Produktai skirti arba (161)

Dieses stationäre Schreib-/Lesegerät ist ein kleiner, handlicher und einfacher USB Desktop RFID Reader für Terminals und Laptops, die mit USB-Schnittstellen ausgestattet sind. Die USB 2.0 Schnittstelle gewährleistet high-speed Datentransfer. Die Besonderheiten des USB Desktop Readers sind das exzellente Design und ein beleuchteter LED-Rahmen, der während des Lesevorgangs leuchtet.

The HSSD - Side Drum Heater is an easy and actual aid to the warming of steel barrels. It has got a higher efficiency than the Insulated Jacket HISD, but no thermal insulating function. For a very quick heating and higher temperatures up to three drum heaters can be used simultaneously for a 200-liter barrel. The Side Drum Heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can of course be made to measure, too. HSSD - Side Drum Heaters are suitable in particular to defrost frozen or other products, thus allowing to empty the barrels rapidly. Soaps, fats, varnishes and oily products can be melted as well, respectively reduced in their viscosity. In addition, the 200-liter element can be used in conjunction with the HBD Base Drum Heater to shorten the heating-up time further. Max. temperature of insulation:120 °C Outer Material:Silicone Insulation Material:none Protection class:II Cable length:2 meters Type of cable:HO7RN-F with Schuko-plug (without ground) Fastening:Tension springs control:Capillary pipe thermostat | optional: digital Thermostat Control range:0 - 120 °C Heating zones:1 Special sizes possible:yes

Der UHF read/write Long Range Controller ist eine perfekte Lösung für alle Anwendungen, bei denen ein zuverlässiges und robustes Erfassungsgerät benötigt wird. Das stationäre Lesegerät identifiziert passive UHF Transponder und ist für Anwendungsbereiche wie Industrie, Supply Chain, Zugangskontrollen etc. geeignet.

Document sleeve with study crease to hang over boxes or other containers. • Document sleeve in A4 landscape format with sturdy fold to hang over cartons, boxes or other containers • Also for insertion between stacked cartons • Coloured rear foil made of durable hard plastic • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A4 landscape / 297 x 210 mm (W x H) • Fold width: 24 mm / overhang: 55 mm • Suitable printable insert labels: Article number 485602 Colour:dark blue Material:plastics Reference:172307

Efficiency through ergonomics: monitor holder for wall and desk Whether for one or several monitors: monitor arms today make an important contribution to an ergonomic workplace. A special feature of DURABLE holders: Smart functions down to the last detail with easy mounting and handling. Variable mountings and height-adjustable monitor holders allow maximum adaptation to individual needs: Thus, the monitor holders for the desk offer different solutions depending on the number of screens and the table mounting. The elegant design of the monitor mounts blends into any working environment and also enhances the workplace. Helpful tips and information for using monitor holders: Quality made in Germany and innovative features: find out more about DURABLE monitor holders. Clean Desk - Increase efficiency with a tidy workplace Optimum ergonomic conditions for healthy work Colour:silver Material:aluminium Reference:509023

Document sleeve with study crease to hang over boxes or other containers. • Document sleeve in A6 landscape format with sturdy fold to hang over cartons, boxes or other containers • Also for insertion between stacked cartons • Coloured rear foil made of durable hard plastic • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A6 landscape / 148 x 105 mm (W x H) • Fold width: 24 mm / overhang: 55 mm • Suitable printable insert labels: Article number 485102 Colour:dark blue Material:plastics Reference:172107

Self-adhesive standard anti-slip tape for securing paths, steps or ramps. • Self-adhesive standard anti-slip tape for improved safety of paths and treads • Suitable for indoor and protected outdoor use • The anti-slip coating helps to secure paths and steps • Areas of application are steps, ramps, industrial floors and treads on machines and vehicles • In accordance with ASR A1.5/1.2 "Floors" to DIN 51130 slip resistance (R group) R13 • Length: 15 m Colour:yellow/black Material:pressboard, aluminium Reference:1083130

Tabs for folders, file boxes and document storage Organise, sort and archive: Find a variety of different tabs for every requirement. Whether with welded, embossed or coloured tabs. Whether sleeve indexes or indexes with extra width for use with documents in brochure pockets. Whether for storage in index boxes or folders. For alphabetical, numerical, calendar and individual subdivision of documents - functional variety is guaranteed. You will also find the right display board system for the orderly storage of documents within easy reach. Colour:white Material:plastics Reference:616202

Coarse self-adhesive anti-slip tape for securing heavily used paths, steps or ramps. • Coarse self-adhesive anti-slip tape for improved safety of paths and tread surfaces in industrial areas • Suitable for use on exposed surfaces indoors and protected outdoors • The anti-slip coating helps to secure paths and steps • The coarse granules provide durable slip resistance even when heavily soiled and subjected to heavy use • Areas of application are steps, ramps, industrial floors and treads on machines and vehicles • In accordance with ASR A1.5/1.2 "Floors" to DIN 51130 slip resistance (R group) R13 Colour:black Material:pressboard, aluminium Reference:109601

Self-adhesive standard anti-slip tape for securing paths, steps or ramps. • Self-adhesive standard anti-slip tape for improved safety of paths and treads • Suitable for indoor and protected outdoor use • The anti-slip coating helps to secure paths and steps • Areas of application are steps, ramps, industrial floors and treads on machines and vehicles • In accordance with ASR A1.5/1.2 "Floors" to DIN 51130 slip resistance (R group) R13 Colour:black Material:pressboard, aluminium Reference:108401

The ideal aid for laying paving on a gravel bed. Extra-large bearing surface for better slab stability (solid version). For footfall sound insulation and decoupling or as a low-height standalone slab support (rubber-coated version).

Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting... Available sections:35, 48, 60, 90, 120, 180, 250 Deep anodizing of raceways with hardness of 700 HV for about 60 μm in depth:Deep anodizing of raceways with hardness of 700 HV for about 60 μm in depth Management of misalignments to ± 4 mm with oscillating slider and to ± 1.5 mm with v-shaped rollers:Management of misalignments to ± 4 mm with oscillating slider and to ± 1.5 mm with v-shaped rollers Maximum speed during function:15 m/s (depending on the type of application) Maximum Acceleration:10 m/s2 (depending on the type of application) Maximum radial load capacity:14,482 N (per slider) Temperature interval:from -30 °C to +80 °C Maximum rail length:7,500 mm (a longer stroke is available for jointed versions) Speedy Rail self-supporting linear rails:Speedy Rail self-supporting linear rails Linear rail, self-supporting rail, self supporting rail, structural rail, Speedy Rail, Speedy Rail r:Linear rail, self-supporting rail, self supporting rail, structural rail, Speedy Rail, Speedy Rail r Rollon, linear rails, Speedy Rail:self-supporting extruded aluminum rail

Our classic product in countless variations. With or without a 2 mm base plate. For easy, systematic slab laying on solid/ level substrates.

Micanite is a kind of insulation paper which is impregnated with a heat resistant binder and afterwards pressed in several shifts under heat and high pressure to plates. This material is heat resistant up to 350 °C, as special construction (Phlogopit) up to 450 °C, and is used for the wire wound formers as well as for the encapsulating cover plates of mica surface heaters. Because of the typical "sandwich"-construction of Micanite Flat Heating Elements and their high watt density it is necessary to use a platen to press the mica heater onto the surface to be heated. Established on the market for round Flat Heating Elements are some standard dimensions (Ø 58 / Ø 65 / Ø 80 / Ø 100 / Ø 160 / Ø 260 mm). But normally Micanite Surface Heating Elements are constructed on customer's request. Mica heaters can be metal sheathed for higher mechanical stability. This makes the heater flexible, so that it is also possible to build a band heater.

Finned Tubular Heaters are the ideal solution for air or gas flow heating processes. The ribs enlarge the heat-releasing surface significantly. Basis of the finned tubular heaters are our 8.5 mm tubular heaters. The outer diameter of the fins is 28 mm. The elements can be delivered straight, U-shaped or circular (special design on request). Tubular heater as well as fins are made of stainless steel, the standard for the tube is 1.4828 (other materials possible as in chapter Round Tubular Heaters), the fins are normally made of 1.4301 (1.4571 on request). Terminations for finned heaters::6,3 mm blade terminal Terminations for finned heaters::M4 threaded pin Terminations for finned heaters::With fibreglass leads

• Per il taglio pulito di stampi di pezzi di plastica o di materiali morbidi come il piombo • Tagliente senza taglio raso • Con tagliente regolabile mediante la vite di registro (solo modello 133FG) • con molla di apertura • Impugnatura rivestita in plastica • In acciaio speciale per utensili, forgiato, temprato a olio Lunghezza in millimetri:160 Peso in grammi:165

• Per tagliare cavi in rame e alluminio con guaina in gomma dura o plastica • Speciale geometria di taglio e tagliente di precisione per tagli puliti e senza sbavature • Il dispositivo di serraggio del cavo a cricchetto garantisce un taglio senza schiacciamenti • Non indicato per fili di acciaio, leghe di alluminio e conduttori in rame trafilati crudi • Sblocco della lama in ogni posizione di taglio • Azionamento ottimale della leva, maneggiamento semplice e dispendio minimo di energia grazie al principio a cricchetto • In acciaio speciale, altamente resistente, parti particolarmente sollecitate indurite e temprate Lunghezza in millimetri:280 Peso in grammi:700

• Versione particolarmente snella e leggera da portare nella tasca della camicia o del camice, con clip di fissaggio • Adatto a quasi tutti i comuni quadri elettrici e dispositivi tecnici di chiusura • Profili chiave per i settori: Elettrotecnica, termosifoni e impianti sanitari, tecnologia di climatizzazione e ventilazione, tecnologia industriale ed edilizia, per esempio per quadri elettrici, quadri di comando, sistemi di chiusura, impianti tecnici, sistemi di chiusura, impianti tecnici e tanto altro • Con imboccatura reversibile (1/4") in acciaio per utensili di alta qualità con tempratura speciale • Alloggiamento di comuni inserti Bits da 1/4“, con un magnete permanente per il fissaggio • Con torcia LED a forte intensità luminosa nella clip • Il meccanismo a rotazione consente di posizionare fino a quattro differenti profili chiave. • In plastica rinforzata con fibra di vetro • In zinco pressofuso (GD-Zn) Lunghezza in millimetri:155 Peso in grammi:130

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900 Length in millimeters:700 Weight in Grams:2400

• For securely holding, clamping and tensioning round, profile and/or flat material • Field of application: round and flat materials • With wire cutter • High clamping pressure due to toggle lever transmission • With quick-release and adjusting screw • Usable with one hand • Black powder coated • Pliers body made of extremely high tensile spring steel • Jaws made of chrome-vanadium steel, forged Length in millimeters:250 Weight in Grams:575

The right drive solution for every challenge: The SN3B gear series is one of the most flexible and universally usable gear series form Ruhrgetriebe. The single stage gearboxes are available with a solid or hollow shaft - with or without flange. Available are different gear- and shaft positions and a large number of different motors. SN3B-Gear types: SN3B / SN3B4 / SN3BFH / SN3BH / SN3BHFL — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Solid (SN3B /SN3B4) or hollow shaft (SN3BFH /SN3BH / SN3BHFL) — Ratios: 5; 7; 11; 12; 15; 17; 20; 24; 30; 32; 38; 50; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page. Gear type:SN3B /SN3B4 /SN3BH / SN3BFH / SN3BHFL Ratios:5; 7; 11; 12; 15; 17; 20; 24; 30; 32; 38; 50; 56; 75 Permissible torques:11-17 Nm Effective torques:3,2-23 Nm Output speed:19 - 560 rpm Lubricant:Certified for use in the food industry Shaft design:Solid or hollow shaft

1, 2 and 3 Cartesian axis linear modules with rack and pinion drive guarantee precise manipulation of loads from 10 up to 2000 kg with fast and silent functioning. Our main application fields are: robotics, palletization, production line, logistics and manufacturing machines with Cartesian axis movements. Our products stand out for their: easy and quick assembly; high quality and competitive performances; reduced and simplified maintenance; wide range of integrated solutions; possibility of customised solutions; constant technical support and CAD drawings available. Strong points include: hardened sloping tooth racks (ground on request); payloads from 10 to 2000 Kg; up to 12-m beams (longer lengths can be obtained with jointed versions), high level torsional rigidity, precise shape; precise machining of all profiles (on request: repeatability up to +/-0.05mm); hardened and ground steel guide rails, for rollers and ball slides with cage; easy installation of pre-assembled systems... High load capacities till:4000 kg Max. speed:3,5m/s Max. acceleration:10m/s Max. repeatability:+/- 0,05mm

The Easyslide is a system of cold drawn steel linear rails with induction hardened raceways. The linear guides consists of an external 'C' profile linear rail and incorporated caged ball bearings. Five rail widths: 22, 28, 35, 43 and 63mm The sliders inside the linear rails ensure an exceptionally compact system System high load capacity Optimal operation even when shocks and vibrations are experienced Multiple standard lengths available depending on the linear rail section (up to 2,000mm). Special lengths are available on request The Easyslide product family includes compact size linear rails with caged ball bearings, fitted with one or more sliders per rail, to ensure high load capacity and long life. If more than one slider is used in the SN series, they can slide independently inside their own cages, or simultaneously in a single cage. The SNK series features rails with hardened and ground raceways. Variable slider strokes and lengths can be selected. All Easyslide linear... Available for the SN series linear rails:22, 28, 35, 43, 63 Available for the SNK series linear rails:43 Rail induction hardened raceways:Rail induction hardened raceways Ground raceways for the SNK series:Ground raceways for the SNK series Cold drawn steel rails and sliders:Cold drawn steel rails and sliders Hardened steel ball bearings:Hardened steel ball bearings Rail max. operating speed 1.5 m/s (for the SNK series):Rail max. operating speed 1.5 m/s (for the SNK series) Temperature range for the SN series from -20 °C to +170 °C:Temperature range for the SN series from -20 °C to +170 °C Temperature range for the SNK series from -20 °C to +70 °C:Temperature range for the SNK series from -20 °C to +70 °C Electro-galvanized in compliance with ISO 2081. Alternative corrosion protection treatments availabl:Electro-galvanized in compliance with ISO 2081. Alternative corrosion protection treatments availabl Linear precision 0.1mm/m of stroke:Linear precision 0.1mm/m of stroke

• Para el corte liso de salientes en piezas de plástico o materiales blandos como el plomo • Cuchillas sin filo cortante • Con tope de cuchilla regulable mediante tornillo de ajuste (sólo modelo 133FG) • Con resorte de apertura • Empuñaduras revestidas de plástico • De acero especial para herramientas, forjado y templado en aceite Longitud en milímetros:160 Peso en gramos:135

• Para el corte liso de salientes en piezas de plástico o materiales blandos como el plomo • Cuchillas sin filo cortante • Con tope de cuchilla regulable mediante tornillo de ajuste (sólo modelo 133FG) • Con resorte de apertura • Empuñaduras revestidas de plástico • De acero especial para herramientas, forjado y templado en aceite Longitud en milímetros:160 Peso en gramos:135

Monitorhalterung – hochfest, flexibel und individuell anpassbar Der RK Monitorhalter ist für Monitore, Bediengehäuse und Touchpanels bis 25 kg ausgelegt und bietet viele Freiheitsgrade. Der Bildschirm lässt sich drehen, neigen und schwenken und – bei Anbringung an einem Rund- oder Vierkantrohrsystem – auch in der Höhe verstellen. Werkzeuge sind dafür nicht erforderlich! Sämtliche Freiheitsgrade können über Hebel-/Griffschrauben getrennt voneinander eingestellt werden. Die Verstellung der Neigung erfolgt in 15°-Schritten und ist vibrationssicher arretierbar. Monitoranbindung über VESA-Halter oder Universalhalter Ein großer Pluspunkt der Halter ist die umfassende Flexibilität hinsichtlich der Anschlussmaße für Endgeräte und der Montagemöglichkeiten. Der Anwender kann die Bildschirme/Bediengehäuse wahlweise über eine Anschlussplatte nach VESA Standard 75/100 – also mit einem 75 x 75 mm oder 100 x 100 mm großen Befestigungslochmuster – oder einer runden Universalanschraubfläche aus...

• Versione particolarmente snella e leggera da portare nella tasca della camicia o del camice, con clip di fissaggio • Adatto a quasi tutti i comuni dispositivi tecnici di chiusura • Profili chiave per i settori: Termosifoni e impianti sanitari, tecnologia di climatizzazione e ventilazione, tecnologia industriale ed edilizia, per esempio per porte e finestre in edifici nuovi, sistemi di chiusura, impianti tecnici e tanto altro • Con imboccatura reversibile (1/4") in acciaio per utensili di alta qualità con tempratura speciale • Alloggiamento di comuni inserti Bits da 1/4“, con un magnete permanente per il fissaggio • Il meccanismo a rotazione consente di posizionare fino a tre differenti profili chiave. • Con torcia LED a forte intensità luminosa nella clip • In plastica rinforzata con fibra di vetro • In zinco pressofuso (GD-Zn) Lunghezza in millimetri:155 Peso in grammi:150

Aluminiumwerk Unna AG s’est spécialisée dans la production de tubes en aluminium. Les tubes sont produits sur notre site par les presses d’extrusion. Nous pouvons réaliser les tubes selon deux procédés de production bien différents : filés sur aiguille ou filés à pont. Il est relativement simple de pouvoir distinguer les deux méthodes de fabrication. Le filage sur aiguille consiste à ce qu’un mandrin fixé dans le piston de notre presse donne la forme intérieure du tube. Par comparaison, si nous extrudons un tube par le procédé du filage à pont, le mandrin est fixé et tenu par plusieurs bras de support – les ponts – à l’intérieur d’un outillage d’extrusion.

• Con función de aislamiento para conductores de uno o varios hilos con sección de 1,5 mm² y 2,5 mm² • Para cortar alambres duros y blandos • Los filos están adicionalmente templados por inducción • Superficies prensoras dentadas • Cabeza acodada ergonómica • Llave de estrella integrada • Con resorte de apertura y dispositivo cerrador • Articulación de fuerza con transmisión de palanca óptima para un trabajo sencillo y descansado • Empuñaduras ergonómicas con fundas de varios componentes SoftGripp • El diseño ergonómico de los alicates permite un trabajo descansado y protege al mismo tiempo los tendones y articulaciones del usuario. • De acero para herramientas, forjado y templado en aceite Longitud en milímetros:200 Peso en gramos:290

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered Length in millimeters:280 Weight in Grams:700