Produktai skirti apdorojimo užsakymų grąžinimas (560)

4-channel temperature acquisition module for PT100 or thermocouple with CAN - The µCAN.4.ti-F1 is the universal measurement module for mobile acquisition of temperature data. Depending on the module type, resistance sensors as well as any kind of thermocouple can be polled at an overall sample rate of 4 kHz. Temperature thermo type K:Temperature Pt100, Pt200 (2- / 4-wire) Temperature Pt500, Pt1000 (2- / 4-wire):Accuracy +/- 0.05 K Resolution 24-bit (0.001 °C):Sampling rate 1.25 ms / 800 Hz Parameterized via set-up software:Equipped with cold-junction compensation Casing powder coated Fieldbus CAN:Protocol Raw CAN

The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface. Voltage:± 10 V Current:0 mA - 20 mA Resolution:16-bit (1 mV / 1 µA) Sampling rate:up to 1 kHz Fieldbus:CAN classic / CAN FD Protocol:CANopen / CANopen FD / J1939

The module µCAN.4.ci-SNAP is equipped with 4 fast counters of up to 100 kHz. Additional four I/O terminals can be configured individually as digital inputs or outputs. Counter input / frequency measurement:A/B signal Max. input frequency 500 kHz:High precision frequency measurement Signal type freely configurable:Up and down counter Fieldbus CAN:Protocol CANopen / Raw CAN

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Temperature Pt100, Pt200 (2- / 4-wire):Temperature Pt500, Pt1000 (2- / 4-wire) Accuracy +/- 0.5 K:Resolution 16-bit (0.1 °C) Sampling rate 10 ms / 100 Hz:Signal type freely configurable Operating temperatures -40…+85 °C:Power supply voltage 9…36 V DC Fieldbus CAN:Protocol CANopen / Raw CAN

CAN FD (CAN flexible data rate) is an expasion of the “classical” CAN bus (CAN classic) and is defined by the standard ISO 11898-1:2015. CAN FD facilitates not only sending of larger data volumes (payload): the limit of 8 bytes with CAN classic has been increased to 64 bytes with CAN FD. Also, it provides the possibility of a higher bit rate within the data phase, even going beyond the previous limit of 1 MBit/s.

CANopen has been developed by the members of the international user and producer assosiation CAN in Automation (CiA). The CANopen application layer defines different communication services and protocols (e.g. process and service data) as well as a network management. CANopen is mainly used as an embedded network in machinery, but also as a general industrial communications system. It is based on the international standards ISO 11898-1 (CAN protocol) and ISO 11898-2 (fast physical layer). The CANopen application layer has been standardized by the CENELEC and is defined in the European standard EN 50325-4.

The sensor module µCAN.1.sg-SENSOR can be combined with all common pressure sensors and is designed to acquire an analogue sensor signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances can be adjusted with the module already built in. The sensor signal is linearized and monitored directly in the hardware.Strain gauge full bridge Voltage ± 20 mV Supply voltage 4.5 V Accuracy 0.2% (FS) Resolution up to 16-bit (1 mV / 1 µA) Sampling rate up to 1kHz Supply of the strain gauge full bridge Scaling / sampling rate adjustable Measurement range adjustable Operating temperatures -40°C … +85 °C Supply voltage 9 V DC … 36 V DC Fieldbus CAN classic / CAN FD Protocol CANopen / CANopen FD / J1939

Real-time Linux, Ethernet, CAN, USB plus custom electronics in a space-saving metal top-hat rail casing. In its µMIC.200 family, MicroControl integrates the best of the world of automation for IoT/Industry 4.0. The unit is equipped with COMBICON® connectors and offers versatile connection facilities for digital signals, CAN bus and RS-232. I/O modules with CAN interface can be connected to the unit via the integrated CANopen FD Master library. An even higher flexibility is offered through its customizable electronics. Two boards perfectly matched. CPU board and high performance standard board or – alternatively – a CPU board and a custom board tailored to your specific needs. The metal casing is able to withstand extreme operating environments. And all this at most favourable terms.2 Ethernet interfaces 2 CAN interfaces (isolated) 2 x RS-232 (isolated) CANopen Master function Cortex-A8 CPU with USB interface of 1 GHz frequency 4 GByte Flash and 512 MByte DDR3 RAM

The module µCAN.1.ti-SNAP is designed to acquire temperature signals via Pt100 or J, K and L type thermocouples. Temperature Thermo type J, K, L:Temperature Pt100 (2- / 4-wire) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.1 K (Pt100, Pt1000) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Signal type freely configurable:Protocol CAN / CANopen / Raw CAN

The CAN driver CANpie FD (Controller Area Network Programming Interface Environment) is an open interface for the development of CAN-based applications. The CAN driver forms the basis for higher layer protocols (CANopen / J1939) and may be used for manufacturer-specific CAN communication between embedded systems. CANpie FD is avaliable for a wide range of microcontrollers (more than 160 at the moment). A variety of configuration options facilitates adjustment to individual target systems. The CAN physical layer (data link layer) comprises two protocols: the classical CAN standard and CAN FD. The protocols are described in the ISO 11898-1:2015 specification. The CANpie FD API defines 19 functions to allow manufacturer independend access to the CAN controller to entirely support ISO specifications. The API is based on the concept of dedicated message buffers (mailboxes) in combination with acceptance masks to minimize the application

Sensors are the sensory organs of technical equipment and important components in all areas of automation. Temperatures, pressures, movement and a variety of other analogue values are detected, converted and digitally transmitted to the higher level field system. MicroControl systems are ideally suited for these applications. Up to 10 times faster and a significantly higher data throughput, 16…24 bit resolution for higher accuracy, a wide temperature range and high IP rating provide higher operating reliability, e.g. in food technology or chemical industry.

CAN (Controller Area Network) is a network concept that has been developed for the automotive industry originally. Today, CAN is especially used in networking industrial control systems, sensors and actuators based on the field bus technology. In our CAN-bus training you will learn about the physical properties of a CAN-bus system as well as protocol structure. The participants will look into the theory of hardware and software design and improve their knowledge in practical units. This CAN-bus training course forms the basis for our advanced-level workshops on CANopen and J1939. Target group CAN-bus training The target group of the CAN-bus workshop is development engineers who are looking for a quick start into the ISO standard 11898-1:2015 (Road vehicles – Controller Area Network). Also, we address decision makers and product managers to enable them to assess the suitability of the CAN-bus standard for their applications.

The CANopen Bootloader protocol stack provides the complete functionality for integration of a bootloader according to the CANopen standard in your existing devices. Versatile configuration options facilitate individual customization to a target product. The Bootloader was implemented to meet low storage requirements. The CANopen Bootloader stack comprises a reduced object dictionary and supports NMT, SDO (Expedited/Segmented/Block), Emergency, Heartbeat as well as LSS services. Up to four separate sections for storage of programmes and data may be defined. The CANopen Download Tool is used to update programmes and data of the target hardware. A defined API facilitates adjustment to a flash memory of the target hardware. Flash drivers for various controllers (e.g. STM32 series) are part of the CANpie driver.

CNCDrehteile als kundenspezifischen Artikel in jeder Losgröße, allen gängigen Güten und Oberflächen. Unsere CNCDrehteile zeichnen sich durch ihre hohe Qualität und Genauigkeit aus. Wir sind spezialisiert auf die unterschiedlichsten Abmessungen und Oberflächen. Werkstoffe S235, S355, C45k, 36Mn6, 42CrMo4, A2, A4 und Sonderwerkstoffe auf Anfrage Oberflächen roh, galvanisch verzinkt, dickschichtpassiviert, feuerverzinkt, ZinkNickel Beschichtung und Zinklammellenbeschichtung HERKUNFTSLAND:Deutschland

The µCAN.1.ai-BOX is a decentralized universal data acquisition module for analogue standard signals (current / voltage). The CAN interface supports the protocol CANopen. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.01 % (FS):Resolution 16-bit (1 mV / 1 µA) Sampling rate 20 ms / 50 Hz:Galvanically isolated fieldbus Feldbus CAN:Protocol CANopen / Raw CAN

From the Idea to Prototyping to Series Production and Evolution – MicroControl plans, develops and manufactures individual solutions. MicroControl experts will work in close liaison with the customer to realize hardware and software for the desired application. In a following step, a prototype will be developed and manufactured – either by the customer or MicroControl. In the conceptual stage, the required technical specifications of the customer’s application are checked continually.

The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.01 % (FS):Resolution 16-bit (1 mV / 1 µA) Sampling rate 5ms / 200 Hz:Resolution up to 24-bit (0,01 mV / 0,01 µA) Fieldbus CAN:Protocol CANopen / Raw CAN

From Antarctica to underground ring accelerators or field trials in biodiversity – MicroControl solutions reliably work in long-term trial settings of renowned institutes, universities and research companies. The high performance reserves of MC systems provide maximum reliability in all kinds of conditions. To achieve the best results the MicroControl experts assist researchers all over the world to find the most suitable solution.

Our online courses are held in two compact sessions of four hours each, which will save time and travelling costs. Training material (PDFs) and certificate of attendance are included. The webinars are held in German or English.Our online courses are held in two compact sessions of four hours each, which will save time and travelling costs. Training material (PDFs) and certificate of attendance are included. The webinars are held in German or English.

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Voltage +/- 10 V:Accuracy 0.01% (FS) Resolution 16-bit (1 µA):Sampling rate 5ms / 200 Hz Operating temperatures -40…+85 °C:Operating temperatures -40…+85 °C Fieldbus CAN:Protocol CANopen / Raw CAN

Solar power plants, wind parks and combined heat and power systems have established in energy generating technology. To achieve a high operating reliability, MicroControl solutions ensure perfect system control and precise transfer of measurement data. As for example in the adjustment of solar panels, in temperature measurement in block-type thermal power plants or in torsion measurement in wind power stations.

The module µCAN.1.sg-SNAP is designed to acquire strain gauge measurement signals such as forces, torques, sequences and voltages and transfers them via CAN. Voltage 0…100 mV:Supply voltage 9.0 V Strain gauge full bridge:Sampling rate 20 ms / 50 Hz Accuracy 0.1 % (FS):Resolution 16-bit (1 mV) Fieldbus CAN:Protocol CANopen / Raw CAN

CAN specifications of Bosch form the basis of all CAN implementations and comprise both 2.0A (standard frames) and 2.0B (extended frames) standards. (PDF formate, 189 KByte, in English). You will find a choice of valuable information at www.bosch-semiconductors.com CAN on the internet For more information on CAN please visit the following websites: CAN in Automation e.V. The manufacturer and user organization CAN in Automation offers a wide range of information on CAN. In particular, you will find an overview of higher layer protocols here (e.g. CANopen).

Version Lite - Application à 1 seul canal - Pression positive ou négative - Différentes pressions et plages de mesure - Différentes langues de fonctionnement - En option avec interface ProfiNet et interface USB - Conception robuste et durable

The transducer unit µCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors. The integrated CAN interface supports CANopen and J1939 protocols. Bit rate and node-ID may be set via DIP switches inside the device or via LSS. Temperature thermo type J, K, L, N, R, T:Temperature Pt100/Pt1000 (2-wire) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.2 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Sensor error detection:Protocol CAN / CANopen / Raw CAN / J1939

Modern operating tables are miracles of precision. In laser eye surgery an accuracy to one thousandth of a millimetre is crucial. For other operation methods, lighting of the operating area is important. Also, smooth and precise movement of the operating table as well as reliability and durability of respirators are essential features. And precision is a matter of life and death. MicroControl has a long-term expertise in this kind of challenging applications and provides highly reliable solutions for medical equipment with precise control units and bus technology.

The µCAN.8.dio-SNAP is a freely configurable digital I/O module featuring 8 channels. Module ID and bit rate can be set via DIP switch or via CAN bus (LSS, CiA 305). The module supports the protocols CANopen CANopenFD and J1939. Digital input or output:Input or output freely configurable Output drivers can be supplied separately:Each output to be charged with max. 1 A Each output to be charged with max. 1 A:Fieldbus CAN / CAN FD Protocol CANopen / CANopen FD:Protocol CANopen / CANopen FD

The cable transmitter µCAN.1.sg-TRS is the universal data acquisition module for standard analogue full bridge strain gauge signals. The bridge is powered via the transmitter. The TRS family is ideally suited for being integrated directly in the measuring lines at a short distance from the sensor. Voltage ± 20 mV:Supply voltage 4.5 V Strain gauge full bridge:Accuracy 0.2% (FS) Resolution 16-bit (1 µV):Sampling rate up to 1kHz Fieldbus CAN classic / CAN FD:Protocol CANopen / CANopen FD / J1939

The SAE J1939 standard (Serial Control and Communications Heavy Duity Vehicle Network) has originally been designed by SAE International to be used in heavy duty vehicles. In the meantime, the protocol is widely used also in agricultural machinery, rail vehicles and sea vessels and in a wide range of diesel-driven machinery. Target group J1939 training The target group of the J1939 intensive workshop is development engineers who are looking for a quick start into handling the communications profile or would like to get an insight into the J1939 protocol stack. Also, we address decision makers and product managers to enable them to assess the suitability of the J1939 protocol stack for their applications.

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Temperature thermo type K:Accuracy +/- 0.5 K Resolution 16-bit (0.1 °C):Sampling rate 10 ms / 100 Hz Sensor error detection:Equipped with cold-junction compensation Operating temperatures -40…+85 °C:Power supply voltage 9…36 V DC Fieldbus CAN:Protocol CANopen / Raw CAN