionable. The basic components of Metalcoop industrial mezzanines are: • Main and secondary beams made with cold formed C240x56x15x4 profiles in S355JR (EN10025) steel. • Columns made with cold formed and welded tubulars 120×120 in S275JR steel. • Vertical X-bracing made with S235JR steel plates (EN10025). • Walkway consisting of an 80 mm corrugated sheet metal + Easy HR25 LUXE bi-laminated chipboard. • Handrail made up of 50×50 small columns. • Handrail and full rising purlins made of chromed steel bars. Optional components of Metalcoop industrial mezzanines: STAIRS Metalcoop is able to produce tailor-made staircases according to the customer's needs, in respect of the safety standards in force which provide for the maximum rise between the steps not exceeding 200 mm, the useful tread never less than 250 mm net in order to avoid ramps with more than 15 steps. CUSTOM-MADE GATES Metalcoop also designs custom-made overturning safety gates or with simple sliding openings.

Non-stop equalizing used right after ramose, decatizing or other textile finishing machines for perfectly rolling with no tension. All machines has 2 processing zones: one divergent (conical =1mt) where fabric is raised to the desired width; the other parallel=0.5mt, where fabric is stabilized and rolled. Optional can be added 2 vaporizing trays to eliminate creases.

Il crudo Toscano, di forma insolitamente tondeggiante e di colore rosso vivo, si caratterizza per un processo di stagionatura davvero unico e per i fattori ambientali in cui viene lavorato che concorrono a conferire alla carne l'inconfondibile sapore delicato, sapido, fragrante.

Salsa di cinghiale non contiene glutammati aromatizzanti conservanti o coloranti.

Il servizio di stampa personalizzata e rilegatura di Elettra, consente di creare documenti stampati su misura, come libri, riviste, brochure o cataloghi, e di scegliere opzioni di rilegatura personalizzate. Stampa e Rilegatura Cataloghi Personalizzati con Rilegatura in Brossura o Rilegatura a Punto Metallico. La scelta di un'opzione di rilegatura rispetto ad un'altra per i vostri cataloghi personalizzati dipende dal numero delle pagine del catalogo stesso. Per cataloghi con poche pagine, la rilegatura a punto metallico o a spirale è ideale. Le pagine si apriranno completamente per una facile lettura. Per cataloghi più voluminosi, la brossura fresata è la scelta migliore. Offriamo stampa di alta qualità a prezzi convenienti per i tuoi cataloghi online!

Our solutions are fully customizable in terms of casing and cabling to be flexible and exploitable for different gas turbine ranges, from 2MW up to 90MW power ratings. There are 4 exciter configurations: HD high duty PN 401560.01 DC double capacitive PN 401335.11 INDUCTIVE PN 400671.02 SC single capacitive KV 15kVac

GUSTI DISPONIBILI: ?Arancia Bionda, Arancia Sanguinello, Lemon Lime, Cola, Cola senza caffeina, Cola Lime, Tonica, Tropical Fruits, Limonata di Sorrento, Melograno, Energy Drink, Blue Moon Super Energy Drink, Mela verde, Frutti di bosco, Pompelmo rosa, Tè Limone, Tè Pesca, Tè Verde, Tè Nero, ACE Multivitaminco, Mojito cocktail (analcolico), Margarita cocktail (analcolico). I succhi concentrati della linea "Breakfast Professional" vengono prodotti con un alto contenuto di succo e polpa di frutta. Si utilizzano principalmente per: Hotellerie nelle colazioni, catering, bevande gassate, bevande analcoliche, long drink, bevande alla frutta, ecc. Questi sciroppi concentrati sono molto facili da usare: - a mano basta aggiungere acqua liscia o frizzante alla polpa concentrata, mescolare e servire in un bicchiere o caraffa. - Con macchine post-mix alla spina per un servizio più rapido o self services.

ST30 Antares system for ledged shelves Antares ST30 is a system designed by Metalcoop for racking with shelves that consists of two Antares uprights with plastic or galvanized steel support feet and a number of cross-braces according to the height of the frame. It is an ideal solution for archiving or storing light and medium loads handled manually, which offers robustness and maximum adaptability to warehouse areas. The Antares ST30 system can also be used for multilevel systems. The standard heights of the Antares system are 1000, 1500, 2000, 2250, 2500, 2750 mm, and from 3000 to 5500 mm every 250 mm. The standard depths are 300, 350, 400, 500, 600 mm. Antares ST30 system components: • UPRIGHT: it has a rectangular, 30x45mm closed-section shape, seamed and stiffened to achieve a considerable resistance to torsion as well as flexion and compression loads. • CROSS-BRACE: interlocking with the two uprights of the frame, it is built out of a U profile with hooks at the ends. • PLASTIC FOOT AND STEEL FOOT: the first one is installed as a standard element while the second one is used for higher load capacities. • ANTARES HOOK: specially designed to allow easy insertion into the frames ensuring the load capacity of the shelf and contributing to the stability of the shelving itself. • VEGA SHELF: it is obtained by press forming a single, polished DC01 steel sheet with 0.5 mm thickness for shelves with depths 300, 350 and 400 mm, and 0.6 mm thickness for shelves 500, 600, 700 and 800 mm deep. These shelves are boltless, i.e. they are assembled completely interlocking without screws. • SPINE BRACING: it is of fundamental importance for the longitudinal stability of the shelving. The bracing is built of steel wires, each with its own tension screw to adjust the pull, secured to the uprights by suitable steel plates. • BACK-TO-BACK TIE: it is an important device affecting structure stability. It is made of two flanged plates built of zinc-coated steel plate 1.5 mm thick. The ST30 ANTARES SYSTEM FOR LEDGED SHELVES also has the following qualifying accessories: • Side panel for container • Metalcoop multifunction drawers • Doors with swinging doors and key lock • Sliding ladder • Hanging ladder and 4-wheel ladder

BV1 sales counters and BL2 work tables Metalcoop is also the perfect partner for the design and construction of sales counters and working or support tables. Metalcoop counters give a professional appearance to resale and they are perfect for those who need large sizes too, thanks to an elegant style and maximum modularity. Metalcoop BV1 counters are completely modular, with a very solid steel sheet structure and they are available in pre-engineered, fully accessorized modules. Besides that, a wide range of accessories are available such as shelves, drawers of different sizes and even more, thanks also to complete compatibility with ST30 accessories. Metalcoop BV1 sales counters will guarantee you: • Total modularity in order to choose the best layout for your spaces. • Flexibility of use for guaranteeing always the maximum ease of movement for employees and customers. • Great aesthetic impact thanks to many colours available to improve the shopping experience. BL2 work tables and benches If what you are looking for your company is a working table, choose the reliability of the BL2 Metalcoop ones. Equipped with a simple and sturdy metal structure that can be assembled, they are made up of bolted ST60 frames and custom-made beams with interlocking hooks and a rubber or laminate top table. The BL2 worktables or workbenches can be supplied with an additional support surface made by galvanized panels for maximum versatility, which adapt perfectly to your work environments. Besides guaranteeing maximum reliability, they are durable, easy to clean and with ergonomics that always guarantee user-friendly comfort. Finally, both the worktables and workbenches are produced with attention to sustainability by Metalcoop, which is a company with an ethical-social certificate.