Produktai skirti apdorojimo užsakymų grąžinimas (560)

Le polissage de miroir est un processus fascinant qui se traduit par une surface très réfléchissante et lisse, avec une finition semblable à un miroir. Le polissage fait référence à l’utilisation d’une action mécanique, chimique ou électrochimique pour réduire la rugoité de surface de la pièce à usiner pour obtenir une surface brillante et lisse. Le polissage miroir est non seulement utilisé à des fins esthétiques, mais aussi pour des applications pratiques telles que la réduction du frottement, l’amélioration de la résistance à la corrosion, et l’amélioration des performances du matériau. C’est un processus méticuleux qui demande de la patience et de la précision, mais le résultat final est une surface magnifiquement polie qui réfléchit la lumière comme un miroir.

La nitruration de l’acier inoxydable est un processus de traitement thermique chimique,: premièrement, la surface de l’acier inoxydable est nettoyée, déshuilée et sèche pour s’assurer que la surface est propre et exempte d’impuretés. Nitruration: l’acier inoxydable propre est soumis à une atmosphère contenant de l’azote, généralement à une température de 500 à 600 ° c. Au cours de ce processus, l’azote se décompose pour produire des atomes d’azote actifs qui se répandent par osmose vers la couche de surface de l’acier inoxydable pour former une couche d’alliage ferro-azote. Formation de couches nitrurées: après adsorption à la surface de l’acier inoxydable, les atomes d’azote se dissoudent pour former des solutions solides saturées d’azote en a-fe ou y-fe, puis des nitrures. Au cours de ce processus, l’azote est diffusé à partir de la couche saturée en surface vers la couche intérieure profonde de l’acier, formant une couche nitrurée à une certaine profondeur.

Ces produits sont fabriqués à partir d’alliage d’aluminium et ligne droite moletée, le processus de produit est beau.

These are the accssories made by aluminum,which is used in many fileds, such as building industry,door locks, door handles and so on .

These are the accessories used in Hydraulic valve assembly.

Le pliage de tôle est une méthode de traitement commune pour plier une feuille de métal dans la forme désirée. , des pièces automobiles aux matériaux de construction et aux appareils ménagers, sont très importants.Coupe: tout d’abord, utilisez une cisaille ou une découpeuse laser pour couper la feuille de métal dans les dimensions et les trous souhaités. Réglage des matrices et des poinçons: choisissez les matrices et poinçons appropriés dans la presse à cintrer. La forme de la filière doit correspondre au profil de flexion souhaité, tandis que la forme et la taille du poinçon doivent être compatibles. Parfois, des moules personnalisés sont nécessaires, en particulier pour les pliages complexes. Alignement de la feuille: assurez-vous que la feuille est correctement alignée avant de plier. Il faut s’assurer que la flexion se produit à l’angle correct par rapport à l’axe neutre. Force de flexion appliquée: pendant le processus de flexion, le poinçon de la machine presse la tôle dans le m

Ce sont les pièces utilisées dans les accessoires de machines.

These parts are used for printer accessories.

These parts are milled by aluminum,which used in architectural decoration industry.

Grandes pièces usinées en plastique noir.

The precoat filter is a filter dome equipped with filter cartridges, which is fed discontinuously with contaminated oils (or solutions) via filter pumps. In the first step, a filter aid suspended in the oil (e.g. cellulose, diatomaceous earth, perlite, etc.) is floated onto the filter carriers (filter cartridges) and a filter cake layer is formed. The pores of this filter aid layer are much finer than those of the filter carriers and thus enable fine filtration. Once the precoat layer has formed, the process is automatically switched to filtration mode. The contaminated liquid is now passed through the filter layer of the filter cartridges from the outside to the inside, filtering out the dirt particles it contains. When a predefined differential pressure is reached (or after a set time has elapsed), the filter elements are cleaned by an automatic backwash and are ready for a new filter cycle. Structure: • The precoat filter consists of a filter dome and a cartridge plate in which the filter cartridges are mounted vertically • The cartridge plate separates the lower dirt area of the filter from the upper clean area in the dome cover • The inlets of the contaminated medium and the precoat line for the oil/filter aid mixture flow into the lower dirt area • The outlet opening for the sludge drain is located at the lower end of the filter dome • The outlet line for returning the filtrate to the clean tank or to the precoat tank leads from the upper clean area of the dome cover Functionality: •Precoating the filter cartridges with a filter aid (e.g. cellulose, diatomaceous earth, perlite or carbon products) • Feeding the liquid to be filtered into the lower section of the ASF • Filtration of the contaminated liquid through the filter layer • Filtrate emerges from the upper dome cover • If the predefined differential pressure or the preset max. filter time, the filtration process is interrupted and automatic backwashing is started • Washing off the dirt-laden filter aid with the liquid dominate to the wash-off tank • The sludge is processed by a secondary unit Typical use cases: The precoat filter system is ideal for ultra-fine cleaning of liquids, e.g. for: • Fine filtration of cooling lubricants (oil) for: - Grinding, honing and cold rolling processes - Finishing, lapping, eroding - Presses and rollers - In beer production, aqueous solutions, water treatment etc. Customer benefits: • High filtration capacity with low space requirement • Highest achievable filtrate quality • Modular design and expansion of the overall system possible • Fully automatic operation Technical data: • Filter fineness [µm]: approx. 10 • Size [m² filter area]: 10,0-67,0 • Throughput [l/min]: 300-4,000 • Higher system outputs are also possible by connecting several filters in series

The pressure belt filter (PBF) is a fully automatic cooling lubricant filter that is fed discontinuously with contaminated cooling lubricant via filter pumps. The coolant to be filtered is pressed through the filter medium with overpressure. The cooling lubricant is cleaned via a circulating or reversing filter medium or via fiber fleece as a consumable. After free discharge into a clean tank, the cleaned cooling lubricant is available again to supply production. The filtered dirt cake is blown dry in the pressure belt filter and then discharged for chip disposal. Structure: • Pressure-monitored, upper dirt chamber/pressure chamber for holding the cooling lubricant contaminated with dirt particles with pressure monitoring. • Horizontal filter belt support to separate the upper pressure chamber from the lower filtrate drain chamber • Lower filtrate drain chamber for collecting the cleaned cooling lubricant • Front sealing flaps on both sides, pneumatically operated • Filtrate drain at the side or bottom • Completely pre-assembled, short assembly and set-up times Functionality: • Fully automatic • Continuous operation (with the exception of a short-term filter regeneration phase) • Filtration by pressure in the upper pressure chamber and flow of the cooling lubricant through the filter medium into the filtrate drain chamber • Initiation of filter regeneration by pressure measurement or time lapse • Dry blowing of the dirt cake before discharge • Fully automatic belt cleaning with brush or beater shaft and belt rinsing • Filter belt circulating or reversing, alternatively with fleece operation Typical use cases: • Cleaning of contaminated cooling lubricants during metalworking. Typical is the processing of various sludges from rough machining, especially steel, aluminum and grinding sludges (fine steel wool) • Machining processes with: - Cutting chips, fine and short - Sanding swarf and sanding sludge • Can also be used as a secondary filter/post-filter • Oil filtration - Optionally with additional filter aid • Filtration of washing water in metalworking Customer benefits: • High throughput due to overpressure in the upper chamber • No backwashing during regeneration • Minimal set-up time due to completely pre-assembled delivery • Modular design and expansion of the overall system possible Technical data: • Filter fineness [µm]: 120-30 • Filter surface size [m²]: 3.0-6.0 • Throughput [l/min]: 100-12,000

Our folding belt filter (FBF) is a special version of a pressure band filter. As a fully automatic coolant filter, our FBF is intermittently supplied with contaminated coolant via filter pumps. The coolant to be filtered is pressed through the filter medium under pressure. The coolant is cleaned through a circulating filter medium or through a consumable fiber fleece material. After being freely discharged into a clean tank, the cleaned coolant is available again to supply production. The filtered sludge cake is blown dry in the KBF and then removed for chip disposal Structure: • Pressure-monitored upper dirt container/pressure vessel for receiving the coolant contaminated with dirt particles, with pressure monitoring • Horizontal filter band support to separate the upper pressure vessel from the lower filtrate discharge container • Lower filtrate discharge container for collecting the cleaned coolant. • Swivel/lift upper chamber, pneumatically operated. • The filtrate is discharged laterally Functionality: • Fully automatic. • Continuous operation (except for a short-term filter regeneration phase). • Filtration through pressure in the upper pressure vessel and flow of the coolant through the filter medium into the filtrate discharge container. • Initiation of filter regeneration through pressure measurement or time elapsed. • Dry blowing of the sludge cake before discharge. • Fully automatic band cleaning with brush or flail shaft and band rinsing. • Extensive filter band, optionally also with fleece operation. Typical application cases: • Cleaning of contaminated coolants during metalworking. Typical is the processing of various sludges from rough machining, especially from steel or aluminum and grinding sludges (fine steel wool) • Machining processes with: - Chips, fine and short - Grinding chips and grinding sludge • Can also be used as a secondary filter/post-filter • Oil filtration Customer benefits: • The system requires up to 80% less space than a conventional flat band filter, without compromising filtration performance and even with a higher cleaning performance • Long service life and high throughput performance • Low space requirement • Low maintenance effort • Low investment costs • Completely pre-assembled, short assembly and setup times Technical data: • Filter fineness [µm]: 120-5 • Filter area [m²]: 1.5 • Throughput* [l/min]: 50-2,000

For direct loading of one or more containers or rail wagons, KÖBO ECO>PROCESS creates sophisticated concepts for the temporary storage of chips or sheet metal scrap. We develop solutions that ensure optimum filling of the containers/wagons depending on the fill level. Rotating or swivel chutes, movable conveyors or a combination of different systems are used here. Structure: • Rotary slide with toothed ball bearing slewing ring or chain drive • Trouser slide with swivel flap and drive via shaft-mounted geared motors • Both systems can be bolted directly to the feeding conveyor or supported on a separate steel structure • Movable conveyors can also be used for container/wagon loading Functionality: • Slide positioning via end positions possible • Control of various discharge points for uniform container filling via end positions or fill level-controlled timing Typical use cases: • Sorting and loading of bulk goods • A sprung version is possible for heavy unit loads, e.g. chip briquettes Customer benefits Customer benefits: • Single-variety transportation and loading of different materials • Robust design • Low operating effort due to fully automatic filling • Low maintenance Technical data: • Sliding inclination depending on the conveyed goods and container size • Rotation angle (for swivel chutes) depending on the container arrangement

The µCAN.4.ti-BOX features 4 inputs for measuring temperature sensors such as RTD and thermocouples with 400 Hz total sampling rate. The CAN interface supports the protocols CANopen and J1939.Temperature Thermo type J, K, N, R, T Temperature Thermo type J, K, N, R, T:Temperature Pt100, Pt200 (2- / 4-wire) Temperature Pt500, Pt1000 (2- / 4-wire):Accuracy +/- 0.1 K Resolution 16-bit (0.1 °C):Sampling rate 10 ms / 400 Hz Fieldbus CAN:Protocol CANopen / Raw CAN

The µCAN.4.ai-F1 is the versatile universal measuring module for analogue standard signals. The module is designed to measure +/- 40 V or -20…+20 mA signals at an overall sampling rate of 4 kHz. Strain gauge full bridge:Voltage +/- 60 mV Supply voltage 4.096 V:Accuracy 0.01 % (FS) Resolution 24-bit (0.01 µV):Sampling rate 1.25 ms / 800 Hz Parameterized via set-up software:Casing powder coated Fieldbus CAN:Protocol Raw CAN

The J1939 protocol stack offers the complete functionality for integration of the SAE J1939 standard into your devices. Versatile configuration options facilitate individual customization to a target product. Example codes facilitate the startup phase, enabling the user to focus on the implementation of their own application. The open CAN driver (CANpie) provides the flexibility to use any CAN controller available on the market. The bridge function to the CANopen Slave protocol stack facilitates realization of devices with multi protocol capability. In addition, less development time is needed for the implementation of parameters as these are addressed by all protocols in the same way.

The µCAN.explorer is a universal monitor used to supervise data streams within a CAN network. The single messages are assigned individual names (symbols) in order to ensure a clear and simple classification The integrated data logger facilitates the data stream being acquired and saved onto the bus.Display of all received messages with indication of ID, length and data bytes Display of all received remote-frames as well as indication of their number and reception interval Storing and loading of compiled sender lists for emulating different CAN nodes Errors of the CAN bus and the controller are indicated, including error-frame-counter Supports various file formats, incl. Float according to IEEE754 and enumerations (Enums), byte order adjustable to Intel and Motorola format

The sensor module µCAN.1.ti-SENSOR can be joined with any sensor and is designed to acquire an analogue temperature signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances can be adjusted with the module already built in. The sensor signal is linearized and monitored directly in the hardware.Temperature Thermo type J, K, L Temperature Pt100, Pt1000 (2-wire) Accuracy ± 0.5 K (Thermo) Accuracy ± 0.2 K (Pt100) Resolution up to 16-bit (0.1 K) Sampling rate up to 1 kHz Signal type freely configurable Sampling rate adjustable Operating temperatures -40 °C … +85 °C Power supply voltage 9 V DC … 36 V DC Fieldbus CAN classic / CAN FD Protocols CANopen / CANopen FD / J1939

Until a vehicle gets road-permission, a number of measurement taske have to be fulfilled along the development chain. During vehicle testing in extreme conditions – in prototyping and pilot series e.g. – MicroControl systems offer the necessary performance and often are an efficient alternative to expensive measurement technology. A variety of different measurement spots in a car can be realized as well as modular test facilities for motors using the 19″ slide-in units.

The decentralized module µCAN.6.ai-SNAP is designed to acquire up to 6 analogue current / voltage signals and converts them into digital CAN signals. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.02 % (FS):Resolution 16-bit (1 mV / 1 µA) Sampling rate 20 ms / 50 Hz:Screw connection via plug-in connectors Fieldbus CAN:Protocol CANopen / Raw CAN

You would like to get to know the performance options of the µMIC.200? Our starter kit facilitates a quick start into programming the control unit µMIC.200. Just unpack, get connected and start programming with Node-RED or in C/C++.Control unit µMIC.200 Mains adapter Digital CANopen I/O module Connecting cable Quickstart

The CANopen / CANopen FD Slave protocol stack has been optimized for low resource requirements and is, thus, well suited for intelligent sensors and actuators. The protocol stack offers the complete functionality for integration of the CANopen standards CiA 301 (FD: CiA 1301) and CiA 305 into your devices. The following CANopen services are supported

The interface µCAN.pc.USB provides an easy and cost-saving connection of a CAN network to a PC. The CAN-to-USB converter is equipped with a plastic casing and due to its small size ideally suited to be used with laptops and notebooks.Bit rate setting up to 1 MBit/sec Space saving adaptor casing with USB cable and 9-pole D-Sub for CAN CAN plug D-Sub 9-poles Complies with CAN-specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID)

The decentralized module µCAN.4.ao-BOX features four analogue outputs which optionally provide a voltage signal (+/- 10 V) or a current signal (0…20 mA). The CAN interface supports the protocols protocols CANopen and J1939. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz:Signal type freely configurable Fieldbus CAN:Protocol CANopen / Raw CAN / J1939

The µCAN.1.ti-BOX is the single channel solution for the acquisition of temperature signals. Resistance sensors as well as thermocouples may be connected to the module. The CAN interface supports the protocol CANopen. Temperature Thermo type J, K, L:Temperature Pt100 (2- / 4-core) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.1 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Fieldbus CAN:Protocol CANopen / Raw CAN

This pioneering controller goes far beyond the functionality of conventional PLC controllers. As an all in one IoT gateway, CANopen automation controller and top-hat rail PC, the µMIC.200 offers an end-to-end solution. Operating temperature range:-40 °C ... +85 °C Memory:FRAM (battery-free) Power supply voltage:9 ... 36 V DC Operating system:Real-time Linux Programming:Node-RED, C/C ++

Every company is a world of its own and has its specific challenges. Based on our 25 years of expertise and in close liaison with you, we will analyse the current situation and future requirements to set up a specific training programme on ICA, BUS and control technology issues – tailored to your requirements and level of knowledge. Alternatively, we also offer standard training courses on CAN-bus basics, CANopen and J1939 for your company either as online webinar or as an in-house workshop at your site.

At its eight outputs the µCAN.8.pwm-BOX provides pulse width modulated signals (PWM) within a range of 0% to 100% for controlling of actuators (valves etc.). The outlets are overload and short circuit protected. The µCAN.8.pwm-BOX is connected with the central control unit via CAN bus. PWM output:Basic frequency 40 Hz … 5 kHz Mark-to-space ratio 0.0 % … 100.0 %:Each output to be charged with max. 1.4 A 3-wire connector terminal:Output drivers supplied separately Fieldbus CAN:Protocol CANopen / Raw CAN

The sensor module µCAN.1.ai-SENSOR is designed to acquire an analogue signal. It can be integrated directly in the sensor head (18 mm in diameter). Sensor tolerances are adjustable. The sensor signal is linearized and monitored directly in the hardware.Voltage ± 10 V Current 0 mA … 20 mA Accuracy 0.005% (FS) Resolution 16-bit (1 mV / 1 µA) Sampling rate up to 1 kHz Scaling adjustable Sampling rate adjustable Measurement range adjustable Operating temperatures -40°C to +85 °C Supply voltage 9 V DC to 36 V DC Fieldbus CAN Classic / CAN FD Protocol CANopen / CANopen FD / J1939