Produktai skirti aptvaru (367)

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Textured black version is coated with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance. • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. • Standard versions are designed to meet IP54. • Water-tight versions are designed to meet IP65 and include a gasket. Gasket is supplied loose inside the enclosure (not pre-installed). • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Buy BO2DBB (BO2 Series IP67 Enclosures with Deep Base (78mm) - BCL Enclosures) - Black / Black - 80mm x 106mm x 78mm - ABS Plastic - IP67. Purchase BO2DBB at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

Buy BO1SBG (BO1 Series IP67 Enclosures with Standard Base (53mm) - BCL Enclosures) - Black / Grey - 80mm x 73mm x 53mm - ABS Plastic - IP67. Purchase BO1SBG at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

C3R24248SCNKO (Hammond Manufacturing Electrical Enclosures) C3R SC NKO Series - For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Buy BO2DBG (BO2 Series IP67 Enclosures with Deep Base (78mm) - BCL Enclosures) - Black / Grey - 80mm x 106mm x 78mm - ABS Plastic - IP67. Purchase BO2DBG at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining Black screws are included to enhance appearance. • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. • Standard versions are designed to meet IP54. • Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed). • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Ideally suited for dongles and/or mounting small printed circuit boards with USB connectors. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of three (3) lengths in five (5) colours. Stocked in black, grey, translucent clear, translucent smoke and translucent red. • Satin texture finish. • Cover is recessed for easy label installation. • Complete with lid and two self tapping screws (plated for grey and clear, black for all other colours). • Two (2) or four (4) P.C. board standoffs moulded into interior depending on enclosure size. • Designed to meet IP54. • USB connector is not included.

Product Features: • Ideally suited for housing electronics for DIN rail-mounted devices. Applications include: • Industrial drives and controls • Automation • HVAC • IoT • Mounts to standard symmetrical 35mm DIN rail. • Dark grey mounting base moulded from PPE and PS. • Light grey main enclosure body moulded from polycarbonate. • Material carries a flammability rating of UL94-V0. • Designed to meet IP20. • Snap closures for easy assembly. • 5 Models available. • 4 Types of covers sold individually for use in a wide variety of applications.

Buy BO1SBB (BO1 Series IP67 Enclosures with Standard Base (53mm) - BCL Enclosures) - Black / Black - 80mm x 73mm x 53mm - ABS Plastic - IP67. Purchase BO1SBB at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

Product Features: • Ideally suited for mounting small printed circuit boards or used as potting boxes. • Moulded in a choice of black, grey or translucent blue general purpose ABS plastic. • Satin texture finish. • Complete with lid and two self tapping screws. • This series is also available with flanged lids. • Screws are colour matched to enclosure (nickel plated screws with grey enclosures and black plated with black enclosures). • 2 P.C. board standoffs moulded into interior. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Some sizes are available with a keyring kit. • Models with key ring kit are predrilled in the narrow side.

Buy AB99 (AB Series Adaptable ABS Plastic Enclosures - BCL Enclosures) - Black - 240mm x 190mm x 40mm - ABS Plastic. Purchase AB99 at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include one horizontal row of louvers for ventilation. • Choice of sloping or vertical sides by reversing case. • Includes an handle (Part number 1427C1) and holes in the top for mounting. Also includes plastic plugs if handle is not desired. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware. • Assembled with 8 machine screws into weld-nuts for repetitive assembly and disassembly.

Buy BO1DBB (BO1 Series IP67 Enclosures with Deep Base (78mm) - BCL Enclosures) - Black / Black - 80mm x 73mm x 78mm - ABS Plastic - IP67. Purchase BO1DBB at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 82mm (2U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 55mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 108mm, 136mm, 168mm and 228mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 44.2mm (1U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 200mm • Maximum component height of 31mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include Mounting Lugs, DIN Rail Clips, Clip on Mounting Brackets, etc.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Available in natural vibra finish OR in light textured, black powder paint. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance. • Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed. • M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes. • Designed to meet IP54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available. • All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262.

Product Features: • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit into the user's hand. • Designed to meet IP54 ratings. • Recessed top for membrane display or pad. • Units with battery door use the long life "three snap" door. • Lap joint construction provides protection against dust accumulation and splashing water. • Moulded in a choice of black, grey or transparent blue general purpose ABS plastic with a satin texture. • Unit is secured with self tapping screws. • Black and transparent blue enclosures include black screws, grey includes nickel finish screws.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Also suited for vertical or horizontal mounting of printed circuit boards (using optional P.C. card guides). • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Stocked in black with matte textured finish.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Standard versions from flame retardant ABS plastic (carries a UL flammability rating of 9V-0). • On standard and water-tight versions, countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly required. • Economy version is moulded in general purpose ABS plastic. • Economy version utilizes self tapping screws into plastic posts (no brass inserts). • Standard and economy versions are rated IP54, but can be upgraded to IP66 with gaskets and screws with O-rings. • Water-tight versions are rated IP66. • Stocked in black and grey with matte textured finish.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Two piece "tongue and groove" construction with a replaceable one-piece silicone rubber gasket provides protection against access of dust and water. Gasket supplied loose inside the enclosure (not pre-installed). • Gasket has a temperature rating of -40C to +150C. • Ideal for repetitive opening and closing. • Four recessed stainless steel machine screws secure lid into tapped holes. • Easy to wall mount using "through box - blind hole" construction, outside of gasket protection. • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). Note: Except for 1590Z060, 1590Z061, 1590Z062 and 1590Z063. • Designed to meet IP68. • North American Mark of Safety - cUL and UL listed. Certified to Type 4, 4X, 6, P.

Buy BO1DBG (BO1 Series IP67 Enclosures with Deep Base (78mm) - BCL Enclosures) - Black / Grey - 80mm x 73mm x 78mm - ABS Plastic - IP67. Purchase BO1DBG at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Made of strong, economical 20 gauge steel. • Rugged powder coat finish: beige panels with textured black covers. • Choice of sloping or vertical front panels by reversing case. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Factory powder coated to save stomp box manufacturers and experimenters time and money. • Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining. • Smooth finish allows for easy adhesion of labels and/or silk screens. • Colours are matched to standard RAL colours. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Designed to meet IP54. IP65 rating available, but this also requires water-tight screws. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Moulded from a grey, glass reinforced polyester. Smooth finish. • Includes gasketed lid with two piece "tongue and groove" construction. • Heavy duty, thick wall design. • North America Mark of Safety - C UL and UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) - File #E65324 and IP66 rated. • Impact rating of IK08 per IEC62262. • Lid contains self captivated stainless steel screws. • Gasket material is Mohogumi rubber (EDPM). Heat resistance 100-120°C, cold -40°C. • Easy wall mounting via "through box - blind hole" construction, outside of the gasket protection. • Internal mounting shelf and bonding / mounting nuts moulded in. • Optional 16 gauge, galvanized steel inner panels available.

Buy AB88 (AB Series Adaptable ABS Plastic Enclosures - BCL Enclosures) - Black - 178mm x 122mm x 74mm - ABS Plastic. Purchase AB88 at low prices - world wide shipping.<br><br>If you have any questions regarding any product or would like to enquiry about stock availability, larger pricing brackets and customisation options, simply click View on Supplier's Website or call +44 01535 636856 or E-Mail sales@kgaenclosures.com, where we will be happy to assist you.

C3R303012SCNKO (Hammond Manufacturing Electrical Enclosures) C3R SC NKO Series - For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

To see more information on this great range of products, simply click the link above or visit https://kgaenclosures.com We have over 30,000 products from great manufacturers, including Hammond Manufacturing, Deltron Manufacturing and Hylec APL Electronics. All products are available at great low competitive prices, with world-wide shipping available.

Product Features: • Strong construction yet light weight using all aluminium components. • Suitable for desk top or rack mountable applications. • Knockdown design ships un-assembled for easy handling and shipping protection. • Strong construction using: • Extruded aluminium side panels 0.125" (3.2mm) thick • Extruded aluminium front and rear panels 0.125" (3.2mm) thick • Flat aluminum top and bottom panels 0.064" (1.6mm) thick • Can be used with or without rack mounting brackets (one pair included). • Front and rear panel are interchangeable. • Enclosure is finished in rugged, textured, black powder coat. • Includes top, bottom, side, self adhesive rubber feet, rack mount brackets and all assembly hardware. • Pull handles and adjustable rear bracket rack mount kit (for deeper models) are not included with unit. • RoHS compliant. • Manufactured in North America.

Product Features: • Heavy duty, 18 gauge steel top and bottom halves finished in beige powder coat. • Easy to machine 0.064" thick aluminium panels, front finished in textured black and vented back finished in beige. • Rear panel is vented at top and bottom. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.