Produktai skirti aptvara (15)

TS IT, sealed, for direct enclosure-specific climate control. 482.6 mm (19") interior installation with depth-variable 482.6 mm (19") mounting angles for a load capacity of up to 1,500 kg, available in a range of size variants. TS IT, 19" mounting angles, glazed door, WHD: 600 x 2000 x 1000 mm, 42 U Material:Sheet steel, Aluminium Glazed door Material:Single-pane safety glass, 3 mm Surface finish Enclosure frame:Dipcoat-primed Surface finish Interior installation:Dipcoat-primed Surface finish Doors and roof:Dipcoat-primed, powder-coated Enclosure frame and panels Colour:RAL 7035 Interior installation Colour:RAL 9005 Supply includes:TS 8 enclosure frame with doors and roof plate, Glazed aluminium door at the front, 180° hinges Note:Depending on how and where it is sited, the door opening angle may vary for selected applications Basic material:Sheet steel Dimensions Width:600 mm Dimensions Height:2,000 mm Dimensions Depth:1,000 mm Installation height for components:42 U Distance between levels as delivered:745 mm 482.6 mm (19") version:Mounting angles, 482.6 mm (19") Construction doors:Solid Free mounting space to the 482.6 mm (19") level, front/rear:84 mm / 168 mm load capacity:15,000 N Packs of:1 pc(s) Weight/pack:98.6 kg EAN:4.02818E+12 Customs tariff number:94032080 ETIM 7.0:EC002499 ETIM 6.0:EC002499 eCl@ss 8.0/8.1:27180207 eCl@ss 6.0/6.1:27180207

Compact 482.6 mm (19") enclosure for small networks that may be used as a wall-mounted. Compact 482.6 mm (19") enclosure for small networks. DK VerticalBox, WHD: 300x550x600 mm, 5 U Benefits:May be used as wall-mounted, under-desk or desktop enclosure, Free access from three sides Material:Sheet steel Viewing window Material:Single-pane safety glass, 3 mm Surface finish:Powder-coated Colour:RAL 7035 Supply includes:Enclosure with glazed door, Side panels (1 x fixed, 1 x slot-in) with vent slots Basic material:Sheet steel Dimensions Width:300 mm Dimensions Height:540 mm Dimensions Depth:600 mm Installation height for components:5 U Packs of:1 pc(s) Weight/pack:17.04 kg EAN:4.02818E+12 Customs tariff number:94032080 ETIM 7.0:EC002500 ETIM 6.0:EC002500 eCl@ss 8.0/8.1:27180208 eCl@ss 6.0/6.1:27180208

Flat-packed enclosure. For optimum access and flexible use as a wall-mounted or floor-standing enclosure. For flexible use as a wall-mounted or floor-standing enclosure. DK FlatBox, WHD: 600x358x400 mm, 6 U, with 482.6 mm (19") mounting angles Design:with 482.6 mm (19") mounting angles Benefits:Tool-free quick assembly System assembly on the open 482.6 mm (19") frame Material:Sheet steel Viewing window: Single-pane safety glass, 3 mm Surface finish:Powder-coated Colour:RAL 7035 Note:Max. installation depth: Depth - 58 mm to rear panel Max. distance between two 482.6 mm (19") Basic material:Sheet steel Dimensions:Width: 600 mm, Height: 358 mm, Depth: 400 mm Installation height for components:6 U load capacity:max. 300 N Packs of:1 pc(s) Weight/pack:17.845 kg EAN:4028177551398 Customs tariff number:94032080 ETIM 7.0:EC002500 ETIM 6.0:EC002500 eCl@ss 8.0/8.1:27180208 eCl@ss 6.0/6.1:27180208

Baying systems VX, for installation with partial doors and internal separation in a modular design. VX Modular enclosure, WHdepth 600x2200x800 mm, sheet steel Material:Sheet steel, 1.5 mm Enclosure frame:Dipcoat-primed Rear panel:Dipcoat-primed, powder-coated on the outside, textured paint Gland plates:Zinc-plated Colour:RAL 7035 Protection category IP to IEC 60 529:Up to IP 54, depending on the panels Basis of test:IEC 61 439-1/-2 IEC 61 641 Supply includes:Enclosure frame Rear panel Gland plates Dimensions:Width: 600 mm Height: 2,200 mm Depth: 800 mm Packs of:1 pc(s) Weight/pack:55.8 kg EAN:4028177929715 Customs tariff number:94032080 ETIM 7.0:EC000261 ETIM 6.0:EC000261 eCl@ss 8.0/8.1:27180101 eCl@ss 6.0/6.1:27370301

Terminal boxes, stainless steel 1.4301 (AISI 304), Protection category IP 66. KL Terminal box, WHD: 150x150x80 mm, Stainless steel 1.4301, without mounting plate, with cover, without gland plate Enclosure:Stainless steel 1.4301 (AISI 304) Protection category IP to IEC 60 529:IP 66 Protection category NEMA:NEMA 4X IK Code:IK08 Supply includes:Enclosure with cover Quick-release fastener including plastic bushes Basic material:Stainless steel width:150 mm height:150 mm Depth:80 mm Material Thickness:Enclosure: 1.25 mm, Cover: 1.25 mm Number of locks:4 Packs of:1 pc(s) Weight/pack:1.3 kg EAN:4028177008441 Customs tariff number:85389099 ETIM 7.0:EC002713 ETIM 6.0:EC002713 eCl@ss 8.0/8.1:27180101 eCl@ss 6.0/6.1:27180101

The small enclosure KX, terminal box KX, without a gland plate allows for flexible interior installation while maintaining a high protection category. The small enclosure KX, terminal box KX, without a gland plate allows for flexible interior installation while maintaining a high protection category. KX Terminal box, WHD: 150x150x120 mm, sheet steel, without mounting plate, with cover, without gland plate. Enclosure material:Sheet steel Cover Material:Sheet steel, all-round foamed-in PU seal Enclosure and cover Surface finish:Dipcoat primed, powder-coated on the outside, textured paint Colour:RAL 7035 Protection category IP to IEC 60 529:IP 66 Protection category NEMA:NEMA 4 Type rating to UL 508A:Type 3R/4 IK Code:IK08 Supply includes:Enclosure with cover, Mini cam lock Basic material:Sheet steel Dimensions Width:150 mm Dimensions Height:150 mm Dimensions Depth:120 mm Material thickness Enclosure:1.25 mm Material thickness Cover:1.25 mm Packs of:1 pc(s) Weight/pack:1.46 kg EAN:4.02818E+12 Customs tariff number:85389099 ETIM 7.0:EC002713 EC002713:EC002713 eCl@ss 8.0/8.1:27180101 eCl@ss 6.0/6.1:27180101

System perfection. The new compact enclosure AX (sheet steel) offers maximum data quality and consistency in engineering, and flexibility and safety in assembly and interior installation. AX Compact enclosure, WHD: 380x300x210 mm, sheet steel, with mounting plate, single-door, with one cam lock Enclosure material:Sheet Steel Door Material:Sheet steel, all-round foamed-in PU seal Enclosure and door Surface finish:Dipcoat primed, powder-coated on the outside, textured paint Mounting plate Surface finish:Zinc-plated Colour:RAL 7035 Protection category IP to IEC 60 529:IP 66 Protection category NEMA:NEMA 4 Type rating to UL 508A:Type 3R/4 IK Code:IK10 Supply includes:Enclosure with door(s), Gland plate(s) in enclosure base, Mounting plate, Perforated door strip Basic material:Sheet steel Dimensions Width:380 mm Dimensions Height:300 mm Dimensions Depth:210 mm Enclosure Material thickness:1.25 mm Door Material thickness:1.5 mm Mounting plate Material thickness:2 mm Mounting plate Width:330 mm Mounting plate Height:275 mm Number of doors:1 Door hinged on the right, may be swapped to the left:yes Number of cam locks:1 Lock version:Cam Number of locks:1 Lock insert:3 mm double-bit Gland plate, size:2 Gland plate, qty.:1 Packs of:1 pc(s) Weight/pack:8.8 kg EAN:4.02818E+12 Customs tariff number:94032080 ETIM 7.0:EC000261 ETIM 6.0:EC000261 eCl@ss 8.0/8.1:27180101 eCl@ss 6.0/6.1:27180101

Machine equipped with door and pneumatic clamping device. The corresponding support surface enables the machining of cubes up to a maximum depth of 1400 mm. For additional machining of enclosures that cannot be dismantled on Perforex machining centres BC. Machining of cubics f. BC 1001 Design:Machining surface with door,Pneumatic clamping device, Additional support surface Benefits:Depth-variable, Use of the existing machine surface for the additional machining of cubes Note:Not suitable for retrofitting To fit Model No.:4050.101 Maximum machinable area for cubic parts (W x H):750 mm x 1400 mm Dimensions of clampable cubic parts (W x H x D):1200 x 1400 x 1400 mm for:BC 1001 HS Packs of:1 pc(s) EAN:4.02818E+12 Customs tariff number:84669360 ETIM 7.0:EC003456 ETIM 6.0:EC003456 eCl@ss 8.0/8.1:36609190 eCl@ss 6.0/6.1:36609190

Outdoor enclosure with 100 mm transport plinth and rain canopy with projections on all sides. Side panels, rear panel and door fully double-walled on the outside, the entire TS 8 frame is available for interior installation. Outdoor enclosure with 100 mm transport plinth and rain canopy with projections on all sides. Side panels, rear panel and door fully double-walled on the outside, the entire TS 8 frame is available for interior installation. Enclosure frame Material:Stainless steel 1.4301 (AISI 304) Enclosure panels and base/plinth trim Material:Aluminium, AlMg3 Rain canopy Material:Aluminium Surface finish:Powder-coated UV-resistant pure polyester Colour:RAL 7035 Protection category IP to IEC 60 529:IP 55 Supply includes:Double-walled outdoor enclosure, fully preconfigured, TS 8 frame with 25 mm system Note:All enclosure panels are doubled and earthed (external wall onto internal wall) Basic material:Aluminium Dimensions Width:800 mm Dimensions Height:1,200 mm Dimensions Depth:800 mm Packs of:1 pc(s) Weight/pack:86 kg EAN:4.02818E+12 Customs tariff number:94032080 ETIM 7.0:EC000261 ETIM 6.0:EC000261 eCl@ss 8.0/8.1:27180101 eCl@ss 6.0/6.1:27180101

For mounting 482.6 mm (19") equipment. VX Swing frame, small, for W: 600/800 mm, 9 U Material:Sheet steel Surface finish:Zinc-plated Supply includes:Cam with double-bit lock insert. Parts for attaching to the installation kit Note:The swing frame stay is required to lock the open swing frame. To fit:Enclosure type: VX/AX width:600 mm width:800 mm height:≥600 mm Units:9 U Packs of:1 pc(s) Weight/pack:5.09 kg EAN:4.02818E+12 Customs tariff number:94039010 ETIM 7.0:EC002620 ETIM 6.0:EC002620 eCl@ss 8.0/8.1:27189261 eCl@ss 6.0/6.1:27189261

The large enclosures in the VX25 series offer a good level of shielding across a broad frequency range, even in the standard version. For increased EMC requirements, Rittal offers the VX25 enclosure in a version certified by the VDE with high RF attenuation. VX Baying enclosure system, WHD: 800x2000x800 mm, Sheet steel, EMC version, with mounting plate, single door at the front Enclosure frame:Sheet steel with zinc magnesium coating, 1.5 mm Roof:Sheet steel with zinc magnesium coating, 1.5 mm Door:Sheet steel with zinc magnesium coating, 2.0 mm Rear panel:Sheet steel with zinc magnesium coating, 1.5 mm Gland plates:Sheet steel, 1.5 mm Mounting plate:Sheet steel, 3.0 mm Enclosure frame:Uncoated Colour:RAL 7035 Protection category IP to IEC 60 529:IP 55 Protection category NEMA:NEMA 12 Type rating to UL 508A:Type 1, 12 Supply includes:Enclosure frame, Door, Door hinged on the right, may be swapped to the left, Rear panel, Roof plate width:800 mm height:2,000 mm Depth:800 mm Number of doors:1 Packs of:1 pc(s) Weight/pack:135 kg EAN:4028177924468 Customs tariff number:94032080 ETIM 7.0:EC002623 ETIM 6.0:EC002623 eCl@ss 8.0/8.1:27180101 eCl@ss 6.0/6.1:27180101

Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits. SK enclosure heater, without fan, 8-10 W, 110-240 V, 1~, 50/60 Hz, WHD: 45 x 120 x 46 mm Material:Aluminium, anodised Protection category IP to IEC 60 529:IP 20 Supply includes:PTC heater Quick-connection terminal Assembly parts Note on Model No.:Special voltages available on request. We reserve the right to make technical modifications. Continuous thermal output at 10 °C:8 W - 10 W Rated operating voltage:110 V - 240 V, 1~, 50 Hz/60 Hz Dimensions:Width: 45 mm Height: 120 mm Depth: 46 mm Miniature circuit-breaker/fuse:2 A eCl@ss 8.0/8.1:27180710 Packs of:1 pc(s). Weight/pack:0.21 kg EAN:4028177638617 Customs tariff number:85162999 ETIM 7.0:EC000737 ETIM 6.0:EC000737 eCl@ss 8.0/8.1:27180710 eCl@ss 6.0/6.1:27180710

Four widths and two different depths are the basis for every TopConsole solution. TP TopConsole system, pedestal, WHD: 600x675x400 mm, Sheet steel Enclosure:Sheet steel 1.5 mm Door and console cover:Sheet steel, 2.0 mm, all-round foamed-in PU seal Mounting plate:Sheet steel, 3.0 mm Surface finish:Dipcoat-primed, powder-coated on the outside, textured paint Mounting plate: Zinc-plated Colour:RAL 7035 Protection category IP to IEC 60 529:IP 55 with selection of the appropriate gland plates Protection category NEMA:NEMA 12 with selection of the appropriate gland plates or trim panel IK Code:IK08 Supply includes:Enclosure open at top Door, front Mounting plate Open base for individual cable entry Basic material:Sheet steel width:600 mm height:675 mm Depth:400 mm Mounting plate:Width: 499 mm, Height: 625 mm Number of doors:1 Packs of:1 pc(s) Weight/pack:34 kg EAN:4028177554078 Customs tariff number:94032080 ETIM 7.0:EC000784 ETIM 6.0:EC000784 eCl@ss 8.0/8.1:27180504 eCl@ss 6.0/6.1:27180504

To cover outgoing sections with NH slimline fuse-switch disconnectors so that they are safe from finger contact. To cover outgoing sections with NH slimline fuse-switch disconnectors and Maxi-PLS/Flat-PLS busbar system in the rear enclosure section so that they are safe from finger contact (IP 2X). SV Contact hazard protection cover, for fuse-switch disconnector section, for TS (W: 1000 mm) Material:Sheet steel, 1.5 mm Surface finish:Zinc-plated Supply includes:Cover set, two-piece (top) Cover set, two-piece (bottom) Assembly parts Note:The specified installation width when using Maxi-PLS only applies in conjunction To fit:Enclosure type: TS, Width: =1,000 mm Packs of:1 pc(s) Weight/pack:7.6 kg EAN:4028177701557 Customs tariff number:73269098 ETIM 7.0:EC001638 ETIM 6.0:EC001638 eCl@ss 8.0/8.1:27142116 eCl@ss 6.0/6.1:27142414

Aluminium enclosure, high thermal conductivity for optimum passive heat dissipation. Low weight coupled with high stability. Protection category IP 65 to IEC 60 529. CP Compact Panel, for front panel BH 520x400 mm, installation depth 74 mm, Extruded aluminum section, Support arm connection 120x65 mm, Hinged rear panel with screw lock Design:Support arm connection, rectangular 120 x 65 mm Benefits:Aluminium enclosure, high thermal conductivity for optimum passive heat dissipation. Enclosure material:Extruded aluminium section Corner pieces Material:Die-cast zinc Corner protectors Material:Plastic Enclosure Colour:Natural anodised Corner pieces Colour:RAL 7035 Corner protectors Colour:similar to RAL 7024 Protection category IP to IEC 60 529:IP 65 Protection category NEMA:NEMA 12 Supply includes:Enclosure with cut-out for support arm connection, 3 mm double-bit lock Note:The support arm connection may be swapped over by rotating the enclosure For the configuration of subracks:with width: 520 mm Installation depth:74 mm To fit front panels with width:520 mm To fit front panels with height:400 mm Lock version:Screw lock Packs of:1 pc(s) Weight/pack:7.8 kg EAN:4.02818E+12 Customs tariff number:94032080 ETIM 7.0:EC002504 ETIM 6.0:EC002504 eCl@ss 8.0/8.1:27180505 eCl@ss 6.0/6.1:27180505